No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

Huawei Sx3 Series Switches Troubleshooting Guide

Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Intended Audience

This document provides guidance for maintaining the S series switches, covering FAQ, common maintenance commands and preventive inspection guide, typical troubleshooting guide, troubleshooting cases, configuration notes, and prewarning.

Maintenance personnel must have the following qualifications:

  • Be familiar with the current network topology and NE version information.
  • Have equipment maintenance experience and be familiar with equipment maintenance methods .

Applicable Versions

This document is applicable to V200R008 and earlier versions of the S series switches.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Command Conventions

The command conventions that may be found in this document are defined as follows.

Convention

Description

Boldface

The keywords of a command line are in boldface.

Italic

Command arguments are in italics.

[ ]

Items (keywords or arguments) in brackets [ ] are optional.

{ x | y | ... }

Optional items are grouped in braces and separated by vertical bars. One item is selected.

[ x | y | ... ]

Optional items are grouped in brackets and separated by vertical bars. One item is selected or no item is selected.

{ x | y | ... } *

Optional items are grouped in braces and separated by vertical bars. A minimum of one item or a maximum of all items can be selected.

[ x | y | ... ] *

Optional items are grouped in brackets and separated by vertical bars. Several items or no item can be selected.

&<1-n>

The parameter before the & sign can be repeated 1 to n times.

#

A line starting with the # sign is comments.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue

Release Date

Description

07

2018-06-30

Seventh official release

06

2018-04-30

Sixth official release

05

2017-06-30

Fifth official release

04

2016-11-10

Fourth official release

03

2016-07-30

Third official release

02

2015-10-25

Second official release

01

2015-05-30

Initial official release

Traducción
Descargar
Updated: 2018-07-28

N.° del documento: EDOC1000091885

Vistas:69425

Descargas: 1064

Average rating:
This Document Applies to these Products
Documentos relacionados
Share
Anterior Siguiente