No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

KunLun Mission Critical Server V100R001 Upgrade Guide 08

This document describes how to upgrade the CMC, BIOS, and LCD with CMC WebUI and verify upgrade results of the Rack Server.
Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Overview

This document describes how to upgrade the central management enclosures (CMEs), system SCEs (SCEs, REE supported), RAID controller cards, and NICs of KunLun 9008, 9016, and 9032 servers.

Intended Audience

This document is intended for operators who will perform the upgrade. The operators are assumed to have the following knowledge and skills:

  • Current networking and network element (NE) versions
  • Operation and maintenance of the devices

Symbol Conventions

The symbols that are found in this document are defined as follows:

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices, and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all changes made in previous issues.

Issue 08 (2018-09-25)

Updated the name of some software packages.

Issue 07 (2018-05-15)

Upgrade is updated.

Issue 06 (2018-03-30)

Upgrade is updated.

Issue 05 (2017-11-7)

The information about the REE upgrade is added, and the information about the LSI SAS3008 upgrade is deleted.

Issue 04 (2017-05-25)

The descriptions of upgrading the 24-HDD FIO and the 24-HDD hard disk backplane are added.

Issue 03 (2017-03-03)

5.2.2 Upgrade is updated.

Issue 02 (2016-10-29)

5.2.2 Upgrade is updated.

Issue 01 (2016-01-25)

This issue is the first official release

Traducción
Descargar
Updated: 2018-09-28

N.° del documento: EDOC1000115577

Vistas:4934

Descargas: 97

Average rating:
This Document Applies to these Products
Documentos relacionados
Share
Anterior Siguiente