No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

Parts Replacement

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. This document describes the procedure for replacing the parts of storage system in terms of safety operations, preparations, and precautions.
Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Introduction

This document describes the procedure for replacing the parts of OceanStor 2800 V3 storage system in terms of safety operations, preparations, and precautions.

This document provides the process and methods of replacing OceanStor 2800 V3 storage system parts.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Conventions

As part of an effort to improve and enhance the product performance and capabilities, Huawei periodically releases revisions of the hardware and software. Therefore, some functions described in this document may not be supported by all versions of the software or hardware currently in use. For the most up-to-date information about product features, refer to the product release notes.

If a product does not function as described in this document, contact Huawei technical support engineers.

Symbol Conventions

The symbols that may be found in this document are defined as follows:

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 07 (2018-07-30)

This is the seventh release.

Optimized some description.

Issue 06 (2018-05-09)

This issue is the sixth official release.

Updated SmartKit operations in Replacing an FRU.

Issue 05 (2018-01-30)

This issue is the fifth official release.

Rectified some description of replacing a controller.

Issue 04 (2017-11-30)

This issue is the fourth official release.

Optimized the description in the documentation.

Issue 03 (2017-08-30)

This issue is the third official release.

Rectified some description of replacing a controller.

Issue 02 (2017-06-01)

This issue is the second official release.

Added the procedure for removing/inserting the power cables.

Issue 01 (2017-02-28)

This issue is the first official release.

Traducción
Descargar
Updated: 2018-10-15

N.° del documento: EDOC1000138807

Vistas:3143

Descargas: 9

Average rating:
This Document Applies to these Products
Documentos relacionados
Share
Anterior Siguiente