No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

X6800 Server HMM Command Reference 09

Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Purpose

This document describes the underlying management software Hyper Management Module (HMM).

After reading this document, you can learn about the HMM functional modules, functions provided by each module, relationships between the modules, and all operation commands used on the HMM.

This document is used for the management module of X6800 server.

Intended Audience

This document is intended for:

  • Server installation engineers
  • Server maintenance engineers
NOTE:

This document describes commands for network deployment and maintenance of Huawei equipment.

This document does not include the commands for production, assembly, or detection of returned or repaired parts.

Incorrect use of the commands for engineering or fault location may cause device exceptions or service interruption. Contact Huawei technical support if you need to use these commands.

Only the professional or qualified personnel who can identify dangers in the server field can run the commands described in this document.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

09

2018-10-26

This issue is the ninth official release.

08

2018-05-28

This issue is the eighth official release.

07

2018-03-30

This issue is the seventh official release.

06

2017-04-07

This issue is the sixth official release.

05

2017-02-20

This issue is the fifth official release.

04

2016-11-20

This issue is the fourth official release.

03

2015-11-10

This issue is the third official release.

02

2015-07-13

This issue is the second official release.

01

2014-11-27

This issue is the first official release.

Traducción
Descargar
Updated: 2018-11-06

N.° del documento: EDOC1000066338

Vistas:11473

Descargas: 751

Average rating:
This Document Applies to these Products
Documentos relacionados
Share
Anterior Siguiente