No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

E9000 Server V100R001 iMana 200 User Guide 16

This document describes the baseboard management controller (BMC), which is the underlying management software, of the Tecal E9000 server. After reading this document, you can learn the function modules of the server BMC, detailed functions provided by each module, relationships between modules, and all operation commands used in the BMC.
Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Intended Audience

This document describes the bottom-layer management software iMana 200 of the servers and includes the following:

  • Detailed functions of each module.
  • Relationships between modules.
  • Detailed description of the WebUI.
  • All operation commands used on the iMana 200.

This document applies to compute nodes CH121, CH140, CH220, CH221, CH222, CH240, CH242, and CH242 V3.

This document is intended for:

  • Server installation engineers
  • Server maintenance engineers

You are required to be a professional engineer in the server field, who has been trained and is able to identify danger levels when operating the server.


This document describes only the commands required when you use Huawei devices to deploy and maintain a network.

The commands used for manufacturing, assembling, and factory inspection and repair are not described in this document.

Some advanced commands are used only for engineering implementation or fault locating. The inappropriate use of these commands may result in device faults or service interruption. Therefore, these commends are not described in this document. If you require information about these commands, apply to Huawei.

Symbol Conventions

The following table lists the symbols that may be found in this document.



Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Update History

Updates between document issues are cumulative. Therefore, the latest document issue contains all updates made in previous issues.


Release Date


16 2018-11-05

Updated System Events.

15 2018-08-08

Updated Power Control.

14 2018-07-05

Added Failed to Open the Remote Virtual Console.

13 2018-05-30

Updated Remote Control.

12 2018-03-30

Added the description of the iMana 200 version.

11 2017-23-29

Added Querying and Setting Port Negotiation Self-Healing Status (resumephy).

10 2017-11-10

Updated iMana 200 Overview and Black Box.

09 2017-01-25

Added GUID Not Updated After Server Mainboard Replacement.

08 2016-07-08

Added Batch Information Collection Description.

07 2015-06-25

Updated Fault Diagnosing.

06 2015-03-05
  • Added the WebUI description.

  • Changed the manual name to E9000 Server V100R001 iMana 200 User Guide.

  • Added the Command Maintenance Commands section.

05 2014-03-03

Modified the community name.

04 2013-08-22

Added the description of application range of commands.

03 2013-06-01
02 2013-04-01

Modified the frucontrol parameter.

01 2013-01-04

This issue is the first official release.

Updated: 2018-11-21

N.° del documento: EDOC1000015904


Descargas: 1491

Average rating:
This Document Applies to these Products
Documentos relacionados
Anterior Siguiente