No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

Asistencia Centro de documentación

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Purpose

Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 07 (2018-07-30)

This is the seventh official release. The updates are as follows:

Added commands:
  • show ldap_server general
  • change ldap_server
  • show rsf upgrade_check_info
  • export file_system_tier_info
  • swap dr_star_member remote_replication
  • show nfs nfsv41_session_forechannel
  • change nfs nfsv41_session_forechannel
  • change disk_domain disk_log
  • show disk_domain disk_log
  • change lun_takeover enhance_switch
  • show nas_mem slot_info
  • show upgrade port_failover_switch
  • change upgrade port_failover_switch
  • add snapshot_group snapshot
  • remove snapshot_group snapshot
  • show takeover_switch global_enhanced_masquerading_switch
  • show nfs nfsv41_stat
  • clear nfs nfsv41_stat
  • rst_svc_ctl.sh
  • show nfs nfsv41_err_stat
  • show disk_domain set_disk_group
  • change takeover_switch global_enhanced_masquerading_switch
  • show nas_log function_debug_info
  • change nas_log function_debug_info
  • proto nas_vfs show_file_by_path
  • change nfs nfsv4_idmap_numerical
  • show nfs nfsv4_idmap_numerical
  • change tgt_switch vxvm_dmp_feature
  • memstat.sh
  • show tgt_switch vxvm_dmp_feature
  • change hyper_metro_consistency_group general*
  • change hyper_metro_pair general*
  • show client top
  • show file top
  • show file_system top
  • show disk_group
  • change remote_replication startup
  • change consistency_group startup
  • scsi showvaaistat
  • scsi showreportlun
  • ntpq
  • rephc showtntstatus
  • rephc queryarrayinfo
  • rephc queryisoinfo
  • rephc showalltntpairlock
  • rephc shownastaskinfo
  • change nfs nfsv41_session_trunking_support
  • show nfs nfsv41_session_trunking_support
Modified commands:
  • delete quorum_server_link db
  • pal rescue showtaskinfo
  • change disk_domain format_parallel
  • quota show volhang
  • delete configuration_log
  • delete quorum_server db
  • quota show poolhang
  • change fdsa switch
  • eam alarm
  • delete clone_db
  • delete clone_dcl
  • delete clone_rsstype
  • upgradesystem
  • show dedup_compress_lun general
  • Qos show vol_poss
  • show cache_partition ratio
  • show disk_domain format_mode
  • change disk_domain format_mode
  • qos show io_class_timerecord
  • ckgiof showincon
  • ckgiof ckgtrans
  • ms showdisk
  • kvdb calcucrc
  • nmgr showinst
  • spa extlist
  • spa crccheck
  • import oem_package
  • qos show io_class_schdinfo
  • Qos show io_class_param
  • change storage_pool repair_lun
  • bgr showcounter
  • change logical_port failover_switch
  • sysforcepoweron
  • change cluster controllers
  • test logical_port failover
  • change fdsa check_item_switch
  • change logical_port failover
  • change cache_partition write_policy
  • upgrade_clearflag.sh
  • eam showevent
  • change iod schedule_information
  • show nfs nfsv4_opened_files
  • create upgrade session
  • change hyper_metro_pair cfg_switch
  • show ddp domain_info
  • show hyper_metro_pair cfg_switch
  • arb showall
  • arb showtrace
  • change cache_partition ratio
  • change cifs keep_alive_switch
  • change cifs keep_idle
  • change cifs log_level
  • change cifs reserve_bit
  • change cifs rtt_switch
  • change cifs smb3_switch
  • change file_system amend
  • change file_system check
  • change file_system force_expand
  • change file_system min_fs
  • change file_system vstore
  • change fs_clone split_concurrent_num
  • change fs_clone split_concurrent_size
  • change fs_clone split_force
  • change fs_snapshot check_strategy
  • change remote_replication cfg_switch
  • change service ndmp_delete_snapshot
  • change space check_space_consistency
  • change space rescue_config
  • change statistics_switch ftp
  • change system external_tlv_channel
  • clear cifs connection
  • clear cifs fp_record
  • clear cifs server_stat
  • clear cifs smb1_stat
  • clear cifs smb2_stat
  • clear fs_snapshot residual_clone_ref
  • clear performance ndmp
  • clear pim stat
  • delete file_system force
  • delete file_system scrub_error_info
  • delete hyper_metro_pair dump
  • disklog repairio
  • disklog showobj
  • export file_system dirtydata
  • mr showblkmgr
  • mr showckgmgr
  • mr showfilestatus
  • mr showflowcnt
  • mr showloginfo
  • mr showstatus
  • mr showtreehandle
  • mrm showcounter
  • mrr repairextentcountshow
  • mrr showflow
  • mrr showrpoolaction
  • ms showscan
  • ms showtask
  • show antivirus mempool
  • show antivirus scan
  • show cifs connection
  • show cifs fp_record
  • show cifs reserve_bit
  • show cifs rtt_switch
  • show cifs server_info
  • show cifs server_stat
  • show cifs smb2_stat
  • show cifs smb3_switch
  • show dha judgeboundary
  • show dha judgeproportion
  • show dha modelswitch
  • show disk slowthreshold
  • show disk_reliability_policy slow_disk_detect
  • show file_system check
  • show file_system dirtydata
  • show file_system min_fs
  • show file_system rescue
  • show file_system scrub
  • show file_system scrub_error_info
  • show fs_clone split
  • show fs_clone split_concurrent_num
  • show fs_clone split_concurrent_size
  • show fs_snap_control action
  • show fs_snap_control all_task_info
  • show fs_snap_control code
  • show fs_snap_control last_task_id
  • show fs_snap_control status
  • show fs_snap_control task
  • show fs_snapshot resource
  • show hypervault_backup general
  • show hypervault_event general
  • show hypervault_restore general
  • show nfs server_info
  • show performance ndmp
  • show pim stat
  • show protocol debug
  • show remote_replication cfg_switch
  • show space check_space_consistency
  • show space dmn_info
  • show space statistic_info
  • show statistic nfs_connection
  • show statistics ftp_connection
  • show statistics ftp_connection_count
  • show statistics_switch ftp
  • show system external_tlv_channel
  • sio show slowthresh
  • spa showqueueinfo
  • ss showtask
  • ssdc show bg
  • ssdc show copyspeed
  • ssdc show copystate
  • ssdc show mem
  • ssdc show objDelBlkDetail
  • ssdc show pt
  • ssdc show ssd
  • ssdc show st basic
  • ssdc show volCachedDataInfo
  • show logical_port failover_switch
  • delete fs_private_snapshot force
  • pair showcounter
  • change disk slowthreshold
  • change dha singlemodelconfig
  • change disk ak_auth_recover
  • change file_system switch
  • show file_system switch
  • change port enabled
  • show system configuration_log
  • remove system management_ip
  • remove system maintenance_ip
  • change ddp limit_time
  • os_change_bayconfig.sh
  • show service ndmp_connection
  • show statistic ndmp_connection
  • change file_system scrub
  • change space global_config
  • show space global_config
  • change cifs share_cache
  • clear cifs share_cache
  • ccdb.sh
  • change cache destage_concurrent
  • show ftp stat
  • show ndmp stat
  • sshtoremoteExt
  • change disk_domain verify_pool_meta
  • show disk_domain verify_pool_meta
  • overload_ctrl show flowctrl_info
  • Qos show io_class_detail
  • help
  • ssdc show obj
  • sys showlockhandle
  • change logical_port failback
  • show smartqos_policy switch
  • change smartqos_policy function_enabled
  • change smartqos_policy switch
  • show smartqos_policy delay
  • show ldap_server general
  • change ldap_server
  • show rsf upgrade_check_info
  • export file_system_tier_info
  • swap dr_star_member remote_replication
  • show nfs nfsv41_session_forechannel
  • change nfs nfsv41_session_forechannel
  • change disk_domain disk_log
  • show disk_domain disk_log
  • change lun_takeover enhance_switch
  • change upgrade port_failover_switch
  • add snapshot_group snapshot
  • remove snapshot_group snapshot
  • show takeover_switch global_enhanced_masquerading_switch
  • rst_svc_ctl.sh
  • change nas_log function_debug_info
  • show fs_snapshot clone_ref
  • show cifs smb1_stat
  • change tgt_switch vxvm_dmp_feature
  • memstat.sh
  • change hyper_metro_consistency_group general*
  • change hyper_metro_pair general*
  • show disk_group
  • change file_system rescue

Issue 06 (2018-05-09)

This is the sixth official release. The updates are as follows:

Added commands:
  • poweroffenclosure
  • perf.sh
  • changelogical_portfailover_switch
  • changelogical_portfailback
  • rst_svc_ctl.sh
  • changehyper_metro_vstore_pairfull_sync_cfg
  • changehyper_metro_pairfull_sync_cfg
  • changehyper_metromost_domain_enabled
  • showhyper_metromost_domain_enabled
  • removehyper_metro_consistency_groupmember
  • deletehyper_metro_domaindb
  • deletehyper_metro_pairdb
  • deletehyper_metro_pairdcl
  • deletehyper_metro_pairdump
  • deletehyper_metro_pairlog
  • deletehyper_metro_pairrsstype
  • showhyper_metro_consistency_groupconfig
  • clearhyper_metro_consistency_groupdb
  • deletehyper_metro_vstore_pairdb
  • deletehyper_metro_vstore_pairrss
  • changehyper_metro_consistency_grouplink_status
  • changehyper_metro_pairlink_status
  • changehyper_metro_vstore_pairlink_status
  • changehyper_metro_pairgeneral*
  • changehyper_metro_consistency_groupgeneral*
  • changelun_takeoverenhance_switch
  • showupgradeport_failover_switch
  • changeupgradeport_failover_switch
  • showhyper_metro_vstore_paircfg_switch
  • showhyper_metro_paircfg_switch
  • changehyper_metro_paircfg_switch
  • changehyper_metro_vstore_paircfg_switch
  • showhyper_metro_vstore_pairremaincfglog
  • xnetpalsetnapisch
Modified commands:
  • changedisk_domainverify_pool_meta
  • showdisk_domainverify_pool_meta
  • changelun_cacheforce_destage
  • changeomnilockopen
  • changeodxodx_enabled
  • cliget-dbbuinfo
  • cliget-dledinfo
  • changeverify_stripeconfig
  • cpyuserinfo
  • deletequorum_server_linkdb
  • dclcounter
  • eplshowerrorio
  • grainshowAllocAlg
  • restorehotpatch
  • changedisk_domainformat_parallel
  • changeftdslocation
  • Qosshowio_class_detail
  • showdlmresource_master
  • changesmartqos_policyfunction_enabled
  • deletequorum_serverdb
  • devlunshowverifystripeinfo
  • maint_debug_cli
  • showcacheglobal
  • spacetxshow
  • showcacheblocked_page
  • showpairlog_ctrl
  • volumeshowverifystripeinfo
  • volumeshowrescallstats
  • showsmartqos_policyswitch
  • showsystemforce_write_back
  • showsmartqos_policydelay
  • showsystemcommand_list
  • eplshowevent
  • eplshowldev
  • pairshowqueueinfo
  • eplshowdbarray
  • deletesnapshot_rsstype
  • deleteclone_db
  • deleteclone_dcl
  • deleteclone_rsstype
  • deletelun_migration_rsstype
  • deletelun_migration_dcl
  • deletelun_migration_db
  • changeiscsidiscover_multiport
  • showpairinit_accessor
  • help
  • xrbshowintermem
  • showdlmresource_proxy
  • changenfsnfsv3_readdir_buf
  • changenfsnfsv4_readdir_buf
  • showdisk_domainformat_mode
  • changedisk_domainformat_mode
  • scsishowreservationlun
  • changeccdbgeneral
  • cgroup_manage.sh
  • setupsystem
  • cmm.sh
  • ckgiofshowincon
  • ckgiofckgtrans
  • msshowdisk
  • kvdbcalcucrc
  • nmgrshowinst
  • spaextlist
  • spacrccheck
  • os_upgrade_hotpatch.sh
  • changesmartqos_policyswitch
  • changesystemmaintenance_ip
  • overload_ctrlshowflowctrl_info
  • changestorage_poolrepair_lun
  • changeremote_replicationclear_difference
  • rmshowmetaio
  • drvunfshowiniioprofile
  • changeverify_stripeenabled
  • changelogical_portfailover_switch
  • drvunfshowdetail
  • showsystem_diskupgrade_status
  • testlogical_portfailover
  • changefdsacheck_item_switch
  • grainshowAllocTree
  • spcshowstatistic
  • changelogical_portfailover
  • changelogical_portfailback
  • changenfsnfsv3_forward_switch
  • shownfsnfsv3_forward_switch
  • shownfsnfsv4_opened_files
  • devlunshowstepcount
  • createupgradesession
  • sysshowgpoollock
  • false
  • erase
  • hiddr_test
  • changehyper_metro_paircfg_switch
  • changehyper_metro_vstore_paircfg_switch
  • showddpchunk_info
  • showddpchunk_meta
  • showddpio_counter
  • showddpmem_info
  • showddpmeta_list
  • showddpratio
  • showhyper_metro_paircfg_switch
  • showhyper_metro_vstore_paircfg_switch
  • showhyper_metro_vstore_pairremaincfglog
  • arbshowall
  • arbshowtrace
  • cacheshowforcemirror
  • cacheshowprefetch
  • changecifskeep_alive_switch
  • changecifskeep_idle
  • changecifslog_level
  • changecifsreserve_bit
  • changecifsrtt_switch
  • changecifssmb3_switch
  • changecontrollerdma_type
  • changecpufrequency
  • changededup_lunscrub
  • changefile_systemamend
  • changefile_systemcheck
  • changefile_systemforce_expand
  • changefile_systemisolate_object
  • changefile_systemmin_fs
  • changefile_systemrepair
  • changefile_systemvstore
  • changefsaopen_lock
  • changefsastat_switch
  • changenas_logdebug_switch
  • changenas_memhealth_limit
  • changenfsnfsv3_readdirplus_support
  • changenfsnfsv4_idmap_support
  • changenfsrecv_buf
  • changenfsrtt_switch
  • changenfssend_buf
  • changenfsstat_switch
  • changeomnilockopen
  • changeomnilockrtt_switch
  • changepalasync_delete
  • changepalclear_trunc_xattr
  • changepalrtt
  • changeremote_replicationfull_sync_cfg
  • changeremote_replication_vstorefull_sync_cfg
  • changeremote_replication_vstorelink_status
  • changeservicendmp_delete_snapshot
  • changeshake_alarmgeneral
  • changespacecheck_space_consistency
  • changespaceconfig
  • changespacegrain
  • changespacegrain_extent_tree
  • changespacegrain_merge_tree
  • changespacerescue_config
  • changespaceflowgeneral
  • changespacetxtimer
  • changespcrtt_switch
  • changestatistics_switchftp
  • changestorage_poolrepair_dedup_lun
  • changesystemexternal_tlv_channel
  • clearcifsconnection
  • clearcifsfp_record
  • clearcifsserver_stat
  • clearcifssmb1_stat
  • clearcifssmb2_stat
  • clearfsaoperation_timeout
  • clearfsarequest_stat
  • clearnfsconnection
  • clearnfsnfsv3_lock
  • clearnfsnfsv3_lock_db
  • clearnfsnfsv3_nlm_stats
  • clearnfsnfsv3_stat
  • clearnfsnfsv4_dbuffer
  • clearnfsnfsv4_idmap_cache
  • clearnfsnfsv4_stat
  • clearnfsserver_stat
  • clearnfsshare_cache
  • clearomnilockbrl
  • clearomnilocklock_client_stat
  • clearomnilockopen
  • clearperformancendmp
  • clearpimstat
  • deletededup_lunscrub_error_info
  • deletefile_systemforce
  • deletefile_systemscrub_error_info
  • deletehypervaultdcl
  • deletehypervaultrss_type
  • deletehypervaultservice_db
  • deletehypervault_dbgeneral
  • deleteomnilockopen
  • deleteremote_replication_vstoredb
  • deleteremote_replication_vstorerss
  • deletespacegrain_extent_tree
  • disklogrepairio
  • disklogshowobj
  • drvsascbbgetroutelist
  • drvsascbbreadreg
  • epllinkq
  • eplversionservice
  • exportfile_systemdirtydata
  • mrshowblkmgr
  • mrshowckgmgr
  • mrshowfilestatus
  • mrshowflowcnt
  • mrshowloginfo
  • mrshowstatus
  • mrshowtreehandle
  • mrmshowcounter
  • mrrrepairextentcountshow
  • mrrshowflow
  • mrrshowrpoolaction
  • msshowscan
  • msshowtask
  • palctrlminloadinfo
  • repshowlastfailtrace
  • rephcquerypair
  • rephcshowAllCgLockInfo
  • rephcshowAllPairLockInfo
  • rephcshowCgLockInfo
  • rephcshowluntopair
  • rephcshowPairLockInfo
  • rephvlockshow
  • rephvlogzoneshow
  • rephvmutexshow
  • rephvnegoshow
  • rephvpolicyshow
  • rephvvaultshow
  • scsishowtpgstatus-llunID
  • showantivirusmempool
  • showantivirusscan
  • showcifsconnection
  • showcifsfp_record
  • showcifsreserve_bit
  • showcifsrtt_switch
  • showcifsserver_info
  • showcifsserver_stat
  • showcifssmb1_stat
  • showcifssmb2_stat
  • showcifssmb3_switch
  • showcontrollerdma_type
  • showdedup_lunscrub
  • showdedup_lunscrub_error_info
  • showdiskslowthreshold
  • showdisk_reliability_policyslow_disk_detect
  • showfile_systemcheck
  • showfile_systemdirtydata
  • showfile_systemisolate_object
  • showfile_systemmin_fs
  • showfile_systemoptimization
  • showfile_systemrepair
  • showfile_systemrescue
  • showfile_systemscrub
  • showfile_systemscrub_error_info
  • showfs_snap_controlstatus
  • showfsaopen_lock
  • showfsaoperation_timeout
  • showfsarequest_stat
  • showfsastat_switch
  • showhypervault_backupgeneral
  • showhypervault_eventgeneral
  • showhypervault_restoregeneral
  • shownas_logdebug_switch
  • shownas_memhealth_limit
  • shownfsconnection
  • shownfsnfsv3_err_stat
  • shownfsnfsv3_lock_db
  • shownfsnfsv3_nlm_stats
  • shownfsnfsv3_nlm_svc_info
  • shownfsnfsv3_readdirplus_support
  • shownfsnfsv3_stat
  • shownfsnfsv4_dbuffer
  • shownfsnfsv4_err_stat
  • shownfsnfsv4_idmap_support
  • shownfsnfsv4_stat
  • shownfsreaddir_buf
  • shownfsrtt_switch
  • shownfsserver_info
  • shownfsserver_stat
  • shownfsstat_switch
  • shownfswork_queue_info
  • showomnilockbrl
  • showomnilockbrl_lock_info
  • showomnilockfile
  • showomnilocklock_client_info
  • showomnilocklock_client_stat
  • showomnilocklock_server_info
  • showomnilocklock_server_stat
  • showomnilockopen
  • showomnilockopen_lock_wait_info
  • showomnilockrtt_switch
  • showpalasync_delete
  • showpalasync_delete_apo
  • showpalasync_delete_info
  • showpalattribute
  • showpalclear_trunc_xattr
  • showpalcontrol_flow
  • showpalcontrol_info
  • showpalcontrol_trace
  • showpalcounter
  • showpaldentry
  • showpaldentry_info
  • showpaldirectory
  • showpalevent_record
  • showpalextra_attribute
  • showpalextra_attribute_list
  • showpalfai
  • showpalfile_handle
  • showpalfile_system_event
  • showpalfile_system_perfomance
  • showpalfile_system_service_stat
  • showpalforward_info
  • showpallink_table
  • showpalmaster_node
  • showpalmemory
  • showpalnotify_entry
  • showpalnotify_memory
  • showpalpath
  • showpalrtt
  • showpalsnap_fai
  • showpaltruncate_info
  • showpalvaai_io_counter
  • showpalvaai_list
  • showpalvaai_property
  • showpalvaai_task
  • showpalvaai_task_info
  • showpalvnode_attribute
  • showpalworm_file_attribute
  • showperformancendmp
  • showpimstat
  • showprotocoldebug
  • showralcounter
  • showrdcldataset
  • showrelcounter
  • showrelmemory
  • showrelstatus
  • showreltask
  • showremote_replication_vstorecfg_switch
  • showremote_replication_vstoreconfiguration
  • showspaceabnormal_file_system_info
  • showspaceapo_entry_info
  • showspaceapo_info
  • showspacecheck_space_consistency
  • showspacedmn_info
  • showspaceflow_control
  • showspaceflow_io
  • showspacegrain
  • showspacegrain_alloc
  • showspacegrain_defree
  • showspacegrain_dynamic
  • showspacegrain_extent_count
  • showspacegrain_extent_queue
  • showspacegrain_extent_tree
  • showspacegrain_extent_tree_status
  • showspacegrain_io
  • showspaceobject_bonus
  • showspaceobject_config
  • showspaceobject_mem
  • showspaceobject_set_info
  • showspacesio
  • showspacestage_info
  • showspacestatistic_info
  • showspacetask_flow_info
  • showspacetransaction
  • showspaceuberblock
  • showstatisticnfs_connection
  • showstatisticsftp_connection
  • showstatisticsftp_connection_count
  • showstatistics_switchftp
  • sioshowslowthresh
  • spashowqueueinfo
  • space.sh
  • ssshowtask
  • ssdcshowobj
  • sysshowdblock
  • sysshowlockhandle
  • sysshowmem
  • sysshowzoneinfo
  • txmgr
  • volsshowcmdcnt
  • showlogical_portfailover_switch
  • changeremote_replication_vstorecfg_switch
  • shownfsnfsv3_forward_stat
  • clearnfsnfsv3_forward_stat
  • eamaddmgrethip
  • changediskslowthreshold
  • changedhasinglemodelconfig
  • changenfsage_time
  • shownfsage_time
  • changefile_systemswitch
  • showfile_systemswitch
  • changeportenabled
  • showad_processstatus
  • sys.sh
  • showservicendmp_connection
  • showstatisticndmp_connection
  • changefile_systemscrub
  • changefile_systemoptimization
  • changefile_systemrescue
  • changespaceglobal_config
  • showspaceglobal_config
  • changecifsshare_cache
  • clearcifsshare_cache
  • ccdb.sh
  • devlunshowctrl
  • showspace_taskgeneral
  • showhttpstat
  • showftpstat
  • showndmpstat
  • sshtoremoteExt
  • poweroffenclosure
  • rst_svc_ctl.sh
  • deletehyper_metro_pairdump
  • changehyper_metro_pairgeneral*
  • changehyper_metro_consistency_groupgeneral*
  • changelun_takeoverenhance_switch

Issue 05 (2018-01-30)

This is the fifth official release. The updates are as follows:

Added commands:
  • show performance smart_cache_partition
  • add failover_group fc_port
  • remove failover_group fc_port
  • show failover_group fc_port
  • change service ndmp_scanbus
  • show assistant_cooling_unit
  • export event
  • change system kernel_security_patch
  • show system kernel_security_patch
Modified commands:
  • change smtp_server config
  • show performance restore
  • change snmp version
  • show event_restore
  • show diagnose_code
  • change system write_through_policy
  • show notification trap
  • create ib_initiator general
  • change ib_initiator general
  • change initiator
  • change performance restore
  • show host reachable
  • create initiator iscsi
  • change snmp usm
  • show kmc general
  • export kms key
  • change snmp safe_strategy
  • change vstore info
  • delete vstore general
  • create vstore general
  • show persistent_mirror silence_time
  • change persistent_mirror silence_time
  • show notification syslog
  • import ssl_certificate
  • test call_home service
  • show port general
  • change service ftp
  • change hyper_metro_pair general
  • change hyper_metro_consistency_group general
  • change ntp_server config
  • change system ntp
  • add failover_group bond_port
  • add failover_group eth_port
  • add failover_group vlan_port
  • change disk erase
  • change event_restore enabled
  • change lun_copy session
  • change user_session number
  • create failover_group general
  • create hyper_metro_consistency_group general
  • create initiator fc
  • delete failover_group general
  • import ssh_host_key_file
  • remove failover_group bond_port
  • remove failover_group eth_port
  • remove failover_group vlan_port
  • show event_config
  • show performance file
  • show performance statistic_enabled
  • show performance strategy
  • show snmp context_name
  • show system general
  • show upgrade package
  • change snmp community
  • delete virtual_machine general
  • export running_data
  • show file export_path
  • show file package_result
  • delete file
  • show file notification
  • export performance file
  • export cli history
  • change event_config
  • change notification email_extend
  • change performance strategy
  • add failover_group fc_port
  • change system kernel_security_patch
  • show system kernel_security_patch

Issue 04 (2017-11-30)

This is the fourth official release. The updates are as follows:

Added commands:
  • change remote_support general
  • show remote_support technical_support_center
  • change call_home authenticate
  • test call_home service
  • show remote_support general
  • clear remote_support proxy_user_password
  • change call_home general
  • show call_home general
  • change service ndmp_restart_service
  • change ntp_server config
  • change system ntp
  • show ntp_server general
  • show system ntp
  • test ntp_server general
  • change notification trap
  • change iostat policy
Modified commands:
  • delete failover_group general
  • remove failover_group bond_port
  • remove failover_group eth_port
  • remove failover_group vlan_port
  • show file_system file_handle
  • show antivirus statistic
  • delete antivirus statistic
  • add cache_partition lun
  • add failover_group bond_port
  • add failover_group eth_port
  • add failover_group vlan_port
  • add hyper_metro_domain quorum_server
  • change disk_domain general
  • change hyper_metro_pair priority
  • change cache_partition general
  • change disk precopy
  • change enclosure light
  • change failover_group general
  • change mm_user synchronize
  • add smartqos_policy file_system
  • change performance statistic_enabled
  • change storage_pool reconstruction_speed
  • change system name
  • create cache_partition
  • delete ldap configuration
  • create mirror_lun
  • delete hyper_metro_vstore_pair general
  • delete iscsi target
  • delete mirror_lun
  • create failover_group general
  • create hyper_metro_domain general
  • delete quorum_server general
  • delete smartqos_template
  • delete vlan general
  • add cache_partition file_system
  • change lun_migration
  • change mm_user user_name
  • change performance strategy
  • remove mirror_lun mirror_copy
  • remove quorum_server_link general
  • show cache_partition lun
  • show disk_domain available_capacity
  • show notification email_extend
  • show notification receiver
  • change snmp community
  • change system location
  • create clone
  • create vlan general
  • delete cache_partition
  • delete hyper_metro_domain general
  • delete role general
  • export logfile
  • remove hyper_metro_domain quorum_server
  • show disk precopy
  • show disk_domain lun
  • show lun_migration count
  • show performance bond_port
  • show performance remote_replication
  • show smartqos_policy file_system
  • show smartqos_template
  • show snmp safe_strategy
  • show upgrade package
  • remove smartqos_policy file_system
  • show bbu life
  • show cache_partition file_system
  • show isns server_ip
  • show ldap configuration
  • show mm_user general
  • show performance controller
  • show performance lun
  • show system manufactory
  • show disk bad_sector_record
  • show disk in_domain
  • show iostat policy
  • show performance system
  • show ssd routeswitch
  • show storage_pool reconstruction_speed
  • show storage_pool tier
  • show system server_port
  • show performance port
  • show remote_vstore general
  • show server_info
  • show server_ip
  • show disk_domain securevideo
  • show tls_cert
  • show white_list
  • show cli configuration
  • change protocol service
  • change notification sms
  • show performance logical_port
  • change user_mode current_mode
  • show alarm_mask
  • show alarm_object
  • show host_group host
  • change schedule
  • change snapshot cancel_restore
  • change service ndmp_scanbus
  • delete schedule
  • show host snapshot
  • show lun_group snapshot
  • show notification sms
  • show snapshot available_lun
  • add mapping_view host_group
  • add mapping_view port_group
  • remove mapping_view port_group
  • remove mapping_view lun_group
  • change system client_name
  • show mapping_view host_group
  • show lun_group general
  • show mapping_view lun_group
  • show port_group mapping_view
  • show lun_group mapping_view
  • show host_group mapping_view
  • show port_group general
  • show port initiator
  • show port_group port
  • show mapping_view port_group
  • show vlan general
  • show vlan count
  • add port_group port
  • change host_group general
  • remove mapping_view host_group
  • show controller io
  • show host host_group
  • show lun lun_group
  • show lun_group lun
  • show snapshot lun_group
  • show notification email
  • show performance statistic_enabled
  • show performance strategy
  • delete file
  • change ssd routeswitch
  • show service cifs_config
  • show system write_through_policy
  • show license
  • show license_active
  • show lun_copy member
  • change clone general
  • show lun_copy general
  • show lun mapping_view
  • show snmp usm
  • show snmp context_name
  • create port_group
  • show host lun
  • show snmp port
  • show system permission_hardening
  • add remote_device link fc
  • export event
  • export performance file
  • show performance nfsv3
  • show performance nfsv4
  • show performance nfs_share
  • delete logical_port general
  • remove logical_port ipv4_route
  • remove logical_port ipv6_route
  • add logical_port ipv6_route
  • add logical_port ipv4_route
  • change logical_port failover_group
  • change alarm clear
  • change event_config
  • change event_restore enabled
  • show performance file_system
  • show notification syslog
  • show system media_scan
  • change system media_scan
  • remove role permit
  • add virtual_machine block
  • add virtual_machine port
  • add virtual_machine vmtools
  • change vm_file transference
  • create vm_template general
  • change virtual_machine failback_switch
  • delete vm_template general
  • delete vmtools general
  • pause virtual_machine
  • reboot virtual_machine
  • remove virtual_machine vm_iso
  • add virtual_machine vm_iso
  • poweroff virtual_machine
  • remove virtual_machine block
  • delete virtual_machine general
  • delete vm_iso general
  • remove virtual_machine port
  • show virtual_machine vcpu_isolate_switch
  • remove virtual_machine vmtools
  • show vhba general
  • show virtual_machine block
  • show vm_file transference_status
  • show vm_template general
  • resume virtual_machine
  • scan virtual_machine block
  • show virtual_machine failback_switch
  • show vm_file transference_path
  • show vmtools general
  • show vm_container general
  • show vm_fs general
  • show virtual_machine general
  • show vm_iso general
  • upgrade virtual_machine vmtools
  • create virtual_machine failback_session
  • create virtual_machine general
  • change virtual_machine general
  • add virtual_machine secondary_port
  • poweron virtual_machine
  • show vm_service general
  • show service ndmp_tape
  • change mm_user password
  • add role permit
  • change system permission_hardening
  • change system server_port
  • change hyper_metro_vstore_pair start
  • change role general
  • show service nfs_config
  • show file package_result
  • show file notification
  • change ssl_certificate passphrase
  • show system timezone
  • change audit_strategy
  • show clone secondary_lun
  • show disk format
  • show event_config
  • show quorum_server_link general
  • show smartqos_policy lun
  • show virtual_machine port
  • add disk_domain disk
  • delete hyper_metro_consistency_group
  • add hyper_metro_consistency_group pair
  • change hyper_metro_consistency_group synchronize
  • change hyper_metro_consistency_group priority
  • change hyper_metro_consistency_group pause
  • change hyper_metro_consistency_group start
  • remove hyper_metro_consistency_group pair
  • create hyper_metro_consistency_group verification_session
  • show performance file
  • show audit_strategy
  • create initiator fc
  • change host
  • show file export_path
  • change disk erase
  • show system general
  • add smart_cache_pool disk
  • create smart_cache_partition
  • delete smart_cache_partition
  • remove smart_cache_partition file_system
  • remove smart_cache_partition lun
  • show smart_cache_partition file_system
  • show smart_cache_partition lun
  • show smart_cache_partition general
  • show smart_cache_pool disk
  • show smart_cache_pool general
  • add smart_cache_partition file_system
  • add smart_cache_partition lun
  • change smart_cache_partition general
  • change storage_pool analysis
  • change storage_pool relocation_speed
  • create schedule relocate
  • create schedule monitor
  • change storage_pool relocation_schedule
  • change storage_pool ssd_enabled
  • show storage_pool ssd_enabled
  • show storage_pool analysis_configuration
  • show storage_pool relocation_speed
  • show storage_pool analysis_result
  • show performance smb2
  • show performance smb1
  • show performance cifs_share
  • create audit log
  • change user_session number
  • change hyper_metro_consistency_group general
  • create hyper_metro_consistency_group general
  • show performance cache_partition
  • show performance cifs_service
  • show performance nfs_service
  • change user_ssh_auth_info general
  • remove lun_takeover general
  • show lun_takeover general
  • change clone secondary_lun
  • remove lun_group lun
  • remove port ipv4_address
  • remove port ipv6_address
  • change system secure_compliance_clock
  • change notification email
  • delete audit log_files
  • create host
  • create ldap configuration
  • delete disk_domain
  • change disk_domain rekey
  • create disk_domain
  • change ldap configuration
  • change lun_copy session
  • remove smart_cache_pool disk
  • change antivirus pre_shared_key
  • change antivirus config
  • show antivirus config
  • export configuration_data
  • change hyper_metro_domain general
  • restore ssl_certificate
  • create hyper_metro_vstore_pair general
  • show common_config nfs
  • change common_config nfs
  • delete share_permission ftp
  • show share_permission ftp
  • change share_permission ftp
  • change service cifs_config
  • change common_config cifs
  • show common_config cifs
  • create share_permission ftp
  • show share_permission ftp_count
  • create storage_pool
  • create fs_clone general
  • show fs_clone general
  • create ldap authconfig
  • add notification trap
  • change notification trap
  • change notification email_extend
  • import ssh_host_key_file
  • change fs_clone split
  • show hyper_metro_vstore_pair check_session
  • change service nfs_config
  • create quorum_server general
  • create role general
  • change user_password
  • change consistency_group synchronize
  • show remote_replication general
  • create remote_replication general
  • swap hyper_metro_vstore_pair worksite
  • show security_rule
  • change hyper_metro_vstore_pair general
  • poweron interface_module
  • change port eth
  • show port route
  • show bbu general
  • change icmp switch
  • change performance threshold
  • show user_session number
  • show upgrade redundant_link
  • change notification syslog
  • show hyper_metro_vstore_pair general
  • show logical_port route
  • change vlan general
  • change service http
  • show service http
  • export running_data
  • show user_ssh_auth_info general
  • show system config_model
  • export cli history
  • show cli history
  • show system secure_compliance_clock
  • show disk health
  • change remote_replication_vstore local_vstore_port_status
  • change call_home authenticate
  • show remote_support general
  • change call_home general
  • add quorum_server_link general
  • change service ftp
  • show service ftp
  • create lun_takeover general
  • show disk_domain available_capacity
  • add mapping_view port_group
  • change call_home authenticate
  • change call_home general
  • change disk_domain rekey
  • delete role general
  • show file package_result
  • show file notification
  • delete file
  • change service http
  • show service ftp
  • create lun_takeover general
  • show disk_domain available_capacity
  • add virtual_machine vmtools
  • create virtual_machine general
  • change virtual_machine general
  • show service cifs_config
  • change service cifs_config
  • show lun_takeover general
  • show ntp_server general
  • create disk_domain
  • create smart_cache_partition
  • change smart_cache_partition general
  • show performance system
  • export event
  • change notification email
  • delete file
  • show file notification
  • change event_config
  • change hyper_metro_vstore_pair general
  • change hyper_metro_vstore_pair start
  • change performance strategy
  • change remote_replication_vstore local_vstore_port_status
  • create hyper_metro_vstore_pair general
  • delete hyper_metro_vstore_pair general
  • export performance file
  • show hyper_metro_vstore_pair check_session
  • show hyper_metro_vstore_pair general
  • swap hyper_metro_vstore_pair worksite
  • show file export_path
  • show file package_result
  • show file notification
  • delete file
  • change call_home authenticate
  • export event
  • show file export_path
  • show file package_result
  • show file notification
  • delete file
  • change notification trap
  • change call_home general
  • show file package_result
  • show file notification
  • delete file
  • show file notification
  • delete file
Deleted commands:
  • change notification trap

Issue 03 (2017-08-30)

This is the third official release. The updates are as follows:

Deleted download links of third-party tools.

Issue 02 (2017-06-01)

This is the second official release. The updates are as follows:

Added, modified, and deleted some commands.

Issue 01 (2017-02-28)

This is the first official release.

Traducción
简体中文
Descargar
Updated: 2018-10-15

N.° del documento: EDOC1000138381

Vistas:144135

Descargas: 30

Average rating:
This Document Applies to these Products
Documentos relacionados
Share
Anterior Siguiente
Huawei Enterprise APP

Copyright © 2018 Huawei Technologies Co., Ltd. Todos los derechos reservados.