No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

RH1288 V3 Server V100R003 User Guide 29

Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Purpose

This document describes the appearance, features, and specifications of the RH1288 V3 and how to install and remove the server and its parts, power on and off, configure, and troubleshoot the server.

Read this document before operating the RH1288 V3.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all changes made in previous issues.

Issue

Date

Description

29

2018-08-17

Added the procedure for removing a holding rail. For details, see Removing the Server.

28

2018-07-12

Added procedures for removing and installing an SD card and related precautions. For details, see Removing an SD Card Board and Installing an SD Card Board.

27

2018-05-29

Changed LOM and NIC to flexible NIC.

26

2018-05-10

Modified fan module removal and installation procedures. For details, see Removing a Fan Module and Installing a Fan Module.

25

2018-04-10

Modified RAID controller card supercapacitor removal and installation procedures. For details, see:

24

2018-02-22

Added the description about how to import and export the iBMC/BIOS configuration information after the mainboard is replaced. For details, see 7.43 Removing the Mainboard and 7.44 Installing the Mainboard.

23

2018-01-15

Added the locations of dual SD cards. For details, see 7.49 Removing an SD Card.

22

2017-12-12

21

2017-10-26

20

2017-09-26

Changed optional chip types. For details, see 2.7 Internal Cabling.

19

2017-08-15

Optimized chapters about parts replacement. For details, see 7 Replacing Parts.

17

2017-07-20

Added the description about 128 GB DIMMs. For details, see 2.5 Physical Structure and 2.11 Technical Specifications.

17

2017-06-20

Added internal cable BOMs. For details, see 2.7 Internal Cabling.

16

2017-05-10

Modified the mainboard layout description. For details, see 2.6 Mainboard Layout.

15

2017-04-05

Modified front bezel description. For details, see 7.3 (Optional) Removing the Front Bezel and 7.4 (Optional) Installing the Front Bezel.

14

2017-03-03

Modified the configuration description. For details, see 2.1 Overview.

13

2017-01-24

Added description about the PCH configuration supported by NVMe models. For details, see 2.1 Overview.

12

2016-11-29

Modified the indicator status description of the NVMe PCIe SSD installation. For details, see 7.8 Installing an NVMe PCIe SSD.

11

2016-11-01

Added the operating temperature description when 64 GB DIMMs are configured. For details, see 2.12 Physical Specifications.

10

2016-08-31

Added LAN on motherboard (flexible NIC) indicators. For details, see 2.2 Appearance and 2.4 Indicators and Buttons.

09

2016-07-30

Modified the description of the indicators on a flexible NIC with two 10GE electrical ports.

08

2016-07-21

07

2016-03-30

06

2015-11-06

Added the procedures for removing and installing a front bezel. For details, see 7.3 (Optional) Removing the Front Bezel and 7.4 (Optional) Installing the Front Bezel.

Added internal cabling. For details, see 2.7 Internal Cabling.

05

2015-06-10

Added the procedure for removing the RH1288 V3 installed on the holding rails. For details, see 7.11 Removing the Chassis Cover.

04

2015-03-27

Added product specifications. For details, see 2.11 Technical Specifications.

03

2014-12-30

Modified the product name.

02

2014-12-10

Added the guide rail requirements on the chassis. For details, see 2.12 Physical Specifications.

01

2014-08-30

This issue is the first official release.

Traducción
Descargar
Updated: 2018-08-28

N.° del documento: EDOC1000056730

Vistas:41315

Descargas: 6647

Average rating:
This Document Applies to these Products
Documentos relacionados
Share
Anterior Siguiente