No se encuentran recursos de mapeo en el idioma seleccionado.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>

SCOM Plugin V100R002C20 User Guide 05

Rate and give feedback :
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido. Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales. Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
About This Document

About This Document

Purpose

This guide describes how to install and uninstall the SCOM plugin and monitor Huawei devices.

Intended Audience

This document is intended for:

  • Installation and commissioning engineers
  • Technical support engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 05 (2018-10-17)

Modified Configuring an E9000 Server.

Issue 04 (2018-06-29)

Modified Configuring a Rack Server.

Issue 03 (2017-07-10)

Modified Configuring a Rack Server.

Issue 02 (2017-06-30)

Information about the support for E9000 server monitoring is added.

Issue 01 (2017-06-02)

This issue is the first official release.

Traducción
Descargar
Updated: 2018-10-18

N.° del documento: EDOC1000150016

Vistas:3628

Descargas: 107

Average rating:
This Document Applies to these Products
Documentos relacionados
Share
Anterior Siguiente