Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback :

Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).

About This Document

Purpose

Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.

This document is applicable to the following product models.

Product Series	Product Model
OceanStor 18000 V3 series	OceanStor 18500 V3/18800 V3

Intended Audience

This document is intended for:

Technical support engineers
Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol	Description
	Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
	Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
	Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
	Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury.
	Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 07 (2018-07-30)

This is the seventh official release. The updates are as follows:

Added commands:

show ldap_server general
change ldap_server
show rsf upgrade_check_info
export file_system_tier_info
swap dr_star_member remote_replication
show nfs nfsv41_session_forechannel
change nfs nfsv41_session_forechannel
change disk_domain disk_log
show disk_domain disk_log
change lun_takeover enhance_switch
show nas_mem slot_info
show upgrade port_failover_switch
change upgrade port_failover_switch
add snapshot_group snapshot
remove snapshot_group snapshot
show takeover_switch global_enhanced_masquerading_switch
show nfs nfsv41_stat
clear nfs nfsv41_stat
rst_svc_ctl.sh
show nfs nfsv41_err_stat
show disk_domain set_disk_group
change takeover_switch global_enhanced_masquerading_switch
show nas_log function_debug_info
change nas_log function_debug_info
proto nas_vfs show_file_by_path
change nfs nfsv4_idmap_numerical
show nfs nfsv4_idmap_numerical
change tgt_switch vxvm_dmp_feature
memstat.sh
show tgt_switch vxvm_dmp_feature
change hyper_metro_consistency_group general*
change hyper_metro_pair general*
show client top
show file top
show file_system top
show disk_group
change remote_replication startup
change consistency_group startup
scsi showvaaistat
scsi showreportlun
ntpq
rephc showtntstatus
rephc queryarrayinfo
rephc queryisoinfo
rephc showalltntpairlock
rephc shownastaskinfo
change nfs nfsv41_session_trunking_support
show nfs nfsv41_session_trunking_support

Modified commands:

show ddp domain_info
delete quorum_server_link db
pal rescue showtaskinfo
change disk_domain format_parallel
quota show volhang
delete configuration_log
delete quorum_server db
quota show poolhang
change fdsa switch
eam alarm
delete clone_db
delete clone_dcl
delete clone_rsstype
upgradesystem
show dedup_compress_lun general
Qos show vol_poss
show cache_partition ratio
show disk_domain format_mode
change disk_domain format_mode
qos show io_class_timerecord
ckgiof showincon
ckgiof ckgtrans
ms showdisk
kvdb calcucrc
nmgr showinst
spa extlist
spa crccheck
qos show io_class_schdinfo
Qos show io_class_param
change storage_pool repair_lun
bgr showcounter
change logical_port failover_switch
sysforcepoweron
change cluster controllers
test logical_port failover
change fdsa check_item_switch
change logical_port failover
change cache_partition write_policy
upgrade_clearflag.sh
eam showevent
change iod schedule_information
show nfs nfsv4_opened_files
create upgrade session
arb showall
arb showtrace
change cache_partition ratio
change cifs keep_alive_switch
change cifs keep_idle
change cifs log_level
change cifs reserve_bit
change cifs rtt_switch
change cifs smb3_switch
change file_system amend
change file_system check
change file_system force_expand
change file_system min_fs
change file_system vstore
change fs_clone split_concurrent_num
change fs_clone split_concurrent_size
change fs_clone split_force
change fs_snapshot check_strategy
change remote_replication cfg_switch
change service ndmp_delete_snapshot
change space check_space_consistency
change space rescue_config
change statistics_switch ftp
change system external_tlv_channel
clear cifs connection
clear cifs fp_record
clear cifs server_stat
clear cifs smb1_stat
clear cifs smb2_stat
clear fs_snapshot residual_clone_ref
clear performance ndmp
clear pim stat
delete file_system force
delete file_system scrub_error_info
delete hyper_metro_pair dump
disklog repairio
disklog showobj
export file_system dirtydata
mr showblkmgr
mr showckgmgr
mr showfilestatus
mr showflowcnt
mr showloginfo
mr showstatus
mr showtreehandle
mrm showcounter
mrr repairextentcountshow
mrr showflow
mrr showrpoolaction
ms showscan
ms showtask
show antivirus mempool
show antivirus scan
show cifs connection
show cifs fp_record
show cifs reserve_bit
show cifs rtt_switch
show cifs server_info
show cifs server_stat
show cifs smb2_stat
show cifs smb3_switch
show dha judgeboundary
show dha judgeproportion
show dha modelswitch
show disk slowthreshold
show disk_reliability_policy slow_disk_detect
show file_system check
show file_system dirtydata
show file_system min_fs
show file_system rescue
show file_system scrub
show file_system scrub_error_info
show fs_clone split
show fs_clone split_concurrent_num
show fs_clone split_concurrent_size
show fs_snap_control action
show fs_snap_control all_task_info
show fs_snap_control code
show fs_snap_control last_task_id
show fs_snap_control status
show fs_snap_control task
show fs_snapshot resource
show hypervault_backup general
show hypervault_event general
show hypervault_restore general
show nfs server_info
show performance ndmp
show pim stat
show protocol debug
show remote_replication cfg_switch
show space check_space_consistency
show space dmn_info
show space statistic_info
show statistic nfs_connection
show statistics ftp_connection
show statistics ftp_connection_count
show statistics_switch ftp
show system external_tlv_channel
sio show slowthresh
spa showqueueinfo
ss showtask
ssdc show bg
ssdc show copyspeed
ssdc show copystate
ssdc show mem
ssdc show objDelBlkDetail
ssdc show pt
ssdc show ssd
ssdc show st basic
ssdc show volCachedDataInfo
show logical_port failover_switch
delete fs_private_snapshot force
pair showcounter
change disk slowthreshold
change dha singlemodelconfig
change disk ak_auth_recover
change file_system switch
show file_system switch
change port enabled
show system configuration_log
change ddp limit_time
os_change_bayconfig.sh
show service ndmp_connection
show statistic ndmp_connection
change file_system scrub
change space global_config
show space global_config
change cifs share_cache
clear cifs share_cache
ccdb.sh
change cache destage_concurrent
show ftp stat
show ndmp stat
sshtoremoteExt
change disk_domain verify_pool_meta
show disk_domain verify_pool_meta
overload_ctrl show flowctrl_info
Qos show io_class_detail
help
ssdc show obj
sys showlockhandle
change logical_port failback
show smartqos_policy switch
change smartqos_policy function_enabled
change smartqos_policy switch
show smartqos_policy delay
show ldap_server general
change ldap_server
show rsf upgrade_check_info
export file_system_tier_info
swap dr_star_member remote_replication
show nfs nfsv41_session_forechannel
change nfs nfsv41_session_forechannel
change disk_domain disk_log
show disk_domain disk_log
change lun_takeover enhance_switch
change upgrade port_failover_switch
add snapshot_group snapshot
remove snapshot_group snapshot
show takeover_switch global_enhanced_masquerading_switch
rst_svc_ctl.sh
change nas_log function_debug_info
show fs_snapshot clone_ref
show cifs smb1_stat
change tgt_switch vxvm_dmp_feature
memstat.sh
change hyper_metro_consistency_group general*
change hyper_metro_pair general*
show disk_group
change file_system rescue

Issue 06 (2018-05-09)

This is the sixth official release. The updates are as follows:

Added commands:

poweroff enclosure
perf.sh
rst_svc_ctl.sh
change hyper_metro_pair general*
change hyper_metro_consistency_group general*
change lun_takeover enhance_switch
show upgrade port_failover_switch
change upgrade port_failover_switch
show hyper_metro_vstore_pair cfg_switch
show hyper_metro_pair cfg_switch
change hyper_metro_pair cfg_switch
change hyper_metro_vstore_pair cfg_switch
show hyper_metro_vstore_pair remaincfglog
xnetpal setnapisch

Modified commands:

show ddp mem_info
show ddp io_counter
show ddp meta_list
show ddp chunk_info
show ddp chunk_meta
show ddp ratio
change disk_domain verify_pool_meta
show disk_domain verify_pool_meta
change lun_cache force_destage
change omnilock open
change odx odx_enabled
cliget -d bbuinfo
cliget -d ledinfo
change verify_stripe config
cpy userinfo
delete quorum_server_link db
dcl counter
grain showAllocAlg
restore hotpatch
change disk_domain format_parallel
change ftds location
Qos show io_class_detail
show dlm resource_master
change smartqos_policy function_enabled
delete quorum_server db
devlun show verifystripeinfo
maint_debug_cli
show cache global
spacetx show
show cache blocked_page
show pair log_ctrl
volume show verifystripeinfo
volume showrescallstats
show smartqos_policy switch
show system force_write_back
show smartqos_policy delay
show system command_list
pair showqueueinfo
delete snapshot_rsstype
delete clone_db
delete clone_dcl
delete clone_rsstype
delete lun_migration_rsstype
delete lun_migration_dcl
delete lun_migration_db
change iscsi discover_multiport
show pair init_accessor
help
xrb showintermem
show dlm resource_proxy
change nfs nfsv3_readdir_buf
change nfs nfsv4_readdir_buf
show disk_domain format_mode
change disk_domain format_mode
scsi show reservation lun
change ccdb general
cgroup_manage.sh
setupsystem
cmm.sh
ckgiof showincon
ckgiof ckgtrans
ms showdisk
kvdb calcucrc
nmgr showinst
spa extlist
spa crccheck
os_upgrade_hotpatch.sh
change smartqos_policy switch
change system maintenance_ip
overload_ctrl show flowctrl_info
change storage_pool repair_lun
change remote_replication clear_difference
rm showmetaio
drvunf showiniioprofile
change verify_stripe enabled
drvunf showdetail
show system_disk upgrade_status
test logical_port failover
change fdsa check_item_switch
grain showAllocTree
spc showstatistic
change logical_port failover
change logical_port failback
change nfs nfsv3_forward_switch
show nfs nfsv3_forward_switch
show nfs nfsv4_opened_files
devlun showstepcount
create upgrade session
sys showgpoollock
false
erase
hiddr_test
arb showall
arb showtrace
cache show forcemirror
cache show prefetch
change cifs keep_alive_switch
change cifs keep_idle
change cifs log_level
change cifs reserve_bit
change cifs rtt_switch
change cifs smb3_switch
change controller dma_type
change cpu frequency
change dedup_lun scrub
change file_system amend
change file_system check
change file_system force_expand
change file_system isolate_object
change file_system min_fs
change file_system repair
change file_system vstore
change fsa open_lock
change fsa stat_switch
change hyper_metro_consistency_group link_status
change hyper_metro_pair full_sync_cfg
change hyper_metro_pair link_status
change hyper_metro_vstore_pair full_sync_cfg
change hyper_metro_vstore_pair link_status
change nas_log debug_switch
change nas_mem health_limit
change nfs nfsv3_readdirplus_support
change nfs nfsv4_idmap_support
change nfs recv_buf
change nfs rtt_switch
change nfs send_buf
change nfs stat_switch
change omnilock open
change omnilock rtt_switch
change pal async_delete
change pal clear_trunc_xattr
change pal rtt
change remote_replication full_sync_cfg
change remote_replication_vstore full_sync_cfg
change remote_replication_vstore link_status
change service ndmp_delete_snapshot
change shake_alarm general
change space check_space_consistency
change space config
change space grain
change space grain_extent_tree
change space grain_merge_tree
change space rescue_config
change spaceflow general
change spacetx timer
change spc rtt_switch
change statistics_switch ftp
change storage_pool repair_dedup_lun
change system external_tlv_channel
clear cifs connection
clear cifs fp_record
clear cifs server_stat
clear cifs smb1_stat
clear cifs smb2_stat
clear fsa operation_timeout
clear fsa request_stat
clear hyper_metro_consistency_group db
clear nfs connection
clear nfs nfsv3_lock
clear nfs nfsv3_lock_db
clear nfs nfsv3_nlm_stats
clear nfs nfsv3_stat
clear nfs nfsv4_dbuffer
clear nfs nfsv4_idmap_cache
clear nfs nfsv4_stat
clear nfs server_stat
clear nfs share_cache
clear omnilock brl
clear omnilock lock_client_stat
clear omnilock open
clear performance ndmp
clear pim stat
delete dedup_lun scrub_error_info
delete file_system force
delete file_system scrub_error_info
delete hyper_metro_domain db
delete hyper_metro_pair db
delete hyper_metro_pair dcl
delete hyper_metro_pair log
delete hyper_metro_pair rsstype
delete hyper_metro_vstore_pair db
delete hyper_metro_vstore_pair rss
delete hypervault dcl
delete hypervault rss_type
delete hypervault service_db
delete hypervault_db general
delete omnilock open
delete remote_replication_vstore db
delete remote_replication_vstore rss
delete space grain_extent_tree
disklog repairio
disklog showobj
drvsascbb getroutelist
drvsascbb readreg
epl linkq
epl versionservice
export file_system dirtydata
mr showblkmgr
mr showckgmgr
mr showfilestatus
mr showflowcnt
mr showloginfo
mr showstatus
mr showtreehandle
mrm showcounter
mrr repairextentcountshow
mrr showflow
mrr showrpoolaction
ms showscan
ms showtask
pal ctrl minloadinfo
remove hyper_metro_consistency_group member
rep showlastfailtrace
rephc querypair
rephc showAllCgLockInfo
rephc showAllPairLockInfo
rephc showCgLockInfo
rephc showluntopair
rephc showPairLockInfo
rephv lock show
rephv logzone show
rephv mutex show
rephv nego show
rephv policy show
rephv vault show
scsi show tpgstatus -l lunID
show antivirus mempool
show antivirus scan
show cifs connection
show cifs fp_record
show cifs reserve_bit
show cifs rtt_switch
show cifs server_info
show cifs server_stat
show cifs smb1_stat
show cifs smb2_stat
show cifs smb3_switch
show controller dma_type
show dedup_lun scrub
show dedup_lun scrub_error_info
show disk slowthreshold
show disk_reliability_policy slow_disk_detect
show file_system check
show file_system dirtydata
show file_system isolate_object
show file_system min_fs
show file_system optimization
show file_system repair
show file_system rescue
show file_system scrub
show file_system scrub_error_info
show fs_snap_control status
show fsa open_lock
show fsa operation_timeout
show fsa request_stat
show fsa stat_switch
show hyper_metro_consistency_group config
show hypervault_backup general
show hypervault_event general
show hypervault_restore general
show nas_log debug_switch
show nas_mem health_limit
show nfs connection
show nfs nfsv3_err_stat
show nfs nfsv3_lock_db
show nfs nfsv3_nlm_stats
show nfs nfsv3_nlm_svc_info
show nfs nfsv3_readdirplus_support
show nfs nfsv3_stat
show nfs nfsv4_dbuffer
show nfs nfsv4_err_stat
show nfs nfsv4_idmap_support
show nfs nfsv4_stat
show nfs readdir_buf
show nfs rtt_switch
show nfs server_info
show nfs server_stat
show nfs stat_switch
show nfs work_queue_info
show omnilock brl
show omnilock brl_lock_info
show omnilock file
show omnilock lock_client_info
show omnilock lock_client_stat
show omnilock lock_server_info
show omnilock lock_server_stat
show omnilock open
show omnilock open_lock_wait_info
show omnilock rtt_switch
show pal async_delete
show pal async_delete_apo
show pal async_delete_info
show pal attribute
show pal clear_trunc_xattr
show pal control_flow
show pal control_info
show pal control_trace
show pal counter
show pal dentry
show pal dentry_info
show pal directory
show pal event_record
show pal extra_attribute
show pal extra_attribute_list
show pal fai
show pal file_handle
show pal file_system_event
show pal file_system_perfomance
show pal file_system_service_stat
show pal forward_info
show pal link_table
show pal master_node
show pal memory
show pal notify_entry
show pal notify_memory
show pal path
show pal rtt
show pal snap_fai
show pal truncate_info
show pal vaai_io_counter
show pal vaai_list
show pal vaai_property
show pal vaai_task
show pal vaai_task_info
show pal vnode_attribute
show pal worm_file_attribute
show performance ndmp
show pim stat
show protocol debug
show ral counter
show rdcl dataset
show rel counter
show rel memory
show rel status
show rel task
show remote_replication_vstore cfg_switch
show remote_replication_vstore configuration
show space abnormal_file_system_info
show space apo_entry_info
show space apo_info
show space check_space_consistency
show space dmn_info
show space flow_control
show space flow_io
show space grain
show space grain_alloc
show space grain_defree
show space grain_dynamic
show space grain_extent_count
show space grain_extent_queue
show space grain_extent_tree
show space grain_extent_tree_status
show space grain_io
show space object_bonus
show space object_config
show space object_mem
show space object_set_info
show space sio
show space stage_info
show space statistic_info
show space task_flow_info
show space transaction
show space uberblock
show statistic nfs_connection
show statistics ftp_connection
show statistics ftp_connection_count
show statistics_switch ftp
sio show slowthresh
spa showqueueinfo
space.sh
ss showtask
ssdc show obj
sys showdblock
sys showlockhandle
sys showmem
sys showzoneinfo
tx mgr
vols showcmdcnt
os initibcpassword
show logical_port failover_switch
change remote_replication_vstore cfg_switch
show nfs nfsv3_forward_stat
clear nfs nfsv3_forward_stat
eam addmgrethip
change disk slowthreshold
change dha singlemodelconfig
change nfs age_time
show nfs age_time
change file_system switch
show file_system switch
change port enabled
show ad_process status
sys.sh
show service ndmp_connection
show statistic ndmp_connection
change file_system scrub
change file_system optimization
change file_system rescue
change hyper_metro most_domain_enabled
show hyper_metro most_domain_enabled
change space global_config
show space global_config
change cifs share_cache
clear cifs share_cache
ccdb.sh
devlun showctrl
show space_task general
show ftp stat
show ndmp stat
sshtoremoteExt
poweroff enclosure
change logical_port failover_switch
rst_svc_ctl.sh
change hyper_metro_pair general*
change hyper_metro_consistency_group general*
change lun_takeover enhance_switch

Issue 05 (2018-01-30)

This is the fifth official release. The updates are as follows:

Added commands:

restore_sysenclosure_info.sh
show failover_path general
cache show iomode
dmi.sh
show lun cache_sequence_flow
change port enabled
os resumebootmode
show global_task_restrict switch
change global_task_restrict switch
change remote_device degrade_param
help*
change disk_domain lid_switch
show disk_domain lid_switch
upgrade_atom
os_upgrade_coldpatch.sh
clear cifs share_cache
change cifs share_cache
change ddp limit_time
eam setoeminfo
eam framecode
eam getenclosureinfo
eam setframecascademode
eam setdefaultframecascademode
change tgt_switch caw_feature
change tgt_switch loss_inq
show tgt_switch loss_inq
show tgt_switch caw_feature
alarm sendalarm
clear_user.sh
showbayconfig
os resetdswconfig
change hyper_metro most_domain_enabled
show hyper_metro most_domain_enabled
change vlan_offload state
scsi showaluainfo
tgt gethostidlist
tgt showses
show driver queuedepth
change driver queuedepth
lm showluntopair
pair showHoldReqlist
pair showpairio
pair showlogmgr
pair showloglist
lm showlunservice
lmr showluntopair
bgr showoverload
ioctrl showhang
lmr show lunservice

Modified commands:

os_backup_info.sh
modifydbtableinfo.sh
show system configuration_log
xrb iom
xnet showctrlmsgnum
xnet showrpageinfo
logzonefreelogbylogid.sh
mp show path2lun
os showstatus
change disk_domain repair_pool_meta
cleardb
show kms statistics
show kms key
import kms key
show space global_config
change remote_device transport_optimize
change system force_write_back
cache show obj
change disk factory_reset
change file_system optimization
change file_system rescue
change file_system scrub
change nfs age_time
delete root_cause_alarm rule
os_change_bayconfig.sh
show nfs age_time
show service ndmp_connection
show statistic ndmp_connection
show disk_bom blacklist
show disk_bom list_config
show disk_bom whitelist
change cache seqflow
sys.sh
omm show_status
show failover_path general
change file_system switch
clear configuration_data
show file_system switch
change space global_config
ccdb.sh
show global_task_restrict switch
change global_task_restrict switch
change remote_device degrade_param
clear cifs share_cache
change cifs share_cache

Issue 04 (2017-11-30)

This is the fourth official release. The updates are as follows:

Added commands:

cache show dirty cachebase
cache show limitio
cache show saslimitinfo
cache show conflict
cache show destage
cache show writehole
cache show poolConcur
cache show concur
cache show seqflow
cache show deamon
cache show cachetask
cache show fschunk
cache show fsdnode
cache show timeout
cache showlogstatus
change iod schedule_information
show iod schedule_information
show nfs nfsv4_opened_files
bdm_diskbomlist.sh
change remote_device transport_optimize
sys showpoollock
sys showgpoollock
change disk ak_auth_recover
upgrade.sh
appfs_cp
appfs_up
bdinfo
boot
bootd
cfgfs_cp
base
bootm
bootp
cfgfs_up
coninfo
datafs_cp
datafs_reset
datafs_up
cp
crc32
ddr_test
cmp
dt
echo
false
flashdata_burning
fsinfo
dts
editenv
erase
flinfo
fsload
hiddr_test
iminfo
go
itest
loadb
loads
loop
loady
mtdparts
nfs
nm
passwd
lswwrite
md
mm
mtest
mw
lswread
protect
rootfs_cp
rootfs_up
phyread
phywrite
rarpboot
saveenv
setenv
spi_test
true
uboot0_up
uboot1_up
run
sleep
tftpboot
uboot_cp0
uboot_cp1
version
printenv
fssnap show snapchangelist recordInfo
fssnap show snapchangelist kvInfo
fssnap show snapchangelist logIndexObjInfo
fssnap show snapchangelist logObjInfo
fssnap show snapchangelist logObjData
fssnap show snapchangelist logMgt
fssnap show snapchangelist allSession
fssnap show sessionInfo
fssnap show tsmConcurrency
fssnap show allTsmSession
delete fs_private_snapshot force
show nfs nfsv3_forward_stat
clear nfs nfsv3_forward_stat
bdm_efuseswitch.sh
iod waittrace show
change iod waittrace
show iod stat_switch
change iod switch
iod show timer
context showcnt
iod tp show
context show all
os_clean_ipconfig.sh
eam addmgrethip
Overload_ctrl show cur_cpu_load
bgr showevent
pair showevent
bgr showjobinfo
rim showio
ioctrl showio
spc showbonuscacheinfo
change disk dif_error_stat
os rebootdsw

Modified commands:

show context general
show space grain_extent_tree_status
show file_system check
show ddp accelerate_card
show rel counter
show rel task
show rel memory
show pal replication_info
show pal forward_info
show pal vaai_task
show pal vaai_list
show pal file_system_perfomance
show pal event_record
show pal control_flow
show pal directory
change pal rtt
change pal async_delete
show space sio
show space grain_io
change space grain_extent_tree
show space grain_extent_queue
show space grain_alloc
show space grain_dynamic
show space task_flow_info
show space grain_defree
show space quota
show space object_bonus
show space object_mem
show space object_config
show space stage_info
show space flow_control
show space grain
change fs_snapshot check_strategy
change spacetx timer
show rel status
show space apo_info
show space apo_entry_info
show antivirus mempool
show scsi_upgrade_config upgrade
cache show chunktrace
cache show iotrace
cache show timepoint
change cache clear_obj
change file_system isolate_object
change identity_mapping cache_config
change nfs send_buf
arp
btree showcounter
cache show chunk
cache show dirty bitmap
cache show forcemirror
cache show label
cat
change cifs reserve_bit
change file_system_possessed general
change nfs age_time
cache show partition
change cache file_system_hitcount
change cache fs_dsgbase_concur
change nas_mem health_limit
clear performance ndmp
cpy listprocess
change spaceflow general
change spc rtt_switch
change system cache_write_quota
cln getglobalvar
cmm show modmem
cpy showextluninfo
devlun showbadio
devlun showusedlun
devlun showwritealloclist
change ssd diagswitch
cpy pair
date
delete root_cause_alarm rule
devlun showcbcnt
devlun showtimeoutio
du
epl showintf
epl showtask
epl versionservice
extent showdrarb
extent showdstlist
extent showdstobjrbnodenum
extent showinitprintswitch
lm showldb
lm showsysevent
lmr showlock
lmr showtaskctrlinfo
odx showdstlist
odx showsessionlist
pal ctrl showtask
pal quota show scanstat
pal retry show
extent showdstpoolinfo
extent showfastmigrationmode
lmr showgdb
logzone show retrymgr
mm showcopy
odx showrec
pal adel show all
pal ctrl showplugin
pal dentry showinfo
pal quota show fsscaninfo
pal quota show scaninfo
rephc querydomainarbLink
rephc showlicense
bgr showalljobnumber
bgr showbgrinfo
cache show ckg
cache show cmd
cache show retrylist
change cache clear_evict
change controller dma_type
change fsa open_lock
change nfs recv_buf
devlun showcmdcbcount
devlun showtimerinfo
drvfcoe showall
epl linkq
epl showspec
exit*
export file_system dirtydata
extent showdrasort
extent showfastinitswitch
grain showFillPolicy
lmr showspec
logzone bdm read
logzone show disk
logzone show logid
logzone show workctrl
odx showsrclist
pal ctrl minloadinfo
pal ctrl show fsstat
pal rel showfaultheal
pal showfsspec
rep showlastfailtrace
show controller dma_type
show cpu
show fsa open_lock
show nfs work_queue_info
show pal counter
change system external_tlv_channel
change system force_write_back
cln getfreelistinfo
cmm show rsvdmemory
delete dedup_lun scrub_error_info
drvfcoe showbusyexch
drvfcoe showversion
epl showreport
exportmemdb
extent showdrainfo
extent showiomdstobjinfo
grain showMergeTreeItemNum
lm showhealstate
lm showtaskctrlinfo
lmr showhealstate
lmr showldb
lmr showpairctrlinfo
lmr showsysevent
mm showcallcount
odx showbgrwaitinglist
odx showspec
os_change_bayconfig.sh
rephc showstartinfo
rephc showWaitSelfHealevent
setsysdirtydataflag.sh
show cifs reserve_bit
show dedup_lun scrub
show dlm ccdb_receive_event
show file_system mounts
show nfs rtt_switch
show pal control_trace
show pal memory
show sdd array_conf
show sdd io_stat
show space uberblock
show ssd diagswitch
show system trace
showdiskinfo
showsysstatus
ssdc show pt
ssdc show st basic
sys showfsminiloadtime
volume showcowentry
volume showmetacmdstepcnt
rep showcall
rephc showalltask
show file_system isolate_object
show lun_possessed general
show nas_mem health_limit
show ral counter
show system trace_with_type
ssdc show objDelBlkDetail
sys showcfgcmdhistory
sys showcfglog
sys showcmdhistory
umount
volume showbadio
volume showbgswitch
volume showresformatinfo
show dedup_lun scrub_error_info
show file_system min_fs
show file_system_possessed general
show identity_mapping cache_config
show loopback test
show root_cause_alarm rule
show statistics ftp_connection_count
show system external_tlv_channel
snap showcapacity
snap showgdbinfo
snap showldbinfo
ssdc show copyspeed
ssdc show mem
sshtoremote
tx mgr
vols showtaskcnt
volume showrealpart
show performance ndmp
show service ndmp_connection
show space grain_extent_count
ssdc show bg
ssdc show copystate
ssdc show obj
ssdc show ssd
volume show verifystripeconfig
volume showbgnum
volume showmetacmdcnt
change ddp metadata_rebuild
os changebootfromtftp
os setforbidlogintime
os generatesshkey
os initibcpassword
os setmaxfailcnt
show system inter_ip
show ddp metadata_rebuild
space.sh
scsi show iocount
rephc showcgruncnt
show meta_data
show pal path
show nfs stat_switch
change file_system force_expand
show fs_snap_control action
show fs_snap_control all_task_info
show fs_snap_control code
show fs_snap_control last_task_id
show fs_snap_control status
show fs_snap_control task
logzone.sh
delete hyper_metro_pair dcl
delete hyper_metro_pair rsstype
delete hyper_metro_domain db
clear hyper_metro_consistency_group db
show hyper_metro_consistency_group config
remove hyper_metro_consistency_group member
change hyper_metro_consistency_group link_status
drvsascbb readreg
drvsascbb showdevinfo
drvsascbb getroutelist
drvsascbb showrsc
drvsascbb getfwinfo
delete file_system scrub_error_info
show file_system dirtydata
show pal fai
show pal replication_task_info
show pal vaai_task_info
show pal vnode_attribute
show file_system repair
show file_system scrub_error_info
change scsi_upgrade_config upgrade
delete private_device db
show fs_security descriptor
change slow_system_disk monitor_parameter
delete hypervault dcl
delete hypervault rss_type
delete hypervault service_db
delete hypervault_db general
drvist showconfid
drvist showconfig
drvist showmgmt
drvist showtracecmd
drvist showstatus
drvisi showremottgtinfo
sys showlicswitch
cache show iocounter
cache show prefetch
cache show concurrent
cache show mirror
cache show waitalloc
rephc showCgInt
rephc showAllCgLockInfo
rephc showCgLockInfo
rephc querydomainarb
rephc querydomain
rephc querydbpair
rephc queryldbpair
rep showtrace
rephc showluntopair
rephc showAllPairLockInfo
rephc showPairLockInfo
rephc showspec
rephc querypair
xnet showxcmthread
pair showobjs
bgr showalljobinfo
show fs_snapshot resource
show pal async_delete_info
show space abnormal_file_system_info
show space check_space_consistency
show space dmn_info
show space grain_extent_tree
show space object_set_info
show space transaction
show statistics ftp_connection
sys.sh
show nfs readdir_buf
show system work_mode
change file_system rescue
show file_system rescue
change space rescue_config
show file_system optimization
change file_system scrub
show file_system scrub
change system support_enclosure
show statistic nfs_connection
delete hyper_metro_vstore_pair rss
change controller offline
change disk slowthreshold
add shake_alarm general
scsi show tpgstatus -l lunID
tgt show portlist
tgt show lunmap
tgt show command
tgt show mapview
tgt show rtt
tgt show state
tgt show host
tgt show io
scsi show reservation all
showioinfo.sh
cmm show memrecoverflag
sys showdiflevel
change extent fast_migration_mode
change extent init_print_switch
change extent relocation_period
change extent fast_init_switch
change extent large_io_threshold
show extent large_io_threshold
clear nfs nfsv3_lock
change mp_mode
clear nfs nfsv4_idmap_cache
show disk_bom list_config
show disk_bom blacklist
show disk_bom whitelist
change dha switch
sshtoremoteExt
change disk clearerrordlt
change disk fault
change disk sn
restore disk general
change disk iolimit
sys showdblock
change cache dsgbase_concur
cache show global
change dha judgeboundary
change dha judgeproportion
change dha modelswitch
change dha scorestrategy
change dha singlemodelconfig
show dha judgeboundary
show dha judgeproportion
show dha modelswitch
show dha scorestrategy
show dha singlemodelconfig
change dha servicestatus
change dha policy
change disk unplug
show dha policy
show dha score
show sched
change sched
show dha servicestatus
show disk unplug
change disk factory_reset
change disk prefail
ld show beingsynclds
ld show disk
ld show var
sddebug show disk
ld show dp
ld show slaveevent
ld show tmpdisks
sddebug show device
sio show slowthresh
sio show statall
sio show bdmiostat
hdm show diskfwconf
hdm show logpage
hdm show diagrecord
sio show deviostat
show fs_clone split
mr showbgtask
mr showblkalloclist
mr showfilestatus
mr showlogcmdcnt
mr showlogcmdmgr
mr showlogtriginfo
mrm showreclaimtask
mrr rluncounter
mrr showenvaction
mrr showrpinfo
mr checkblkmgr
mr showfilemgr
mr shownoservicelun
mr showobjset
mr showswitchsetting
mr showsysnobaklun
mr showtreehandle
mr showtreeswitchstate
mrr rlunshowlogzone
mrr showcheckinfo
mr actioncounter
mr bgrcounter
mr checkcrc
mr resource
mr showflowcnt
mr showloginfo
mr showstatus
mrm list
mrm showcounter
mrm showmem
mrr backupbuildcounter
mrr list
mrr rebuildbtreeactioncount
mrr repairextentcountshow
mrr rlunshowclsstatus
mrr showcfsaction
mrr showflow
mrr showvfsaction
mr showbackupapplywaitlist
mr showblkarr
mr showblkmgr
mr showckgmgr
mr showreserve
mrr rlunshowflow
mrr rlunshowlogzonecnt
mrr showfsraction
mrr showfsrepairstatus
mrr showrowlunrepairaction
mrr showrpoolaction
change sas_card disk_path_selector
show sas_card disk_path_selector
disklog show
bst restoreio
ckgiof showtmoutreq
ckgiof showwriteerr
ckglock showmasterplock
ckgiof ehstate
ckgiof luntrans
disklog repairio
fmt io
fmt showflowinfo
fmt showtask
leveling querydisk
ms showio
pmgr showpool
disklog showrepair
fmt showbgr
fmt showdisk
fmt showparallel
leveling io
ms showtask
pmgr showalltask
pmgr showvideocfg
recon debugshowstart
disklog showobj
disklog showstate
disklog showtreeobj
fmt showdomain
leveling progress
ms showscan
pmgr showdisk
disklog showlogzone
disklog showpoolnowrite
fmt showglobal
ms showtime
pmgr showPoolInfo
pmgr showsysbitmap
recon showio
ss showdisk
ss showtask
writehole showlist
ss showio
writehole showwh
ss showperiod
ss showpool
ss showscan
writehole io
ckgiof io
kvdb alltable
kvdb itemcache
kvdb nodecache
kvdb baseinfo
nmgr searchnode
mcachelayer queryckg
mcachelayer queryext
nmgr showallinst
spa exportimportnode
spa querypoolcap
spa queryvolcap
spa queryvolquota
spa showbgrcount
spa showrootckg
spa exportimportextent
spa querydpsyncinfo
spa showqueuemgrstat
spa showsmolog
spa showxnetstat
spa zoneckgextnum
spa exportimportckg
spa exportimportnode_ext
spa showmrckg
spa showqueueinfo
spa showqueueobj
spa showsmgrerrcn
spa showvolaction
nmgr showfunc
mcachelayer counter
spa bgrcnt
spa showckgreq
kvdb memory
kvdb tableid
change hyper_metro_vstore_pair link_status
delete hyper_metro_pair log
show mp_mode
show array_support_lib general
change hyper_metro_pair link_status
delete hyper_metro_vstore_pair db
show statistic ndmp_connection
clear nfs nfsv4_dbuffer
change shake_alarm general
show shake_alarm general
initlocalpasswd
show nfs nfsv4_dbuffer
show noma rtt_jitter
change root_cause_alarm rule
tgt show timeoutio
show pal snap_fai
change file_system check
show pal async_delete_apo
omm show_status
change space grain
delete space grain_extent_tree
show disk slowthreshold
change disk_domain meta_space_utilization
sys showlockhandle
show antivirus scan
show hypervault_restore general
show hypervault_backup general
arb showall
arb showtrace
pair showcounter
ccdb.sh
upgrade disk_convertor
show disk_convertor upgrade_status
show nfs server_info
clear nfs nfsv3_nlm_stats
clear nfs server_stat
clear nfs nfsv4_stat
clear nfs nfsv3_stat
change nfs nfsv3_readdirplus_support
change nfs stat_switch
change nfs rtt_switch
show nfs nfsv3_nlm_stats
show nfs nfsv4_err_stat
show nfs nfsv3_nlm_svc_info
rephv mutex show
rephv logzone show
rephv policy show
rephv lock show
rephv vault show
rephv nego show
change nfs nfsv4_idmap_support
clear nfs nfsv3_lock_db
clear nfs share_cache
show nfs nfsv4_idmap_support
show nfs nfsv4_stat
show nfs connection
show nfs nfsv3_stat
show nfs nfsv3_err_stat
show nfs nfsv3_lock_db
show nfs nfsv3_readdirplus_support
show nfs age_time
show nfs server_stat
change fsa stat_switch
clear fsa operation_timeout
clear fsa request_stat
show fsa stat_switch
ssdc show volCachedDataInfo
show fsa request_stat
show fsa operation_timeout
delete file_system force
change cache_partition ratio
change statistics_switch ftp
show statistics_switch ftp
show cifs connection
show cifs server_info
show cifs server_stat
show cifs smb1_stat
change cifs keep_idle
clear cifs fp_record
clear cifs server_stat
clear cifs smb1_stat
clear cifs smb2_stat
show cifs fp_record
show cifs smb2_stat
show cifs smb3_switch
show omnilock brl_lock_info
show omnilock lock_client_stat
show omnilock lock_server_info
show omnilock lock_server_stat
show omnilock open_lock_wait_info
show omnilock open
show omnilock brl
show nas_log debug_switch
change cifs rtt_switch
change omnilock rtt_switch
show cifs rtt_switch
show omnilock rtt_switch
change omnilock open
show dedup_lun repair_info
show lun repair_info
clear pim stat
show pim stat
show protocol debug
clear fs_snapshot residual_clone_ref
change fs_clone split_force
change space config
show hypervault_event general
change noma rtt_jitter
change file_system optimization
change space grain_merge_tree
show fs_snapshot clone_ref
change disk_domain leveling
change disk_domain stripe_restore_repair
change disk_domain clear_disk
change disk_domain stripe_restore_data
delete disklog
show disk_domain stripe_verify_restore
change storage_pool lun_online
change pal clear_trunc_xattr
show pal clear_trunc_xattr
add root_cause_alarm rule
change file_system vstore
cache show evict
show omnilock lock_client_info
clear cifs connection
change cifs log_level
change file_system min_fs
rephc showcgcfg
change space check_space_consistency
lm showpairctrlinfo
lm showgdb
delete hyper_metro_pair db
show omnilock file
change system work_mode
show fs_clone split_concurrent_num
change fs_clone split_concurrent_num
clear configuration_data
pair showSyncStatics
show rdcl dataset
show rdcl data_change_log
rdcl showtxcheck
show rdcl io
change odx job_information
change fs_clone split_concurrent_size
show fs_clone split_concurrent_size
change hyper_metro_vstore_pair full_sync_cfg
change hyper_metro_pair full_sync_cfg
change file_system amend
change dedup_lun scrub
change cache seqflow
delete hyper_metro_pair dump
change storage_pool repair_dedup_lun
change file_system repair
snap showaction
snap showlogzone
snap showflag
vols showcmdcnt
os showipconfig
show logical_port failover_switch
change protocol debug
change service ndmp_delete_snapshot
show disk_reliability_policy slow_disk_detect
delete remote_replication_vstore rss
delete remote_replication_vstore db
eam showevent
eam showglobaldbtable
delete firewall configuration
upgrade system_disk
showsystrace
sys showfrustatus
os_write_bay_cfg.sh
devlun showstepcount
sys showclm
sys showcmdlist
sys showzoneinfo
change cache dsg_poolconcur_watermark
change remote_replication_vstore link_status
show remote_replication_vstore configuration
sys showcls
sys showflowstatus
sys showobjstatus
sys showflowtrace
sys showtrace
sys showmem
sys showsyslock
sys showfailedtrace
sys showfailedflowtrace
sys showglunlock
sys showlunlock
allalarm
qerr
overtime
rfru
getkerlog
is
showphy
showversion
rsensor
showdisk
showcpld
showfan
showpower
ai
fssnap show ro recy
fssnap show ro capacity
fssnap show ro src_fs_os
fssnap show ro base
fssnap show deadlist
fssnap show snap_dmn
fssnap show ro dataset
fssnap show bpo_in_subbpo
fssnap show bp_in_bpo
fssnap show deadlist_obj
fssnap show bpo
spc showstage
spc showrtt
spc showapohashtable
change disk_reliability_policy slow_disk_detect
cache show obj
change nas_log debug_switch
clear omnilock open
clear omnilock brl
change cifs keep_alive_switch
delete omnilock open
change cifs smb3_switch
clear nfs connection
show logical_port failover_switch
show space statistic_info
change space global_config
show space global_config
change remote_replication_vstore full_sync_cfg
change remote_replication_vstore cfg_switch
change remote_replication cfg_switch
show remote_replication cfg_switch
show remote_replication_vstore cfg_switch
change remote_replication full_sync_cfg
clear omnilock lock_client_stat
change cluster master
drvist showperf
drvist showsess
drvist showallinfo
drvist showport
drvist showlink
drvist showsessonport
show space statistic_info
show space flow_io
minisystem
change rdcl io_clear
show file_system switch
change file_system switch
cache show dirty cachebase
cache show limitio
cache show saslimitinfo
cache show conflict
cache show destage
cache show writehole
cache show poolConcur
cache show concur
cache show seqflow
cache show deamon
cache show cachetask
cache show fschunk
cache show fsdnode
cache show timeout
cache showlogstatus
change space global_config
change space global_config
change cache file_system_hitcount
cache show obj
sys showcfglog
sys showfsminiloadtime
change cache dsgbase_concur
change cache file_system_hitcount
change system force_write_back
show noma rtt_jitter
change noma rtt_jitter
change disk ak_auth_recover
cache show seqflow
change dha judgeboundary
change dha judgeproportion
change dha modelswitch
change dha policy
change dha scorestrategy
change dha servicestatus
change dha singlemodelconfig
change dha switch
change disk slowthreshold
change remote_replication_vstore cfg_switch
restore disk general
show dha policy
show dha score
show dha scorestrategy
show dha servicestatus
show dha singlemodelconfig
show noma rtt_jitter
clear configuration_data
show nfs nfsv3_forward_stat
clear nfs nfsv3_forward_stat
change disk slowthreshold
change mp_mode
change file_system switch
show file_system switch
show file_system switch
change file_system switch
ccdb.sh
change space global_config

Deleted commands:

show space statistic_info

Issue 03 (2017-08-30)

This is the third official release. The updates are as follows:

Deleted download links of third-party tools.

Issue 02 (2017-06-01)

This is the second official release. The updates are as follows:

Added, modified, and deleted some commands.

Issue 01 (2017-02-28)

This is the first official release.

Traducción

简体中文

Descargar

Updated: 2018-09-05

N.° del documento: EDOC1000138389

Vistas:38663

Descargas: 62

Average rating:

This Document Applies to these Products

Documentos relacionados

Productos

Soluciones

Por industria

Zona de servicios

Contacto

Documentación y software

Buscar un partner

Pedidos y consultas

Contáctenos

Buscar un partner

Conviértase en partner

Zona de partners

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

About This Document

Purpose

Intended Audience

Symbol Conventions

Change History

Issue 07 (2018-07-30)

Issue 06 (2018-05-09)

Issue 05 (2018-01-30)

Issue 04 (2017-11-30)

Issue 03 (2017-08-30)

Issue 02 (2017-06-01)

Issue 01 (2017-02-28)

Enterprise

Consumer

Corporate

Carrier

AFRICA

MIDDLE EAST

ASIA PACIFIC

EUROPE

LATIN AMERICA

NORTH AMERICA

Productos

Soluciones

Por industria

Zona de servicios

Contacto

Documentación y software

Buscar un partner

Pedidos y consultas

Contáctenos

Buscar un partner

Conviértase en partner

Zona de partners

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

About This Document

Purpose

Intended Audience

Symbol Conventions

Change History

Issue 07 (2018-07-30)

Issue 06 (2018-05-09)

Issue 05 (2018-01-30)

Issue 04 (2017-11-30)

Issue 03 (2017-08-30)

Issue 02 (2017-06-01)

Issue 01 (2017-02-28)