Command Reference

OceanStor Dorado V3 Series V300R001

"This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."

Rate and give feedback :

Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).

About This Document

Purpose

Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.

This document is applicable to the following product models.

Product Series	Product Model
OceanStor Dorado V3 series	Dorado5000 V3
	Dorado6000 V3
	Dorado18000 V3

Intended Audience

This document is intended for:

Technical support engineers
Maintenance engineers

Content Conventions

The purchased products, services, and features are stipulated by the commercial contract made between Huawei and the customer. All or partial products, services and features described in this document may not be within the purchased scope or the usage scope. Unless otherwise agreed by the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees, or representations of any kind, either express or implied

As part of an effort to improve and enhance the performance and capabilities of its product line, Huawei Technologies Co., Ltd. from time to time releases revisions of its hardware and software. Therefore, some functions described in this manual may not be supported by all revisions of the software or hardware currently in use. For the most up-to-date information on product features, refer to your product release notes.

If a product does not function as described in this manual, please contact your Huawei Technologies Co., Ltd. technical support.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 09 (2018-08-30)

This is the ninth official release.

Added the description of using the remote SSH to deliver CLI commands to the disk array in chapter 1 "CLI Use Guidance".

Issue 08 (2018-07-15)

This is the eighth official release.

Added commands:

test dns_server general

Modified commands:

change isns server_ip
change snmp port
create mapping_view
show remote_lun general
show performance system
add bond_port ipv6_route
delete bond_port
change devicemanager tls
change system name
add mapping_view host_group
show performance snapshot
show performance smartqos_policy
show consistency_group general
show performance remote_replication
show performance consistency_group
show port fibre_module
show dns_server general
change dns_server general
change notification syslog
show remote_replication general
change notification sms
remove notification receiver
change alarm_object_mask
create remote_replication unified
add mapping_view lun_group
show performance controller
show performance port
change cli
change mapping_view
show performance ib_port
show port bit_error
show performance bond_port
show performance lun
add bond_port ipv4_route
change snmp usm
change system write_policy
add port ipv6_route
add port ipv4_route
create quorum_server general
create consistency_group asynchronization
show performance disk_domain
show disk_domain available_capacity
show performance elink
show isns server_ip
show remote_device general
show remote_device link
show remote_replication unified
change system location
show port initiator
show performance link
show notification syslog
change notification trap
export running_data
create remote_replication general
change disk_domain general
show initiator
show performance host
show performance storage_pool
create storage_pool
show storage_pool general
show performance disk
create remote_device general
change smtp_server config
change lun
change quorum_server general
show port general
change initiator
show performance lun_priority

Issue 07 (2018-04-03)

This is the seventh official release.

Added commands:

delete lun_copy
change lun_copy general
create lun_copy local
change lun_copy session
show lun_copy general
delete snapshot_schedule
show snapshot_schedule lun
remove snapshot_schedule lun
change snapshot_schedule general
show snapshot_schedule general
create snapshot_schedule general
change snapshot_schedule enabled
add snapshot_schedule lun
create failover_group general
add failover_group bond_port
add failover_group eth_port
add failover_group fc_port
remove failover_group fc_port
remove failover_group bond_port
remove failover_group eth_port
delete failover_group general
change failover_group general
show failover_group general
show failover_group count
show failover_group member
show failover_group fc_port
change snapshot description

Modified commands:

change iostat policy
delete snmp usm
exit
show mm_user general
show storage_pool general
delete performance file
change snapshot reactivate
show performance storage_pool
change system time
change system timezone
show alarm
test call_home service
change snapshot deactivate
show hyper_metro_domain general
create lun_group
change initiator
change ib_initiator general
create initiator iscsi
create initiator fc
create ib_initiator general
change snapshot name
change port fc
create snapshot general
show snapshot available_snapshot
show ib_initiator general
change snapshot capacity
change snapshot io_priority
change storage_pool general
change remote_support general
add quorum_server_link general
show disk_domain general
create disk_domain
create hyper_metro_pair unified
change hyper_metro_pair general
change hyper_metro_consistency_group general
create remote_device general
create hyper_metro_consistency_group general
change lun
show lun_clone available_snapshot
delete lun_copy
change lun_copy general
create lun_copy local
change lun_copy session
show lun_copy general
show initiator
change quorum_server general
create lun
show port general
change disk_domain general
show system dst
show performance file
show bond_port
show performance host
change snapshot restore
change snmp version
change consistency_group synchronize
change remote_device link
add remote_device link iscsi
show performance disk
show event
show diagnose_code
change call_home general
change disk erase
create storage_pool
show snapshot general
show lun general
remove snapshot_schedule lun
change snapshot_schedule general
show snapshot_schedule general
create snapshot_schedule general
change snapshot description

Issue 06 (2017-12-30)

This is the sixth official release.

Added commands:

show lun_clone general
change lun_clone split
create lun_clone general
show lun_clone available_lun
show replication_connection_status general
show lun_clone available_snapshot

Modified commands:

show lun_migration count
show host_group mapping_view
show host_group general
show host_group host
show port_group mapping_view
show port_group general
show mapping_view host_group
show mapping_view lun_group
show mapping_view port_group
show iscsi initiator_name
show iscsi target_name
show snmp context_name
show isns server_ip
show system timezone
show system media_scan
poweroff interface_module
poweron interface_module
show port ip
show port route
show fan
show bbu general
show enclosure
show disk precopy
show iscsi target
change remote_device link
add remote_device link iscsi
show remote_device general
show power_supply
show system manufactory
show mapping_view general
show iscsi initiator_name_v2
show system general
show disk_domain lun
change disk_domain general
add disk_domain disk
show system dst
show notification email
show notification sms
show remote_lun path
show snmp port
change snmp version
show event
show disk_domain task
create alarm test
show performance statistic_enabled
show performance strategy
change performance strategy
show performance restore
change remote_device general
show remote_device elink
show bond_port
show performance elink
show performance lun_priority
change system location
show upgrade package
show cache read_cache
show version all
change smtp_server config
import license
show route general
show ib_port general
delete notification trap
change hyper_metro_consistency_group pause
change hyper_metro_pair pause
show disk in_domain
change event_restore enabled
show diagnose_code
show event_config
show event_restore
show performance file
show performance host
show performance link
change performance restore
show disk_domain available_capacity
add notification trap
change notification trap
export license
show user
show host reachable
change safe_strategy
show remote_replication unified
change disk erase
export kms key
show kmc general
show certificate general
change hyper_metro_pair general
show quorum_server general
show hyper_metro_consistency_group general
export performance file
export running_data
show remote_support general
show notification syslog
export configuration_data
change event_config
show notification trap
show user_mode enabled
change user_mode enabled
change notification email_extend
change event_restore address
change ntp_server config
change system ntp
import certificate
show performance disk
show expansion_module
show lun_group mapping_view
show smartqos_policy general
show interface_module
show controller general
import ssl_certificate
change security_rule enabled
export certificate
change consistency_group synchronize
change quorum_server general
change lun_workload_type general
change disk_domain rekey
show host general
show smartqos_policy hierarchical
show smartqos_policy lun
show smartqos_policy snapshot
change snapshot speed
import crl file
show remote_device link
delete disk_domain
change snapshot restore
show disk_domain general
show lun_takeover general
create remote_replication general
create hyper_metro_pair unified
create hyper_metro_consistency_group general
change hyper_metro_consistency_group general
show snmp usm
show initiator
show disk general
change snmp community
change lun
change call_home general
change call_home authenticate
export event
create disk_domain
delete file
show file export_path
show file notification
show file package_result
import ssh_host_key_file
change user_mode current_mode
show port general
create port_group
remove port_group port
show port_group port
create remote_device general
show port initiator
show performance disk_domain
create snapshot_schedule general
change snapshot_schedule general
show lun general
show snapshot general
show disk_domain lun
change disk_domain general
add disk_domain disk
show disk_domain task
show disk_domain available_capacity
change disk_domain rekey
delete disk_domain
export cli history
create lun
create storage_pool
change call_home general
show file notification
show certificate general
export running_data
add remote_device link iscsi
change remote_device link
change lun
show lun_clone general
change lun_clone split
create lun_clone general
change quorum_server general
import certificate
show performance disk_domain
show lun general
change performance strategy
export configuration_data
export license
export event
import license
export performance file
show upgrade package
change lun_clone split
export cli history
show controller general
import ssl_certificate
show port general
show ib_port general
import certificate
export certificate
import crl file
show port initiator
export kms key
create storage_pool
show mapping_view general
show controller general
add disk_domain disk
show system general
show disk general
show performance restore
show upgrade package
create storage_pool
show user
show disk in_domain
show lun general
show remote_replication unified
show quorum_server general
show event_restore
change snmp community
change event_restore address
show controller general
show remote_device general
show remote_device link
show performance lun_priority
show lun general
export cli history
show disk in_domain
export configuration_data
export performance file
export running_data
change performance restore
change performance strategy
change smtp_server config
change notification email_extend
change call_home general
create remote_replication general

Deleted commands:

delete snapshot_schedule
remove snapshot_schedule lun
change snapshot_schedule enabled
show snapshot_schedule general
add snapshot_schedule lun
show snapshot_schedule lun
create snapshot_schedule general
change snapshot_schedule general

Issue 05 (2017-11-10)

This is the fifth official release.

Added commands:

change system write_policy
show system write_policy
show upgrade redundant_link
change devicemanager ciphersuite
show quorum_server_link general
delete quorum_server general
add quorum_server_link general
remove quorum_server_link general
create quorum_server general

Modified commands:

show port_group port
show port initiator
show snmp safe_strategy
add remote_device link fc
change lun_migration
show remote_device link
show snmp version
change snmp community
remove bond_port ipv4_address
create remote_device general
create lun_migration
create port_group
show snmp usm
change snmp usm
add snmp usm
show disk general
create consistency_group synchronization
change consistency_group general
create consistency_group asynchronization
change remote_replication general
change call_home general
show port general
change hyper_metro_consistency_group general
create hyper_metro_consistency_group general
create hyper_metro_pair unified
show disk general
change remote_support general
change call_home authenticate
show file package_result
delete file
change snapshot capacity
show ib_initiator general
show initiator
create disk_domain
import ssh_host_key_file
show file notification
change user_mode current_mode
show file export_path
export event
create remote_replication general
remove port_group port
add smartqos_policy hierarchical
change snapshot io_priority
show crl general
add port ipv4_route
add port ipv6_route
change storage_pool general
change lun
show user_ssh_auth_info general
change lun
create lun_takeover general
show snapshot available_snapshot
create snapshot general
change snapshot capacity
change snapshot cancel_restore
create consistency_group synchronization
create consistency_group asynchronization
change consistency_group general
show port initiator
change snapshot cancel_restore
change system write_policy
change snapshot capacity
change snapshot io_priority
change consistency_group general

Deleted commands:

show system write_through_policy
export call_home_collector information_file
change system write_through_policy

Issue 04 (2017-09-11)

This is the fourth official release.

Added commands:

change devicemanager ciphersuite
show initiator
change initiator
create initiator iscsi
create initiator fc
create ib_initiator general
show ib_port general
show ib_initiator general
delete hyper_metro_pair general
change hyper_metro_pair synchronize
create hyper_metro_pair unified
change hyper_metro_pair start
change hyper_metro_pair priority
change hyper_metro_pair general
change hyper_metro_pair pause
create hyper_metro_pair verification_session
show hyper_metro_pair general
show hyper_metro_consistency_group pair
create hyper_metro_consistency_group verification_session
show hyper_metro_consistency_group general
delete hyper_metro_consistency_group
change hyper_metro_consistency_group priority
remove hyper_metro_consistency_group pair
change hyper_metro_consistency_group synchronize
change hyper_metro_consistency_group pause
add hyper_metro_consistency_group pair
change hyper_metro_consistency_group start
create hyper_metro_consistency_group general
change hyper_metro_consistency_group general
change ib_initiator general
change host
add kmc test
show kmc general
add kmc general
delete kmc general
delete white_list
show white_list
change white_list
export tls_cert
show tls_cert
delete server_ip
import tls_cert
show server_ip
show server_info
add server_ip
add white_list
create quorum_server general
show quorum_server general
remove quorum_server_link general
add quorum_server_link general
change quorum_server general
show quorum_server_link general
delete quorum_server general
change snapshot restore
create hyper_metro_domain general
delete hyper_metro_domain general
remove hyper_metro_domain quorum_server
add hyper_metro_domain quorum_server
show snapshot general
show snapshot available_snapshot
create user
create disk_domain
show user_mode enabled
change user_mode enabled
show user
show remote_replication general
create lun_takeover general
change user_mode current_mode
change snapshot cancel_restore
change alarm_object_mask
remove notification receiver
add notification receiver
change notification email_extend
change notification email
change notification sms
add host ib_initiator
add host initiator
show enclosure
add consistency_group remote_replication
create remote_replication general
create remote_replication unified
change remote_replication split
create consistency_group asynchronization
create host
change disk_domain rekey
change event_config
remove mapping_view port_group
change system write_policy
show system write_policy
change system write_through_policy
show system write_through_policy
change remote_replication general
swap consistency_group
add lun_group lun
add snmp usm
change snmp usm
show snmp safe_strategy
show port initiator

Modified commands:

change ssd routeswitch
change snmp port
change lun_migration
change alarm_mask
show license
change bond_port ipv6_address
change snapshot deactivate
create lun_migration
show ntp_server general
show system ntp
show cli history
export cli history
change ntp_server config
show snapshot available_lun
add smtp_server general
show notification syslog
show disk health
change disk routine_test
show performance bond_port
show performance port
create remote_device general
import ssl_certificate
show lun_cache general
change system ntp
change notification syslog
show notification trap
change performance threshold
show performance lun
create lun
change user_ssh_auth_info general
show user_ssh_auth_info general
change certificate password
change certificate prewarning_time
show certificate general
export certificate
change bond_port ipv4_address
change interface_module
change port ipv6_address
change port ipv4_address
show disk general
create consistency_group verification_session
change consistency_group general
change disk erase
show port general
show port bit_error
export configuration_data
show lun mapping_view
change controller smartport_work_mode
remove smtp_server general
test smtp_server general
test ntp_server general
add ntp_server general
remove ntp_server general
change user
import certificate
create storage_pool
show controller general
change system management_ip
test ntp_server general
import certificate
export event
show interface_module
show disk_domain general
show security_rule
show initiator
change initiator
create initiator iscsi
create initiator fc
create ib_initiator general
show ib_initiator general
delete hyper_metro_pair general
create hyper_metro_pair unified
show hyper_metro_pair general
show hyper_metro_consistency_group general
show disk general
show port general
change system management_ip
change bond_port ipv6_address
create hyper_metro_pair unified
change ib_initiator general
change host
add kmc test
change user
create hyper_metro_pair unified
show quorum_server general
show quorum_server_link general
create hyper_metro_pair unified
create hyper_metro_pair unified
show hyper_metro_pair general
show cli history
change interface_module
show interface_module
show controller general
change controller smartport_work_mode
show snapshot available_snapshot
create user
show user_ssh_auth_info general
create disk_domain
show remote_replication general
show hyper_metro_pair general
change user_mode current_mode
change notification email_extend
change notification email
change notification sms
show remote_replication general
change initiator
change ib_initiator general
create initiator iscsi
create initiator fc
create ib_initiator general
create remote_replication general
create consistency_group asynchronization
show remote_replication general
change initiator
change ib_initiator general
change disk_domain rekey
create hyper_metro_pair unified
show performance lun

Deleted commands:

show user_mode enabled
change user_mode enabled
change system write_through_policy
show system write_through_policy

Issue 03 (2017-06-30)

This is the third official release.

Added commands:

delete hyper_metro_pair general
change hyper_metro_pair synchronize
create hyper_metro_pair unified
change hyper_metro_pair start
change hyper_metro_pair priority
change hyper_metro_pair general
change hyper_metro_pair pause
create hyper_metro_pair verification_session
show hyper_metro_pair general
show hyper_metro_consistency_group pair
create hyper_metro_consistency_group verification_session
show hyper_metro_consistency_group general
delete hyper_metro_consistency_group
change hyper_metro_consistency_group priority
remove hyper_metro_consistency_group pair
change hyper_metro_consistency_group synchronize
change hyper_metro_consistency_group pause
add hyper_metro_consistency_group pair
change hyper_metro_consistency_group start
create hyper_metro_consistency_group general
change hyper_metro_consistency_group general
import certificate
delete white_list
show white_list
change white_list
export tls_cert
show tls_cert
delete server_ip
import tls_cert
show server_ip
show server_info
add server_ip
add white_list
create quorum_server general
show quorum_server general
remove quorum_server_link general
add quorum_server_link general
change quorum_server general
show quorum_server_link general
delete quorum_server general
create hyper_metro_domain general
delete hyper_metro_domain general
remove hyper_metro_domain quorum_server
add hyper_metro_domain quorum_server
create snapshot general
show snapshot general

Modified commands:

change user_mode current_mode
change snmp port
change lun_migration
create disk_domain
change bond_port ipv6_address
create lun_migration
show ntp_server general
show system ntp
show cli history
export cli history
change ntp_server config
show port general
change remote_replication general
change system ntp
create consistency_group asynchronization
create remote_replication general
show notification trap
change performance threshold
create lun
change bond_port ipv4_address
change interface_module
change port ipv6_address
change port ipv4_address
change port fc
create consistency_group verification_session
change consistency_group general
change disk erase
change notification syslog
add kmc test
export configuration_data
show lun mapping_view
show disk general
change user
show controller general
change system management_ip
export event
show interface_module
change disk_domain rekey
show disk_domain general
show security_rule
create hyper_metro_pair unified
show hyper_metro_pair general
show hyper_metro_consistency_group general
show quorum_server general
show quorum_server_link general

Issue 02 (2017-05-30)

This is the second official release.

Added product models for Dorado5000.

Issue 01 (2017-03-30)

This is the first official release.

Traducción

简体中文

Descargar

Updated: 2018-10-19

N.° del documento: EDOC1000141825

Vistas:55002

Descargas: 284

Average rating:

This Document Applies to these Products

Documentos relacionados

Productos

Soluciones

Por industria

Zona de servicios

Contacto

Documentación y software

Buscar un partner

Pedidos y consultas

Contáctenos

Buscar un partner

Conviértase en partner

Zona de partners

Command Reference

OceanStor Dorado V3 Series V300R001

About This Document

Purpose

Intended Audience

Content Conventions

Change History

Issue 09 (2018-08-30)

Issue 08 (2018-07-15)

Issue 07 (2018-04-03)

Issue 06 (2017-12-30)

Issue 05 (2017-11-10)

Issue 04 (2017-09-11)

Issue 03 (2017-06-30)

Issue 02 (2017-05-30)

Issue 01 (2017-03-30)

Enterprise

Corporate

Consumer

Carrier

AFRICA

LATIN AMERICA

MIDDLE EAST

ASIA PACIFIC

NORTH AMERICA

EUROPE

Productos

Soluciones

Por industria

Zona de servicios

Contacto

Documentación y software

Buscar un partner

Pedidos y consultas

Contáctenos

Buscar un partner

Conviértase en partner

Zona de partners

Command Reference

OceanStor Dorado V3 Series V300R001

About This Document

Purpose

Intended Audience

Content Conventions

Change History

Issue 09 (2018-08-30)

Issue 08 (2018-07-15)

Issue 07 (2018-04-03)

Issue 06 (2017-12-30)

Issue 05 (2017-11-10)

Issue 04 (2017-09-11)

Issue 03 (2017-06-30)

Issue 02 (2017-05-30)

Issue 01 (2017-03-30)