No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

OceanStor 9000 V300R006C00 Software Installation Guide 09

Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Intended Audience

This document explains how to install software for the OceanStor 9000, including preparations, installation, verification, and exception handling.

This document is intended for:

  • Installation engineers
  • Technical support engineers
  • Operation and maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows:

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 09 (2018-10-30)

This issue is the ninth official release.

Issue 08 (2018-05-30)

This issue is the eighth official release.

Issue 07 (2017-11-30)

This issue is the seventh official release.

Issue 06 (2017-10-30)

This issue is the sixth official release. Updated Building an Installation Environment.

Issue 05 (2017-09-30)

This issue is the fifth official release. Updated Reinstalling the Production Mirroring Software for the C72.

Issue 04 (2017-08-18)

This issue is the fourth official release. Updated the SNMP configuration command.

Issue 03 (2017-06-09)

This issue is the third official release. Described the two-management switch networking in Configuring Switches on a 10GE Network , listed two new tasks in the table under the follow-up procedure in Installing Storage Cluster Software, and provided precautions about BIOS operations in Configuring an IP Address for the Mgmt Port on a P12E/P25E/P36E/C36E and Configuring an IP Address for the Mgmt Port on a P12E/P25E/P36E/C36E.

Issue 02 (2017-01-26)

This issue is the second official release. Updated the description about the switch models and configuration file and added the section of copying switch DCB commands in appendix D.

Issue 01 (2016-09-30)

This issue is the first official release.

Traducción
Descargar
Updated: 2018-10-27

N.° del documento: EDOC1000122531

Vistas:7278

Descargas: 122

Average rating:
This Document Applies to these Products
Documentos relacionados
Share
Anterior Siguiente