No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

Huawei Server iMana 200 User Guide 20

This document describes the underlying management software iMana 200 of the servers.
Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Intended Audience

This document describes the bottom-layer management software iMana 200 of the servers and includes the following:

  • Detailed functions of each module.
  • Relationships between modules.
  • Detailed description of the WebUI.
  • All operation commands used on the iMana 200.

This document is used for these products:

  • Rack Servers: RH1288 V2, RH2265 V2, RH2268 V2, RH2285 V2, RH2285H V2, RH2288 V2, RH2288E V2, RH2288H V2, RH2485 V2, RH2488 V2, RH5885 V2, RH5885 V3, RH5885H V3.
  • X6000 Server Nodes: XH310 V2, XH311 V2, XH320 V2, XH321 V2, XH621 V2.
  • X8000 Server Nodes: DH310 V2, DH320 V2, DH321 V2, DH620 V2, DH621 V2, DH626 V2, DH628 V2.

This document is intended for:

  • Server installation engineers
  • Server maintenance engineers

This document describes only the commands required when you use Huawei devices to deploy and maintain a network.

The commands used for manufacturing, assembling, and factory inspection and repair are not described in this document.

Some advanced commands are used only for engineering implementation or fault locating. The inappropriate use of these commands may result in device faults or service interruption. Therefore, these commends are not described in this document. If you require information about these commands, apply to Huawei.

You are required to be a professional engineer in the server field, who has been trained and is able to identify danger levels when operating the server.

Symbol Conventions

The following table lists the symbols that may be found in this document.



Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Update History

Updates between document issues are cumulative. Therefore, the latest document issue contains all updates made in previous issues.




20 2018-11-05

Updated System Events.

19 2018-08-08

Updated Power Control and Collecting Maintenance Files in One-click Mode (maintenance -d imtool).

18 2018-07-05

Added section Failed to Open the Remote Virtual Console.

17 2018-05-30

Updated Remote Control.

16 2018-03-30

Updated Power Control.

15 2018-02-01

Updated Capturing the Screen (printscreen).

14 2017-12-29

Updated LDAP, User Login, and Logging In to the iMana 200 WebUI.

13 2017-11-10

Updated Black Box.

12 2017-07-28

Updated NTP.

11 2017-05-20

Updated Downloading the BIOS (maintenance -d downloadbios).

10 2017-01-25

Added section GUID Not Updated After Server Mainboard Replacement.

09 2016-08-29

Updated Obtaining Help Information (help).

08 2016-07-08

Updated Logging In to the iMana 200 WebUI.

07 2015-08-26

Updated Local User.

06 2015-06-25

Updated System Boot Option.

05 2015-03-05

This issue is the fifth official release.

04 2015-01-14

This issue is the fourth official release.

03 2014-06-15

Add the contents about WebUI.

02 2014-03-03

This issue is the second official release.

01 2014-01-27

This issue is the first official release.

Updated: 2018-11-21

N.° del documento: EDOC1000038843


Descargas: 8071

Average rating:
This Document Applies to these Products
Documentos relacionados
Anterior Siguiente