No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

Administrator Guide 12

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Purpose

This document describes how to perform daily management and basic maintenance of the OceanStor 5300 V3/5500 V3/5600 V3/5800 V3/6800 V3 storage systems. It also provides configuration and standards for your reference.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 12 (2018-05-30)

This issue is the twelfth official release. The updates are as follows:
  • Optimized some descriptions.

Issue 11 (2018-02-05)

This issue is the eleventh official release. The updates are as follows:
  • Optimized description about sections Configuring Domain Authentication for a Storage System.
  • Optimized description about sections Configuring a Security Policy.

Issue 10 (2017-11-30)

This issue is the tenth official release. The updates are as follows:
  • Optimized description about sections Bonding Ethernet Ports.

Issue 09 (2017-10-30)

This issue is the ninth official release. The updates are as follows:
  • Optimized description about the value starts of Base DN.
  • Optimized description about section Setting Domain Authentication Server Information.

Issue 08 (2017-07-20)

This issue is the eighth official release. The updates are as follows:
  • Added sections Creating a SmartErase Task, Deleting a SmartErase Task, and Logging In to the CLI of the Storage System Using a Public Key.
  • Optimized the power-off process description in section Powering off the Storage Device.

Issue 07 (2017-05-10)

This issue is the seventh official release. The updates are as follows:
  • Added the section of Creating an LDAP User or User Group that describes how to configure LDAP users or user groups.
  • Updated the section of Setting the Syslog Notification (Applicable to V300R003C20) and added descriptions about how to configure Syslog server and CA certificates.
  • Added FAQ What are the principles used to expand the capacity of a file system for which the remote replication service is configured?

Issue 06 (2017-03-27)

This issue is the sixth official release. The updates are as follows:
  • Deleted descriptions about SUSE 9 operating systems.
  • Deleted the requirement that IP addresses of management network ports on all controllers must be in the same network segment from the section of Changing IP Addresses of Management Network Ports Using a Serial Port.

Issue 05 (2016-11-20)

This is the fifth official release. Information about V300R003C20 is added. The following lists the added and updated contents:
  • Added the section of Changing IP Addresses of Management Network Ports Using DeviceManager.
  • Updated descriptions about default subnet masks of management network ports on 2 U controller enclosures.
  • Added the section of Initially Configuring the Storage System (Applicable to V300R003C20) and information about domain names supported by NTP server addresses.
  • Added the section of Configuring a Storage System to Add It to an LDAP Domain (Applicable to V300R003C20) and updated screenshots and descriptions about interface parameters.
  • Added the section of Configuring a Security Policy (Applicable to V300R003C20) and the password policy that The new password cannot be the default password.
  • Added the section of Changing Password (Applicable to V300R003C20) and descriptions about changing passwords forcibly upon next login.
  • Added the section of Modifying Alarm Dump Settings (Applicable to V300R003C20) and information about domain names supported by alarm dump server addresses.
  • Added the section of Managing Trap Server Addresses (Applicable to V300R003C20) and information about domain names supported by Trap server addresses.
  • Added the section of Setting the Syslog Notification (Applicable to V300R003C20) to describe the configuration procedure of syslog notification in the certificate verification mode.
  • Update some specifications of the equipment room.
  • Added the section of Modifying the Settings for Dumping Performance Monitoring Statistics (Applicable to V300R003C20) and information about domain names supported by addresses of performance data dump servers.
  • Added the section of Logging In to the CLI of the Storage System Using a Public Key.
  • Added the section of Setting the Device Time (Applicable to V300R003C20) and information about domain names supported by NTP server addresses.

Issue 04 (2016-07-25)

This is the fourth official release.

Optimized some description.

Issue 03 (2016-04-30)

This is the third official release. The updates are as follows:

  • Added the configuration procedure of anti-virus services.
  • Added the description of how many times should DHA logs be exported from DeviceManager.

Issue 02 (2015-12-10)

This is the second official release. The updates are as follows:

  • Added the Reclaiming Space of a Storage System section.
  • Added the Connection Change Between the Storage System and an Application Server section.
  • Added the Configuration the Disk Encryption Services section.
  • Added the FAQ How to Query the Mapping Between Host Disks and LUNs When the UltraPath Software Is Not Installed?.

Issue 01 (2015-08-30)

This is the first official release.

Traducción
简体中文
Descargar
Updated: 2018-06-05

N.° del documento: EDOC1000084191

Vistas:16112

Descargas: 2088

Average rating:
This Document Applies to these Products
Documentos relacionados
Share
Anterior Siguiente