eSpace UC Configuration Cases

Publication Date:2016-05-13 Views:3554 Downloads: 391 Document No.: DOC1000020306 Description:
Contents

Title Page

About This Document

Contents

Configuring the Single-Node Network

Configuring the Multi-Node Centralized Call Management Network

Configuring the eSpace U1980s Deployed in Active Standby Mode

Interoperability Configration between Unified Gateway and Cisco UCM

Interoperability Configration between Unified Gateway and Avaya IPT

Interoperability Configuration Between Unified Gateway and RADIUS

Interoperability Configuration Between eSpace U1981 and the IMS

Interoperability Configuration Between the eSpace UC and the Telepresence System

Configuring User Sections

Configuring the Fax Service

Configuring Time Synchronization

Configuring Local Languages

Configuring Toll Fraud Prevention

Configuration for DDI Incoming and Outgoing Calls Through the IAD FXO Interface

Configuration for DDI Incoming and Outgoing Calls Through the AT0 Trunk

Configuration for Long Numbers and Short Numbers

Configuration for Intelligent Routes

Configuration for the Scenario of Multiple Secretaries for Multiple Managers

Configuring Outgoing Call Routing Through the AT0 Trunk

Configuring Outgoing Call Routing Through the PRA Trunk

Dual Registration of IP Phones (with DNS Deployed)

Dual Registration of IP Phones (with SBC Deployed)

IP Phone Deployment Using eSight

IP Phone Configuration Using DHCP Option 246 (Recommended When Asterisk or BroadSoft is Used)

IP Phone Deployment Using DMS (Recommended When the Core Network IMS Is Used)

Interoperability Configuration Between eSpace 7900 Series IP Phones and Asterisk

Related Documents