No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

S9300 and S9300E Product Description

This document describes the positioning, characteristics, architecture, link features, service features, application scenarios, operation and maintenance functions, and technical specifications of the switch.
Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Intended Audience

This document is intended for network engineers responsible for network design and deployment. You should understand your network well, including the network topology and service requirements.

Privacy Statement

The switch provides the mirroring function for network monitoring and fault management, during which communication data may be collected. Huawei will not collect or save user communication information independently. Huawei recommends that this function be used in accordance with applicable laws and regulations. You should take adequate measures to ensure that users' communications are fully protected when the content is used and saved.

The switch provides the NetStream function for network traffic statistics collection and advertisement, during which data of users may be accessed. You should take adequate measures, in compliance with the laws of the countries concerned and the user privacy policies of your company, to ensure that user data is fully protected.


This document is designed as a reference for you to configure your devices. Its contents, including web pages, command line input and output, are based on laboratory conditions. It provides instructions for general scenarios, but does not cover all use cases of all product models. The examples given may differ from your use case due to differences in software versions, models, and configuration files. When configuring your device, alter the configuration depending on your use case.

The specifications provided in this document are tested in lab environment (for example, a certain type of cards have been installed on the tested device or only one protocol is run on the device). Results may differ from the listed specifications when you attempt to obtain the maximum values with multiple functions enabled on the device.

Symbol Conventions

The symbols that may be found in this document are defined as follows.



Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Updated: 2018-08-31

N.° del documento: EDOC1000027369


Descargas: 494

Average rating:
This Document Applies to these Products
Documentos relacionados
Anterior Siguiente