OceanStor 2200 V3&2600 V3 Storage System V300R005 Installation Guide 06

"This document describes hardware installation of the storage system, covering the followingparts: precautions and preparations, installation flow, cabling, installation check, power-on, andstatus indicator check."
Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Intended Audience

This document describes hardware installation of a storage system – precautions and preparations, installation procedure, cabling, installation check, power-on, and grounding.

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Conventions

As part of an effort to improve and enhance the product performance and capabilities, Huawei Technologies Co., Ltd. periodically releases revisions of the hardware and software. Therefore, some functions described in this document may not be supported by all versions of the software or hardware currently in use. For the most up-to-date information about product features, refer to the product release notes.

If a product does not function as described in this document, contact Huawei technical support.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes in earlier issues.

Issue 06 (2018-05-30)

This is the sixth official release.

Added the description about how to use the optical fiber binding tape.

Issue 05 (2018-02-05)

This is the fifth official release.

Optimized some description.

Issue 04 (2017-07-31)

This is the fourth official release.

Added the description of PDU in Connecting AC Power Cables.

Issue 03 (2017-03-30)

This is the third official release.

Added the Follow-up Procedure to (Optional) Checking and Setting the Working Mode of the SmartIO Interface Module.

Issue 02 (2016-09-30)

This is the second official release.

  • Added the Connecting two disk enclosures to the 2200 V3 (single controller) figure to Connecting Disk Enclosures.
  • Added Removing SAS Cables to Connecting Disk Enclosures.
  • Added Changing IP Addresses of Management Network Ports Using DeviceManager.

Issue 01 (2016-04-30)

This is the first official release.

Traducción
简体中文
Descargar
Updated: 2018-06-14

N.° del documento: EDOC1000106143

Vistas:4798

Descargas: 509

Average rating:
Documentos relacionados
Share
Anterior Siguiente