No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

RH8100 V3 Server V100R003 User Guide 27

This document describes the appearance, specifications, parameters, and structure of the RH8100 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Purpose

This document describes the appearance, functions, and structure of the RH8100 V3, and how to install, remove, power on, power off, and configure the RH8100 V3, and perform other common operations on the RH8100 V3.

This document provides guidance for you to manage the RH8100 V3.

Intended Audience

This document is intended for:
  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

27

2018-11-20

Optimized the document.

26

2018-10-16

Added Sensor List.

25

2018-09-03

Updated Switching from the Single-system to the Dual-system and Switching from the Dual-system to the Single-system.

24

2018-07-23

Added the mapping between CPUs and HFCs.

23

2018-06-13

Added Removing the Rear I/O Board and Installing the Rear I/O Board.

22

2018-05-08

Updated Connecting a Ground Cable.

21

2018-02-26

Updated Logical Structure.

20

2017-11-30

Updated Changing an iBMC User Password.

19

2017-08-31

Updated Configuring the BIOS.

18

2017-07-20

Updated Configuring the BIOS.

17

2017-05-25

Updated Technical Specifications.

16

2017-04-22

Updated Connecting a Ground Cable.

15

2017-03-17

Updated Compute Module.

14

2017-01-20

Updated Appearance.

13

2016-11-20

Added Product Specifications.

12

2016-10-20

Added Replacing the FM-D and Its Internal Components.

11

2016-10-08

Updated Ports.

10

2016-06-01

Updated Physical Structure.

09

2016-05-10

Updated Appearance.

08

2016-03-29

Updated Appearance.

07

2016-01-18

Updated Logical Structure.

06

2015-11-10

Updated Physical Structure.

05

2015-05-20

Combined the RH8100 V3 Server Installation Guide and RH8100 V3 Server Troubleshooting to form the RH8100 V3 Server User Guide.

04

2015-01-08

Added a note for PXE configuration in Configuring the BIOS.

03

2014-11-20

Added the description of the FM-B in Front I/O Module.

02

2014-10-25

Updated Physical Structure.

01

2014-10-15

This issue is the first official release.

Traducción
Descargar
Updated: 2018-11-23

N.° del documento: EDOC1000055733

Vistas:27021

Descargas: 924

Average rating:
This Document Applies to these Products
Documentos relacionados
Share
Anterior Siguiente