No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

CX318 Pass-Through Module V100R001 User Guide 06

Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About this document

About this document

Purpose

This document provides information on the features, installation, removal, and maintenance of the CX318 10 Gigabit Ethernet (GE) pass-through module of the E9000 server.

Intended Audience

This document is intended for:

  • Technical support personnel
  • Maintenance personnel

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol Conventions

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

06

2018-09-20

This issue is the sixth official release.

05

2018-04-17

This issue is the fifth official release.

04

2017-04-14

This issue is the fourth official release,and includes the following changes:

Added product model descriptions to Appearance.

03

2017-02-17

This issue is the third official release,and includes the following changes:

Added a Mezz1 networking diagram in Ports

02

2016-11-30

This issue is the second official release.

01

2016-04-20

This issue is the first official release.

Traducción
Descargar
Updated: 2018-09-20

N.° del documento: EDOC1000103895

Vistas:4276

Descargas: 192

Average rating:
This Document Applies to these Products
Documentos relacionados
Share
Anterior Siguiente