No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

KunLun Mission Critical Server V100R001 CMC Alarm Handling 08

This document describes KunLun 9016 and 9032 alarms in the CMC, in terms of their meanings, impact on the system, possible causes, and handling suggestions.
Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Purpose

This document describes alarms of KunLun mission critical servers in terms of the meaning, impact on the system, possible causes, and solutions.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices, and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Command Conventions

The following table defines the meanings of bladeN (Nis an integer from 1 to 8).

BladeN

Mapping

Description

Blade 1

SCE 1 - BPU B

Basic partition unit (BPU) B of system compute enclosure (SCE) 1

Blade 2

SCE 1 - BPU A

BPU A of SCE 1

Blade 3

SCE 2 - BPU B

BPU B of SCE 2

Blade 4

SCE 2 - BPU A

BPU A of SCE 2

Blade 5

SCE 3 - BPU B

BPU B of SCE 3 (available only for the KunLun 9032)

Blade 6

SCE 3 - BPU A

BPU A of SCE 3 (available only for the KunLun 9032)

Blade 7

SCE 4 - BPU B

BPU B of SCE 4 (available only for the KunLun 9032)

Blade 8

SCE 4 - BPU A

BPU A of SCE 4 (available only for the KunLun 9032)

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 08 (2018-09-25)

ALM-0x0100003F Failed to Read Memory Temperature is added.

Issue 07 (2018-03-20)

ALM-2300002F REE Power Failure and ALM-23000029 Failed to Obtain the ID of an I/O Module are added.

Issue 06 (2017-11-20)

REE alarms are added.

Issue 05 (2017-05-12)

ALM-28000003 CPLD Signal Cable Connection Exception is added.

Issue 04 (2017-02-21)

ALM-3700002B SSL Certificate Expiring and ALM-3700002D SSL Certificate Expired are added.

Issue 03 (2017-01-17)

ALM-1700003F CMC External Network Communication Failed is updated.

Issue 02 (2016-10-29)

All the alarms are updated.

Issue 01 (2016-01-25)

The issue is the first official release.

Traducción
Descargar
Updated: 2018-09-28

N.° del documento: EDOC1000111849

Vistas:17346

Descargas: 69

Average rating:
This Document Applies to these Products
Documentos relacionados
Share
Anterior Siguiente