No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

Advanced O&M Command Reference

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Purpose

Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.

This document is applicable to the following product models.

Product Series

Product Model

OceanStor Dorado V3 series

Dorado5000 V3

Dorado6000 V3

Dorado18000 V3

Intended Audience

This document is intended for:
  • Technical support engineers
  • Maintenance engineers

Content Conventions

The purchased products, services, and features are stipulated by the commercial contract made between Huawei and the customer. All or partial products, services and features described in this document may not be within the purchased scope or the usage scope. Unless otherwise agreed by the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees, or representations of any kind, either express or implied.

As part of an effort to improve and enhance the performance and capabilities of its product line, Huawei Technologies Co., Ltd. from time to time releases revisions of its hardware and software. Therefore, some functions described in this manual may not be supported by all revisions of the software or hardware currently in use. For the most up-to-date information on product features, refer to your product release notes.

If a product does not function as described in this manual, please contact your Huawei Technologies Co., Ltd. technical support.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 09 (2018-08-30)

This is the ninth official release.

Added the description of using the remote SSH to deliver CLI commands to the disk array in chapter 1 "CLI Use Guidance".

Issue 08 (2018-07-15)

This is the eighth official release.

Added commands:

  • change pool_manager upgrade_rollback_check
  • show pool_manager upgrade_rollback_check
  • change tgt_switch vxvm_dmp_feature
  • show tgt_switch vxvm_dmp_feature
  • show upgrade port_failover_switch
  • change upgrade port_failover_switch
  • change pool_manager data_persistence_check
  • show pool_manager data_persistence_check
  • xnetpal iodschstat
  • xnetpal maxnoschtime
  • xrb iostaton
  • xrb iostatoff
  • xrb rspdelay
  • xrb rspstatswitch
  • xrb timeoutctxinfo
  • xrb iosizedis
  • xrb iobwdis
  • xrb rsptimediff
  • change cache switch
  • show cache switch
  • show zone_recycle rf_patrol
  • change zone_recycle rf_patrol
  • ncache show dsgheal
  • ncache show loadinfo
  • ncache show workerstat

Modified commands:

  • drvist showallinfo
  • drvist showport
  • drvist showtracecmd
  • sys showcmdlist
  • sys showdiflevel
  • sys showfrustatus
  • change cpu frequency
  • poweroff disk
  • poweron disk
  • poweron enclosure
  • change port eth_network_segment
  • showsystrace
  • sys showtrace
  • sys showflowtrace
  • resumebootmode
  • change fdsa check_item_switch
  • reboot expansion_module
  • upgrade.sh
  • os switchnet
  • xrb showstat
  • xnet showpciehb
  • xnet showpcieq
  • xnet showethsendq
  • os deldefaultip
  • ncache show destage
  • ncache show global
  • ncache show coffer
  • ncache show evict
  • ncache show structsize
  • ncache show queue
  • ncache show force_write_back
  • ncache show io
  • delete configuration_log
  • show lun_possessed general
  • show zoneio size
  • change lun_possessed general
  • delete snapshot_dcl
  • showdiskinfo
  • upgrade system_disk
  • show zone_public zone_object
  • change logical_port failback
  • change logical_port failover_switch
  • change logical_port failover
  • test logical_port failover
  • show logical_port failover_switch
  • create upgrade session
  • show system configuration_log
  • ncache show cmd
  • show failover_path general
  • sys.sh
  • restore oem_package
  • sysforcepoweron
  • ncache show label
  • show zone_recycle mgmt
  • upgrade disk
  • sys showobjstatus
  • sys showflowstatus
  • sys showcls
  • sys showmem
  • show disk_reliability_policy slow_disk_detect
  • change disk slowthreshold
  • ncache show obj
  • change metadata repair
  • drvunf showiniioprofile
  • change full_copy job_information
  • change pool_manager upgrade_rollback_check
  • show pool_manager upgrade_rollback_check
  • change tgt_switch vxvm_dmp_feature
  • show upgrade port_failover_switch
  • change upgrade port_failover_switch
  • change pool_manager data_persistence_check
  • change zone_recycle rf_patrol

Issue 07 (2018-04-03)

This is the seventh official release.

Added commands:

  • dpumm_mm show blockmgrinfo
  • dpumm_mm show blockusageinfo
  • dpumm_mm show layout
  • dpumm_mm show meminfo
  • dpumm_mm show memmgrinfo
  • dpumm_mm show memusageinfo
  • dpumm_mm show memuseinfo
  • dpumm_mm show modmem
  • dpumm_mm show moduleusage
  • dpumm_mm show usage
  • dpumm_shm show blockmgrinfo
  • dpumm_shm show blockusageinfo
  • dpumm_shm show layout
  • dpumm_shm show meminfo
  • dpumm_shm show modmem
  • dpumm_shm show usage
  • dpumm_shm showisolatedpage
  • dpumm_shm showmemstat numa
  • dpumm_shm showmemusagereserved
  • dpumm_shm showrecoveryflag
  • change pool_manager balance_task
  • show pool_manager balance_task
  • os resetdswconfig
  • show global_task_restrict switch
  • change global_task_restrict switch
  • dpumm_mm show attr
  • dpumm_shm show attr
  • dpumm_shm show page requestlist
  • showbayconfig
  • change remote_device degrade_param
  • show failover_path general
  • delete lun_copy_db
  • delete lun_copy_rsstype
  • restore system factory_mode
  • restore oem_package
  • import oem_package
  • dmi.sh
  • change metadata verify
  • show qos maxlimit_queue_info
  • show metadata verify_info
  • show qos node_token_log
  • show qos timer_running_span
  • show qos gen_token_running_span
  • show qos dequeue_running_span
  • show qos client_policy_flow_ctrl
  • show qos client_policy_divvy_perf
  • show qos client_policy_invest_info
  • show qos policy_obj_base_info
  • show qos policy_child_obj
  • show qos policy_obj_perf
  • show qos client_policy_invest_permit
  • show qos client_maxlimit_queue
  • change tgt_switch caw_feature
  • change tgt_switch loss_inq
  • show zone_recycle write_bandwidth
  • rst_svc_ctl.sh
  • change remote_replication startup
  • change consistency_group startup
  • show zone_recycle ratio
  • iod show waittime
  • show mds mirrror_log
  • show tgt_switch caw_feature
  • show tgt_switch loss_inq
  • perf.sh
  • change background_job background_job_qos_capability
  • change hyper_metro_consistency_group general*
  • change hyper_metro_pair general*

Modified commands:

  • change dha policy
  • show dha policy
  • restore configuration_data
  • restore hotpatch
  • sys showcls
  • sys showmem
  • sys showobjstatus
  • sys showcmdhistory
  • sys showdirtydataflag
  • sys showflowstatus
  • change bst configuration
  • backup configuration_data
  • change overload_control general
  • change lun_takeover disable_switch_path
  • drvsascbb readreg
  • drvsascbb getroutelist
  • xnet showpeerinfo
  • xnet showxcmthread
  • change full_copy job_information
  • couple showobjs
  • couple showqueuebufinfo
  • couple showqueuelistinfo
  • spacebcpy showbcpyinfo
  • show overload_control general
  • show dha singlemodelconfig
  • xrb iodelaydis
  • show qos node_flow_ctrl
  • show qos priority_flow_ctrl
  • show qos priority_io_stat
  • os_change_bayconfig.sh
  • os_upgrade_hotpatch.sh
  • setupsystem
  • sysforcepoweron
  • show kms key
  • drvunf showiniioprofile
  • logzone.sh
  • logzoneclearlogdata.sh
  • drvunf showdetail
  • xrb iomstat
  • xrb delay
  • xnet showqueuemsg
  • ncache show label
  • show metadata repair_counter
  • show metadata scan_info
  • show disk slowthreshold
  • change disk slowthreshold
  • om_show_omm_info.sh
  • change cluster master
  • change controller offline
  • show qos priority_queue
  • show disk_reliability_policy slow_disk_detect
  • change disk_reliability_policy slow_disk_detect
  • cgroup_manage.sh
  • change metadata repair
  • change disk_nvme_feature general
  • show disk_nvme_feature general
  • reset disk_nvme_feature general
  • spacebcpy showcounter
  • show driver queuedepth
  • ncache show obj
  • sys.sh
  • change odx job_information
  • change zone_recycle prior_list
  • show qos alarm_stat_info
  • show qos abort_io_info
  • show disk_domain general *
  • create disk_domain*
  • show system_disk upgrade_status
  • show zone_public ckg_info
  • show zone_public datazone_reference
  • show zone_public allocator_idle_ckgs
  • show metadata counter
  • show pool_manager logic_pool
  • show metadata repair_info
  • show zone_rebuild info
  • show zone_rebuild mgmt
  • show zone_recycle mgmt
  • show qos res_obj
  • show metadata info
  • pair showobjs
  • show ad_process status
  • couple showqueueinfo
  • upgrade disk
  • change zone_recycle self_balance
  • import kms key
  • omm show_status
  • dpumm_shm showisolatedpage
  • rephc showcgruncnt
  • rephc queryldbpair
  • logzonefreelogbylogid.sh
  • cleardb
  • show qos concurrency_obj
  • cache.sh
  • change disk factory_reset
  • ccdb.sh
  • change space global_config
  • xrb iom
  • show qos client_obj
  • show space global_config
  • change controllers_expansion cancel
  • show global_task_restrict switch
  • change global_task_restrict switch
  • delete lun_copy_db
  • delete lun_copy_rsstype
  • change metadata verify
  • show qos maxlimit_queue_info
  • show metadata verify_info
  • show qos node_token_log
  • show qos gen_token_running_span
  • show qos dequeue_running_span
  • change tgt_switch loss_inq
  • show lun_copy general
  • show zone_recycle write_bandwidth
  • change lun_copy general
  • delete lun_copy
  • create lun_copy local

Issue 06 (2017-12-30)

This is the sixth official release.

Added commands:

  • show qos alarm_stat_info
  • show block_manager space_grain_info
  • show block_manager disk_mem_info
  • show block_manager leak_block_scan
  • show block_manager io_performance
  • show qos abort_io_info
  • change pool_manager emergency
  • show pool_manager emergency
  • upgrade system_disk
  • show system_disk upgrade_status
  • change block_manager io_performance
  • change disk ak_auth_recover
  • delete lun_clone_dcl
  • delete lun_clone_rsstype
  • delete lun_clone_db
  • scan lun_scrub general
  • show lun_scrub general
  • show task_mgr media_scan
  • show task_mgr disk_info
  • show task_mgr disk_task_info
  • show task_mgr leaked_block_scan
  • restore cluster factory_mode
  • change task_mgr media_scan
  • os rebootdsw
  • show zone_recycle parallel
  • change task_mgr leaked_block_scan
  • tgt showses
  • tgt gethostidlist
  • change logical_port failback
  • change logical_port failover_switch
  • change logical_port failover
  • test logical_port failover
  • show logical_port failover_switch
  • os resumebootmode

Modified commands:

  • show cpu
  • show disk unplug
  • show dha servicestatus
  • show configuration_data backup
  • show configuration_data version
  • show system ib_copy_switch
  • show system configuration_log
  • setsysdirtydataflag.sh
  • drvisi showremottgtinfo
  • minisystem
  • change disk reset
  • show controller buffering_switch
  • show memory
  • change ccdb general
  • show dlm resource_proxy
  • change disk factory_reset
  • rsensor
  • showphy
  • logzonefreelogbylogid.sh
  • os_backup_info.sh
  • change upgrade flow
  • show upgrade status
  • change shake_alarm general
  • drvist showsess
  • pair showobjs
  • pair showcounter
  • change priority_weight
  • show sdparam
  • debug
  • change sched
  • change cluster controllers
  • xnet showctrlmsgnum
  • xrb iom
  • show disk depopulation
  • show disk link_rate
  • show qos concurrency_obj
  • show qos res_obj
  • change dha singlemodelconfig
  • show qos queue_info
  • show qos client_obj
  • cleardb
  • spacebcpy showjobinfo
  • show kms statistics
  • import kms key
  • show disk extradif
  • delete root_cause_alarm rule
  • change system force_write_back
  • xnet showrpageinfo
  • volume showctrl
  • help*
  • change tgt cmd_burst
  • cache.sh
  • ncache show datamanager
  • ncache show cmd
  • rocache show part
  • show metadata info
  • show metadata counter
  • os showipconfig
  • os showstatus
  • sio show slowthresh
  • lun showstepcount
  • couple showqueueinfo
  • lun showlbainfo
  • show mds time_trace
  • change zone_rebuild stripe_num
  • change zone_rebuild grain
  • show disk_domain general *
  • show writecache info
  • show writecache step
  • show logcache info
  • show logcache config
  • show logcache io
  • show zoneio wait_full_ckg
  • show zoneio recycle_ckg
  • show zoneio inconsistent
  • clear zoneio inconsistent
  • show zoneio write_ckg
  • show zoneio write_context
  • show zone_public grain_address_base_info
  • show zone_public zone_object
  • show zone_public task
  • show zone_public allocator_object
  • show zone_public free_list
  • show zone_public ck_head
  • show zone_public ckg_info
  • show zone_public free_grain_info
  • show zone_public capacity
  • show zone_public allocator_idle_ckgs
  • show zone_public allocator_count
  • show zone_public ckg_time_stamp
  • show zone_public ckg_block
  • show zone_public datazone_reference
  • show zone_public resource_volume_object_count
  • show zone_public ck_tail
  • show zone_public ckg_id_list
  • show zone_public ck_base_info
  • show zone_public ckg_num
  • show zone_public count
  • change cache recordio
  • show writecache count
  • show writecache_emergency status
  • change writecache_emergency status
  • change lun_cache force_destage
  • show pool_manager action_count
  • show pool_manager root_resource_volume_count
  • show pool_manager message
  • show pool stats
  • show pool config
  • show disk_mgr disk_list
  • show disk_mgr disk
  • show disk_mgr event_step
  • show disk_mgr event
  • show cache blocked_page
  • show lun_cache no_mirror_lun
  • show dop pool_view
  • show mdc pool_view
  • show kvs kv_map
  • show kvs pool_capacity
  • show kvs kvm_info
  • show kvs count
  • show kvs volume_capacity
  • show metadata repair_info
  • change snmp status
  • show dlm timestat
  • show dlm directory_task
  • create upgrade session
  • rephc querydomain
  • rephc showAllCgLockInfo
  • rephc showcgcfg
  • rephc showcgruncnt
  • rephc queryarrayinfo
  • rephc queryisoinfo
  • change zone_recycle force_ckg
  • show zone_recycle wait_ckg
  • show zone_recycle doing_ckg
  • show zone_recycle memory
  • change zone_recycle status
  • show zone_recycle garbage_check
  • show zone_recycle ckg_garbage
  • show lun_fault_enable
  • show zone_recycle info
  • rephc queryldbpair
  • rephc querydbpair
  • show block_manager disk_object
  • show block_manager pending_list
  • change disk_domain clear_disk
  • show zone_recycle mgmt
  • show zone_rebuild mgmt
  • show zone_rebuild info
  • show zone_rebuild io
  • show zone_recycle io
  • show zone_recycle perform
  • show task_mgr step
  • create disk_domain*
  • show system pool_config
  • show zone_public disk_block_num
  • change space global_config
  • show uck recvque
  • show uck process_info
  • show uck msg_info
  • change pool config
  • change pool stats
  • show space global_config
  • change system pool_config
  • change port enabled
  • change cache load_info
  • show zone_recycle list
  • show zone_recycle bandwidth
  • show pool_manager disk_pool
  • show pool_manager logic_pool
  • show pool_manager logic_pool_capacity
  • show pool flow
  • clear configuration_data
  • omm show_status
  • rim showio
  • change zone_recycle self_balance
  • change zone_recycle different_controller
  • show zone_recycle garbage
  • ccdb.sh
  • show zone_rebuild proc_check
  • show block_manager bitmap
  • show block_manager block_manager_object
  • show block_manager block
  • show block_manager die_fault_capacity
  • show block_manager io_count
  • show block_manager load
  • show block_manager pre_alloc_list
  • show block_manager resource_count
  • show block_manager trim_status
  • show block_manager write_size
  • show block_manager space_grain_info
  • show block_manager disk_mem_info
  • show block_manager leak_block_scan
  • show block_manager io_performance
  • show pool_manager message
  • show task_mgr step
  • show pool_manager logic_pool
  • show mds transform_info
  • show zone_recycle info
  • show zone_recycle list
  • show zone_recycle mgmt
  • show zone_recycle io
  • show zone_recycle perform
  • show zone_recycle garbage
  • show zone_recycle memory
  • show zone_recycle garbage_check
  • change zone_recycle different_controller
  • change block_manager io_performance
  • show block_manager write_size
  • ccdb.sh
  • show block_manager disk_pool_quota
  • show block_manager emergency
  • change block_manager emergency
  • show mds transform_info
  • scan lun_scrub general
  • show metadata info
  • scan lun_scrub general
  • create upgrade session
  • minisystem
  • show mds transform_info
  • show zone_rebuild info
  • show zone_rebuild io
  • show zone_recycle garbage
  • show zone_recycle info
  • show zone_recycle mgmt
  • show zone_rebuild mgmt
  • change zone_recycle different_controller
  • show space global_config
  • show metadata info
  • show zone_recycle info
  • import kms key
  • scan lun_scrub general
  • show zone_recycle parallel
  • show zone_recycle info
  • show zone_recycle garbage
  • show block_manager write_size
  • change zone_recycle different_controller
  • show zone_rebuild info
  • change block_manager emergency
  • show zone_rebuild mgmt
  • show block_manager disk_mem_info
  • change port enabled
  • show dop pool_view
  • show zone_recycle parallel
  • show qos client_obj
  • show sdparam
  • show space global_config
  • show qos concurrency_obj
  • show qos queue_info
  • rephc showcgruncnt
  • rephc queryldbpair
  • cleardb
  • logzonefreelogbylogid.sh
  • import configuration_data
  • change disk factory_reset
  • change controllers_expansion cancel
  • ccdb.sh
  • cache.sh
  • import configuration_data
  • delete license
  • import configuration_data
  • change space global_config
  • show space global_config
  • show qos queue_info
  • show space global_config

Issue 05 (2017-11-10)

This is the fifth official release.

Added commands:

  • lun showlbainfo
  • show zone_rebuild proc_check
  • show zone_rebuild stripe_num
  • show zone_rebuild service_status
  • change zone_rebuild stripe_num
  • change zone_rebuild service_status
  • show zone_rebuild grain
  • change zone_rebuild grain
  • show zone_recycle ckg_garbage
  • show zone_recycle garbage_check
  • change zone_recycle status
  • change zone_recycle different_controller
  • change zone_recycle prior_list
  • change zone_recycle self_balance
  • show zone_recycle memory
  • show zone_recycle doing_ckg
  • show zone_recycle wait_ckg
  • change zone_recycle ckg_config
  • change zone_recycle water
  • change zone_recycle force_ckg
  • change zone_recycle verify_switch
  • change backend_link slow_link_detect_policy
  • show backend_link slow_link_detect_policy
  • alarm sendalarm
  • getremotedir
  • getremotefile
  • clear zoneio statistics
  • show pool_manager action_count
  • show pool_manager root_resource_volume_count
  • show pool_manager message
  • show pool_manager resource_volume
  • show pool_manager logic_pool_capacity
  • show pool_manager key_value_store
  • show pool_manager logic_pool
  • show pool_manager disk_pool
  • show pool flow
  • change pool config
  • show pool stats
  • change pool stats
  • show pool config
  • show disk_mgr disk_list
  • show disk_mgr disk
  • show disk_mgr event_step
  • show disk_mgr event
  • show cache blocked_page
  • show lun_cache no_mirror_lun
  • show zone_public disk_block_num
  • show disk_reliability_policy slow_disk_detect
  • change disk_reliability_policy slow_disk_detect
  • show dop io_counter
  • show dop kvs_view
  • show dop partition_view
  • show dop memory_counter
  • show dop concur_info
  • show dop pool_view
  • show ddp bucket_info
  • show ddp address
  • show ddp io_counter
  • show ddp data_fingerprint
  • show ddp info
  • show mdc pool_view
  • show mdc kvs_view
  • show mdc partition_view
  • show kvs kv_map
  • show kvs pool_capacity
  • show kvs kvm_info
  • show kvs kvs_info
  • show kvs count
  • show kvs volume_capacity
  • context show all
  • context showcnt
  • tf show scheduler all
  • iod tp show
  • change iod switch
  • iod waittrace show
  • iod show top
  • iod show timer
  • iod show maxtime all
  • iod show thread rt
  • show iod stat_switch
  • iod show queue pricnt
  • show qos policy_obj
  • cgroup_manage.sh
  • show qos io_class_timerecord
  • show dlm zone
  • show dlm timestat
  • show dlm mempool
  • show dlm directory_task
  • show dlm resource_attribute
  • change dlm zone
  • show dlm directory_history_event
  • show dlm startwork
  • change dlm resource_attribute
  • change protocol global_config
  • show protocol global_config
  • show logzone_area status
  • change dif repair_type
  • show dif repair_type
  • change disk_nvme_feature general
  • show disk_nvme_feature general
  • reset disk_nvme_feature general
  • rephc queryarrayinfo
  • rephc queryisoinfo
  • upgrade_atom
  • rephc showrpctask
  • rephc showioerrfilterlist
  • change pool_manager ckg_verify_task
  • create disk_domain*
  • show zone_recycle info
  • show zone_recycle garbage
  • change remote_device transport_optimize
  • sddebug equiptest upgradefw
  • sddebug equiptest startiotest
  • sddebug equipsetskipswitch 1
  • sddebug equipsetskipswitch 0
  • sddebug equiptest show
  • sddebug equiptest checksmart 1
  • sddebug showdev
  • ld showlds
  • sddebug equiptest stopiotest
  • sddebug showframe
  • show block_manager disk_object
  • show block_manager pending_list
  • show zone_recycle mgmt
  • show zone_rebuild mgmt
  • show zone_rebuild info
  • show zone_rebuild io
  • show zone_recycle io
  • show zone_recycle perform
  • show task_mgr step
  • show pool_manager ckg_verify_task
  • change loopback test
  • show loopback test
  • settaskswitch.sh
  • change system pool_config
  • show system pool_config
  • os_clean_ipconfig.sh
  • logzone show ndisk
  • logzone getlogByLogId
  • delete quorum_server db
  • delete quorum_server_link db
  • show uck recvque
  • show uck process_info
  • show uck msg_info
  • logzone show limitQ
  • logzone show peerinfo
  • logzone getlogByKeyWithVnode
  • logzone batchGetlogByKeyWithVnode
  • logzone batchHandleLogByKey
  • change odx job_information
  • show odx job_information
  • rebuild dynamic_database
  • change zone_recycle parallel
  • iod cpuusage show
  • change iod waittrace
  • show zone_recycle list
  • show zone_recycle bandwidth

Modified commands:

  • change iotrace switch
  • logzone show retrymgr
  • change snmp status
  • change disk_domain clear_disk
  • change port enabled
  • change lun_fault_enable
  • help
  • logzone show hangmgr
  • ccdb.sh
  • change lun_cache refresh
  • scsi show tpgstatus
  • rephc showcgcfg
  • rephc showcgruncnt
  • rephc showAllCgLockInfo
  • rephc querydomainarbLink
  • rephc querydomain
  • rephc querypair
  • rephc querydbpair
  • rephc queryldbpair
  • clear configuration_data
  • rim showio
  • bgr showjobinfo
  • ioctrl showio
  • change odx odx_enabled
  • show qos priority_queue
  • showdiskinfo
  • sshtoremote
  • change disk dif_error_stat
  • show writecache_emergency status
  • change writecache_emergency status
  • change space global_config
  • sys.sh
  • create upgrade session
  • omm show_status
  • initlocalpasswd
  • show metadata repair_info
  • change metadata repair
  • change cache recordio
  • change cache concurrent
  • change cache load_info
  • cmm.sh
  • ncache show obj
  • volume rcy
  • show driver queuedepth
  • clear mapping_db_object
  • show zone_public count
  • show zone_public ckg_num
  • show zone_public ck_base_info
  • show zone_public ckg_id_list
  • show zone_public ck_tail
  • show zone_public resource_volume_object_count
  • show zone_public datazone_reference
  • show zone_public ckg_block
  • show zone_public ckg_time_stamp
  • show zone_public allocator_count
  • show zone_public allocator_idle_ckgs
  • show zone_public capacity
  • show zone_public free_grain_info
  • show zone_public ckg_info
  • show zone_public ck_head
  • show zone_public free_list
  • show zone_public allocator_object
  • show zone_public task
  • show zone_public zone_object
  • show zone_public grain_address_base_info
  • show zoneio step
  • show zoneio write_context
  • show zoneio write_ckg
  • clear zoneio inconsistent
  • show zoneio inconsistent
  • show zoneio recycle_ckg
  • show zoneio size
  • show zoneio wait_full_ckg
  • show zoneio count
  • show logcache io
  • show logcache config
  • show logcache info
  • show writecache step
  • show writecache info
  • show writecache count
  • snap showdbinfo
  • snap showerrtask
  • delete snapshot_dcl
  • delete snapshot_rsstype
  • delete snapshot_db
  • snap showerraction
  • snap showctrl
  • show space global_config
  • show lun_fault_enable
  • spacebcpy showcounter
  • show mds object
  • show mds get_put_count
  • change mds time_trace
  • show zone_rebuild proc_check
  • show zone_recycle ckg_garbage
  • show zone_recycle garbage_check
  • change zone_recycle status
  • change zone_recycle different_controller
  • change zone_recycle prior_list
  • change zone_recycle self_balance
  • show zone_recycle memory
  • show zone_recycle doing_ckg
  • show zone_recycle wait_ckg
  • change zone_recycle ckg_config
  • change zone_recycle water
  • change zone_recycle force_ckg
  • change lun_possessed general
  • change lun_cache force_destage
  • sshtoremoteExt
  • change iotrace switch
  • show metadata repair_info
  • change metadata repair
  • getremotefile
  • show pool_manager resource_volume
  • show pool_manager logic_pool_capacity
  • show pool_manager key_value_store
  • show pool_manager logic_pool
  • show pool_manager disk_pool
  • show pool flow
  • change pool config
  • change pool stats
  • show zone_public disk_block_num
  • show qos policy_obj
  • show qos policy_obj
  • delete snapshot_db
  • rephc querydbpair
  • rephc queryldbpair
  • change mds time_trace
  • show lun_fault_enable
  • change zone_recycle water
  • change zone_recycle self_balance
  • show zone_rebuild proc_check
  • show lun_fault_enable
  • create disk_domain*
  • create disk_domain*
  • show space global_config
  • show zone_recycle garbage
  • sys.sh
  • change disk dif_error_stat
  • show pool_manager ckg_verify_task
  • change system pool_config
  • change odx job_information
  • change zone_recycle parallel
  • change zone_recycle different_controller
  • change zone_recycle prior_list
  • change zone_recycle self_balance
  • change zone_recycle water
  • change zone_recycle water
  • change zone_recycle prior_list

Deleted commands:

  • drveth getmtu
  • drveth showports
  • drveth showsfginfo
  • rm showlunrwrightinfo
  • change system cache
  • show system external_tlv_channel
  • change system external_tlv_channel
  • delete disk_domain disk
  • debug_usr
  • ld show vblk

Issue 04 (2017-09-11)

This is the fourth official release.

Added commands:

  • change port fc_long_dis_perf
  • show port fc_long_dis_perf
  • change backend_link slow_link_detect_policy
  • show backend_link slow_link_detect_policy
  • change disk_reliability_policy slow_disk_detect
  • show disk_reliability_policy slow_disk_detect
  • change iod waittrace
  • change zone_recycle verify_switch
  • change zone_rebuild grain
  • change hyper_metro_pair write_mode
  • rephc showstartinfo
  • rephc showPairLockInfo
  • rephc showAllPairLockInfo
  • rep showlastfailtrace
  • show hyper_metro_pair write_mode
  • rephc showlicense
  • rephc showWaitSelfHealevent
  • rep showcall
  • rephc showalltask
  • rep showtrace
  • change hyper_metro_pair link_status
  • delete hyper_metro_pair log
  • rephc querypair
  • delete hyper_metro_pair rsstype
  • delete hyper_metro_pair dcl
  • rephc showluntopair
  • rephc showspec
  • rephc querydbpair
  • rephc queryldbpair
  • change hyper_metro_pair isolation_para
  • delete hyper_metro_pair db
  • change hyper_metro_consistency_group link_status
  • remove hyper_metro_consistency_group member
  • show hyper_metro_consistency_group config
  • clear hyper_metro_consistency_group db
  • rephc showcgruncnt
  • rephc showcgcfg
  • rephc showCgInt
  • rephc showAllCgLockInfo
  • rephc showCgLockInfo
  • hdm show logpage
  • getremotefile
  • change cache worker_statistic
  • show disk dif_error_stat
  • change disk dif_error_stat
  • iod waittrace show
  • change cache load_info
  • iod show timer
  • iod tp show
  • context show all
  • context showcnt
  • tf show scheduler all
  • arb showtrace
  • delete quorum_server_link db
  • arb showall
  • delete quorum_server db
  • os deldefaultip
  • os switchnet
  • change lun_work_controller enabled
  • show lun_work_controller enabled
  • os initibcprivatekey
  • os activeibcprivatekey
  • delete hyper_metro_domain db
  • rephc querydomainarbLink
  • rephc querydomainarb
  • rephc querydomain
  • rim showbusyio
  • bgr showbusyio
  • bgr showevent
  • pair showevent
  • pair showbusyio
  • pair showbadio
  • show writecache_emergency status
  • change writecache_emergency status
  • pair showerrorio
  • pair showtimeoutio
  • bgr showerrorio
  • bgr showtimeoutio
  • bgr showcounter
  • rim showerrorio
  • rim showtimeoutio
  • dcl showdclid
  • dcl showdclinfo
  • change zone_recycle force_ckg
  • change cache recordio
  • show zone_recycle wait_ckg
  • show zone_recycle doing_ckg
  • show driver queuedepth
  • change driver queuedepth
  • show pool mixed_disk
  • change pool mixed_disk
  • show zone_rebuild service_status
  • show zone_rebuild grain
  • show zone_rebuild stripe_num
  • change ftds statistics_period
  • show zone_recycle ckg_garbage
  • show zone_recycle defrag_parallel
  • show odx job_information
  • change odx job_information
  • sys showfailedflowtrace
  • sys showfailedtrace
  • change zone_rebuild stripe_num
  • reset disk_nvme_feature general
  • show disk_nvme_feature general
  • change disk_nvme_feature general
  • mm showcopy
  • rm showcopyjobnum
  • sshtoremoteExt
  • getremotedir
  • volume showctrl
  • show pool_manager ckg_verify_task
  • change private_device proportion
  • showversion*
  • change metadata repair
  • switch
  • rebootsystem
  • bbu
  • bootfromnet
  • show zone_recycle info
  • show mds log_evict
  • show mds time_point
  • show mds object
  • show mds ht_quota
  • show mds time_trace
  • show mds get_put_count
  • show mds instance_log
  • show mds map_info
  • show mds all_instance
  • show mds spec_info
  • show mds meta_instance
  • change zone_rebuild service_status
  • show noma rtt_jitter
  • change noma rtt_jitter
  • setpwronpausestage.sh
  • reboot expansion_module
  • lun checklunmetamirrorflag
  • show zone_recycle garbage
  • change lun_fault_page recover
  • change lun_fault_enable
  • lun showlbainfo
  • iod cpuusage show
  • change protocol global_config
  • show protocol global_config
  • scsi showaluartpi
  • scsi showaluainfo
  • rm showpairctrlinfo
  • clmapt showlock
  • clmapt showhistory

Modified commands:

  • show ccdb general
  • drvunf showdetail
  • drvunf showversion
  • drvfc showtsdksrc
  • drvfc showsfpinfo
  • drvfc showportinfo
  • drvfc showxchg
  • bgr showalljobnumber
  • bgr showbgrinfo
  • pair showqueuebufinfo
  • pair showqueueinfo
  • pair showqueuelistinfo
  • upgradesystem
  • logzone show bitmap
  • change disk factory_reset
  • cliset -d bootfromnet
  • fwdl
  • showcpld
  • reboot
  • ai
  • overtime
  • qlog
  • gf
  • rsensor
  • getkerlog
  • show system maintenance_ip
  • menu
  • showversion
  • showfan
  • showphy
  • phyctl
  • is
  • dq
  • switch mode
  • ld show userate
  • change disk diskin
  • drvsascbb readreg
  • drvsascbb getroutelist
  • drvsascbb showdevinfo
  • change upgrade flow
  • show upgrade status
  • logzone show lba
  • logzone batchGetlogWithVnode
  • logzone batchGetLog
  • logzone getLog
  • om_show_omm_info.sh
  • pair showobjs
  • change fdsa check_item_switch
  • cliset -d setpoweron
  • cliget -d bbuinfo
  • cliget -d version
  • cliget -d sensorinfo
  • cliget -d i2cread
  • cliget -d boardwarn
  • cliget -d boardchip
  • cliget -d boardalarm
  • cliget -d powerevent -v
  • cliget -d ledinfo
  • cliset -d setmaxtimes -v
  • allalarm
  • qerr
  • reset
  • cliset -d setnumaoff
  • drvsascbb getfwinfo
  • drvsascbb showrsc
  • cliset -d cpldreg -v
  • cliset -d cpldbit -v
  • cliset -t common -d
  • cliget -f printbios
  • cliget -d cpldbit -v
  • cliget -d fancellinfo
  • cliset -t fan -d
  • cliset -d bmcreset
  • show dha servicestatus
  • ld show dp
  • sio show deviostat
  • hdm show diagrecord
  • hdm show diskfwconf
  • change disk sn
  • show disk unplug
  • cliset -d setpwdcount -v
  • cliget -d powerinfo
  • cliset -d setlocktimes -v
  • cliget -d powersupply -v
  • cliset -d rebootsystem
  • maint_debug_cli
  • cliget -d cpldreg -v
  • cliget -t common -d
  • ioperf show obj-map
  • bgr showjobinfo
  • dcl showdclcap
  • dcl showerrorio
  • dcl showiterinfo
  • dcl showrwlockinfo
  • dcl showtimeoutio
  • ioctrl showio
  • dcl showtfjobinfo
  • show zone_recycle perform
  • show zone_recycle io
  • dcl counter
  • pair showcounter
  • show zoneio size
  • show zoneio recycle_ckg
  • show zoneio wait_full_ckg
  • show zoneio write_ckg
  • show zoneio step
  • show disk_mgr disk
  • show mdc partition_view
  • show configuration_data backup
  • show zone_public datazone_reference
  • drvunf showtgtioprofile
  • change fdsa switch
  • sys.sh
  • show zone_public zone_object
  • show zone_public ck_base_info
  • rim showio
  • change lun_cache force_destage
  • show zone_public count
  • show pool stats
  • change controller offline
  • volume rcy
  • change cache destage_timer
  • show zone_public task
  • show zone_public free_list
  • show zone_public resource_volume_object_count
  • show zone_public ckg_info
  • show zone_public ckg_time_stamp
  • ncache show global
  • switch*
  • change zone_recycle ckg_config
  • change zone_recycle water
  • lun showiocount
  • change system maintenance_ip
  • cliset -d password -v
  • ld show disk
  • change space global_config
  • show space global_config
  • change dha singlemodelconfig
  • change backend_link timeout_repair_switch
  • show dha singlemodelconfig
  • snap showctrl
  • storagepool getbgrrun
  • storagepool showstoragepoolinfo
  • show bgr counter
  • show rim io
  • change rim io_clear
  • show ddp info
  • lun showstepcount
  • showdisk
  • upgrade_ultrapath_flag.sh
  • show writecache step
  • show zoneio write_context
  • show zoneio count
  • show writecache info
  • show writecache count
  • show logcache config
  • show zone_public capacity
  • show zone_public allocator_count
  • show zone_public ckg_block
  • show zone_public allocator_idle_ckgs
  • show zone_public grain_address_base_info
  • show zone_public ck_tail
  • show zone_public free_grain_info
  • show zone_public ckg_id_list
  • show zone_public ck_head
  • show zone_public ckg_num
  • xrb iodelaydis
  • ncache show obj
  • ncache show chunk
  • change pool stats
  • os generatesshkey
  • drveth shownaeinfo
  • os passwdrem
  • os setmaxfailcnt
  • os userquery
  • os usermod
  • os useradd
  • os showseinfo
  • os passwdmod
  • dsw exportlog
  • drveth showmactable
  • os changeplaneid
  • os showcpld
  • os showstatus
  • os setforbidlogintime
  • dsw showfault
  • os showipconfig
  • os changebootfromtftp
  • os passwdmax
  • os userdel
  • drvpcie showdswinfo
  • dsw showalarm
  • drveth showvlan
  • show sdparam
  • show zone_recycle mgmt
  • show zone_recycle garbage_check
  • clear zoneio inconsistent
  • upgrade_clearflag.sh
  • omm show_status
  • os passwdmin
  • drvisi showperf
  • change cache concurrent
  • show metadata repair_info
  • show disk schedule_work_status
  • change disk schedule_work_status
  • change backend_link slow_link_detect_policy
  • show qos node_flow_ctrl
  • show qos priority_io_stat
  • change cluster master
  • change disk_reliability_policy slow_disk_detect
  • show qos queue_info
  • xnet ping
  • xnet showstat
  • change zone_recycle verify_switch
  • change dha policy
  • change zone_rebuild grain
  • ccdb.sh
  • show system force_write_back
  • change hyper_metro_pair write_mode
  • rep showcall
  • rep showtrace
  • delete hyper_metro_pair log
  • rephc querypair
  • delete hyper_metro_pair rsstype
  • rephc showspec
  • rephc querydbpair
  • rephc queryldbpair
  • rephc showcgruncnt
  • rephc showcgcfg
  • rephc showCgInt
  • show zone_public ck_head
  • change system maintenance_ip
  • show zone_public grain_address_base_info
  • show zone_public free_grain_info
  • show zone_public free_list
  • show zone_public ckg_info
  • show zone_public zone_object
  • show writecache info
  • show writecache count
  • change disk dif_error_stat
  • change cache load_info
  • show metadata repair_info
  • change zone_recycle ckg_config
  • change cache concurrent
  • os deldefaultip
  • os switchnet
  • os usermod
  • show rim io
  • omm show_status
  • os showipconfig
  • os initibcprivatekey
  • os activeibcprivatekey
  • rephc querydomain
  • rim showbusyio
  • bgr showevent
  • pair showqueueinfo
  • show ccdb general
  • logzone show bitmap
  • logzone batchGetLog
  • bgr showbgrinfo
  • rim showio
  • show rim io
  • logzone getLog
  • logzone show lba
  • dcl showiterinfo
  • rep showtrace
  • rephc querypair
  • rephc showspec
  • change cache recordio
  • show driver queuedepth
  • change driver queuedepth
  • change ftds statistics_period
  • change ftds statistics_period
  • rfru
  • showpower
  • reset disk_nvme_feature general
  • show disk_nvme_feature general
  • change disk_nvme_feature general
  • show disk_nvme_feature general
  • reset disk_nvme_feature general
  • change disk_nvme_feature general
  • cliget -d powerevent -v
  • cliset -d bootfromnet
  • cliget -d powersupply -v
  • cliget -d sensorinfo
  • cliset -d setpwdcount -v
  • cliget -d version
  • change private_device proportion
  • change metadata repair
  • reset
  • allalarm
  • fwdl
  • qerr
  • overtime
  • rfru
  • getkerlog
  • is
  • phyctl
  • qlog
  • showphy
  • showversion
  • rsensor
  • showdisk
  • showcpld
  • showfan
  • showpower
  • gf
  • ai
  • menu
  • reboot
  • dq
  • switch
  • rebootsystem
  • bbu
  • bootfromnet
  • show mds object
  • change ftds statistics_period
  • show mds object
  • drvsascbb getroutelist
  • change metadata repair
  • change dha singlemodelconfig
  • show dha singlemodelconfig
  • change cluster master
  • change controller offline

Issue 03 (2017-06-30)

This is the third official release.

Added commands:

  • change iod waittrace
  • change zone_recycle verify_switch
  • change zone_rebuild grain
  • change ftds statistics_period
  • change hyper_metro_pair write_mode
  • rephc showstartinfo
  • rephc showPairLockInfo
  • rephc showAllPairLockInfo
  • rep showlastfailtrace
  • show hyper_metro_pair write_mode
  • rephc showlicense
  • rephc showWaitSelfHealevent
  • rep showcall
  • rephc showalltask
  • rep showtrace
  • change hyper_metro_pair link_status
  • delete hyper_metro_pair log
  • rephc querypair
  • delete hyper_metro_pair rsstype
  • delete hyper_metro_pair dcl
  • rephc showluntopair
  • rephc showspec
  • rephc querydbpair
  • rephc queryldbpair
  • change hyper_metro_pair isolation_para
  • delete hyper_metro_pair db
  • change hyper_metro_consistency_group link_status
  • remove hyper_metro_consistency_group member
  • show hyper_metro_consistency_group config
  • clear hyper_metro_consistency_group db
  • rephc showcgruncnt
  • rephc showcgcfg
  • rephc showCgInt
  • rephc showAllCgLockInfo
  • rephc showCgLockInfo
  • show driver queuedepth
  • change driver queuedepth
  • getremotedir
  • getremotefile
  • change cache worker_statistic
  • iod waittrace show
  • change cache load_info
  • iod show timer
  • iod tp show
  • context show all
  • context showcnt
  • tf show scheduler all
  • arb showtrace
  • delete quorum_server_link db
  • arb showall
  • delete quorum_server db
  • os deldefaultip
  • os switchnet
  • change lun_work_controller enabled
  • show lun_work_controller enabled
  • os initibcprivatekey
  • os activeibcprivatekey
  • delete hyper_metro_domain db
  • rephc querydomainarbLink
  • rephc querydomainarb
  • rephc querydomain
  • rim showbusyio
  • bgr showbusyio
  • bgr showevent
  • pair showevent
  • pair showbusyio
  • pair showbadio
  • show writecache_emergency status
  • change writecache_emergency status
  • pair showerrorio
  • pair showtimeoutio
  • bgr showerrorio
  • bgr showtimeoutio
  • bgr showcounter
  • rim showerrorio
  • rim showtimeoutio
  • dcl showdclid
  • dcl showdclinfo
  • change cache recordio

Modified commands:

  • show ccdb general
  • drvunf showversion
  • drvfc showtsdksrc
  • drvfc showsfpinfo
  • drvfc showxchg
  • bgr showalljobnumber
  • bgr showbgrinfo
  • pair showqueuebufinfo
  • pair showqueueinfo
  • pair showqueuelistinfo
  • logzone show bitmap
  • change disk factory_reset
  • logzone show lba
  • logzone batchGetlogWithVnode
  • logzone batchGetLog
  • logzone getLog
  • pair showobjs
  • change fdsa check_item_switch
  • bgr showjobinfo
  • dcl showdclcap
  • dcl showerrorio
  • dcl showiterinfo
  • dcl showrwlockinfo
  • dcl showtimeoutio
  • ioctrl showio
  • dcl showtfjobinfo
  • show zone_recycle perform
  • show zone_recycle io
  • dcl counter
  • pair showcounter
  • show zoneio recycle_ckg
  • show zoneio wait_full_ckg
  • show zoneio write_ckg
  • show zoneio step
  • show mdc partition_view
  • show zone_public datazone_reference
  • drvunf showtgtioprofile
  • change fdsa switch
  • show mds object
  • sys.sh
  • show zone_public zone_object
  • show zone_public ck_base_info
  • rim showio
  • show zone_public count
  • show pool stats
  • change cache destage_timer
  • show zone_public task
  • show zone_public free_list
  • show zone_public resource_volume_object_count
  • show mds log_evict
  • show zone_public ckg_info
  • show zone_public ckg_time_stamp
  • show zone_recycle garbage
  • change zone_recycle ckg_config
  • change zone_recycle water
  • lun showiocount
  • change system maintenance_ip
  • show disk slowthreshold
  • change backend_link timeout_repair_switch
  • volume showctrl
  • snap showctrl
  • storagepool getbgrrun
  • storagepool showstoragepoolinfo
  • show bgr counter
  • show rim io
  • change rim io_clear
  • lun showstepcount
  • show zoneio inconsistent
  • show writecache step
  • show zoneio write_context
  • show zoneio count
  • show writecache info
  • show writecache count
  • show zone_public capacity
  • show zone_public allocator_count
  • show zone_public ckg_block
  • show zone_public grain_address_base_info
  • show zone_public ck_tail
  • show zone_public free_grain_info
  • show zone_public ckg_id_list
  • show zone_public ck_head
  • show zone_public ckg_num
  • xrb iodelaydis
  • sshtoremoteExt
  • change pool stats
  • os usermod
  • os showipconfig
  • show zone_recycle mgmt
  • show zone_recycle info
  • show zone_recycle garbage_check
  • clear zoneio inconsistent
  • omm show_status
  • change cache concurrent
  • show metadata repair_info
  • change metadata repair
  • show qos node_flow_ctrl
  • show qos priority_io_stat
  • show qos queue_info
  • xnet ping
  • xnet showstat
  • change zone_recycle verify_switch
  • change zone_rebuild grain
  • ccdb.sh
  • show system force_write_back
  • change hyper_metro_pair write_mode
  • rep showcall
  • rep showtrace
  • rephc querypair
  • delete hyper_metro_pair rsstype
  • rephc showspec
  • rephc querydbpair
  • rephc queryldbpair
  • rephc showcgruncnt
  • rephc showcgcfg
  • rephc showCgInt
  • show driver queuedepth
  • change driver queuedepth
  • change cache load_info

Issue 02 (2017-05-30)

This is the second official release.

Added product models for Dorado5000.

Issue 01 (2017-03-30)

This is the first official release.

Traducción
Descargar
Updated: 2018-09-13

N.° del documento: EDOC1000141823

Vistas:71288

Descargas: 309

Average rating:
This Document Applies to these Products
Documentos relacionados
Share
Anterior Siguiente