No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

E9000 Server V100R001 HMM Alarm Handling 19

This document describes E9000 server alarms in terms of the meaning, impact on the system, possible causes, and solutions.
Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Purpose

This document describes E9000 server alarms of all hardware devices in the chassisin terms of the meaning, impact on the system, possible causes, and solutions.

Table 1 shows the components involved in alarms.

Table 1 Components involved in alarms

Type

Name

Management module

MM910

Fantray module

Fan

PSU module

PSU

Compute node

  • CH121, CH140, CH220, CH221, CH222, CH223, CH240, CH242
  • CH121 V3, CH121H V3, CH140 V3, CH220 V3, CH222 V3, CH225 V3, CH226 V3, CH242 V3, CH242 V3 4HDD, CH242 V3 8HDD, CH242 V3 DDR4
  • CH121 V5, CH121L V5, CH225 V5, CH242 V5

Switch module

CX110, CX111, CX116, CX210, CX220, CX310, CX311, CX312, CX317, CX318, CX320, CX610, CX611, CX620, CX621, CX710, CX820, CX910, CX912, CX913, CX915, CX916, CX916L, CX920

Intended Audience

This document is intended for:

  • Technical support personnel
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol Conventions

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

19

2018-08-10

Adjust the document format.

18

2018-05-28

The 120004FF alarm is modified.

17

2018-03-30

The hwStorageUtilizationRisingAlarm alarm is modified.

16

2018-01-30

Sensor information is supplemented.

The optical module alarm is added.

15

2017-09-15

CX320 Switch Module Alarms is added.

CX920 Switch Module Alarms is added.

ALM-0741FF28 Transition to Non-critical From OK is modified.

14

2017-03-30

ALM-1B01FFFF Major Alarm Caused by Config Error is added.

13

2016-12-05

ALM-1B01FFFF Easylink Config Error is added.

12

2016-10-28

CX11x, CX31x, CX710, and CX91x Switch Module Alarms (Software Version 1.2.1.0.39 or Later) is updated.

11

2015-05-08

ALM-0149FF01 Major Alarm Caused by Overtemperature is modified.

10

2015-02-16

ALM-2100FFFF Power Supply Failure (Power Status) is modified.

09

2014-11-10

CX910, CX911, CX912, and CX913 Switch Module Alarms (Software Versions 2.23, 2.26, and 2.29 and Those Earlier Than 1.2.1.0.39), CX110 and CX31x Switch Module Alarms (Software Versions Earlier Than 1.2.1.0.39) and CX11x, CX31x, CX710, and CX91x Switch Module Alarms (Software Version 1.2.1.0.39 or Later) are modified.

08

2014-09-15

"Tecal" is deleted.

07

2014-07-30

CX11x, CX31x, CX710, and CX91x Switch Module Alarms (Software Version 1.2.1.0.39 or Later) is added.

06

2014-02-15

Possible Causes in ALM-1B01FFFF Major Alarm Caused by Config Error are modified.

05

2014-01-01

ALM-2C01FFFF FRU Inactive is added.

04

2013-11-18

Possible Causes in ALM-1B01FFFF Major Alarm Caused by Config Error are modified.

03

2013-06-01

New sensors are added to ALM-0147FF01 Minor Alarm Caused by Overtemperature.

New sensors are added to ALM-0149FF01 Major Alarm Caused by Overtemperature.

New sensors are added to ALM-0701FFFF Critical Alarm Caused by High CPU Core Temperature.

New sensors are added to ALM-0142FF02 Major Alarm Caused by Undervoltage.

New sensors are added to ALM-0149FF02 Major Alarm Caused by Overvoltage.

New sensors are added to ALM-0705FFFF Critical Alarm Caused by a CPU Configuration Error.

02

2013-04-01

CX110 and CX31x Switch Module Alarms (Software Versions Earlier Than 1.2.1.0.39) is added.

MM910 Alarm Syntax is added.

Switch Module Alarm Syntax is added.

Alarm Information is modified, and new alarm severity is added.

Alarm Syntax is deleted, and the original content is divided into MM910 Alarm Syntax and Switch Module Alarm Syntax.

01

2013-01-04

This issue is the first official release.

Traducción
Descargar
Updated: 2018-08-16

N.° del documento: EDOC1000015902

Vistas:69106

Descargas: 1410

Average rating:
This Document Applies to these Products
Documentos relacionados
Share
Anterior Siguiente