Intended Audience

This document is intended for network engineers responsible for CE series switches configuration and management. You should be familiar with basic Ethernet knowledge and have extensive experience in network deployment and management.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Command Conventions

The command conventions that may be found in this document are defined as follows.

Interface Numbering Conventions

Interface numbers used in this manual are examples. In device configuration, use the existing interface numbers on devices.

Security Conventions

• Password setting
  • When configuring a password, the cipher text is recommended. To ensure device security, change the password periodically.
  • When you configure a password in plain text that starts and ends with %^%#......%^%# (the password can be decrypted by the device), the password is displayed in the same manner as the configured one in the configuration file. Do not use this setting.
  • When you configure a password in cipher text, different features cannot use the same cipher-text password. For example, the cipher-text password set for the AAA feature cannot be used for other features.

  • After the system software is downgraded and the switch restarts with the configuration of the higher version, AAA, VTY, serial interface login, and SNMP user passwords become invalid. As a result, users fail to log in to the switch using the passwords and the switch is disconnected from the network management system.

    To address this problem, take the following measures:

    1. If no password is configured for the console port, log in to the device through the console port, and reconfigure AAA and password for users such as VTY and SNMP users. For security purposes, the console port password is recommended.
    2. If a password is configured for login through the console port, the password becomes invalid after the downgrade and you cannot log in to the switch through the console port. Perform the following steps:
       1. Connect to the console port.
       2. Power recycle the device. During the startup, enter Ctrl+B according to the prompt to enter the BIOS menu. The default password is Admin@huawei.com.
       3. Select 7.Modify console password to delete and change the console port password.
       4. Restart the device, log in to the device through the console port, and reconfigure the password for AAA, VTY, or SNMP user.
• Encryption algorithm

  Currently, the device uses the following encryption algorithms: DES, 3DES, AES, DSA, RSA, DH, ECDH, HMAC, SHA1, SHA2, PBKDF2, scrypt, and MD5. The encryption algorithm depends on the applicable scenario. Use the recommended encryption algorithm; otherwise, security defense requirements may be not met.

  • For the symmetrical encryption algorithm, use AES with the key of 256 bits or more.
  • When you need to use an asymmetric cryptography, RSA (2048-bit or longer key) is recommended. In addition, use different key pairs for encryption and signature.
  • For the digital signature, RSA (2048-bit or longer key) or DSA (2048-bit or longer key) is recommended.
  • For key negotiation, DH (2048-bit or longer key) or ECDH (256-bit or longer key) is recommended.
  • For the hash algorithm, use SHA with the key of 256 bits or more.
  • For the HMAC algorithm, use HMAC-SHA2.
  • DES, 3DES, RSA and AES are reversible encryption algorithm. If protocols are used for interconnection, the locally stored password must be reversible.
  • SHA1, SHA2, and MD5 are irreversible encryption algorithm. When configuring a password for local administrator, it is recommended that you use the SHA2 irreversible encryption algorithm.
  • To prevent brute force cracking of the user password, the iteration algorithm is added to the password on the basis of salts. The iteration algorithm uses PBKDF2 or scrypt key export algorithm.
  • The ECB mode has a poor capability of defending against plaintext playback attacks, so ECB is not recommended for password encryption.
  • In SSH2.0, the symmetric cryptography using the CBC mode may undergo the plaintext-recovery attack to cause a data leak. Therefore, the CBC mode is not recommended for SSH2.0.
• Personal data

  Some personal data (such as MAC or IP addresses of terminals) may be obtained or used during operation or fault location of your purchased products, services, features, so you have an obligation to make privacy policies and take measures according to the applicable law of the country to protect personal data.

• The terms mirrored port, port mirroring, traffic mirroring, and mirroring in this manual are mentioned only to describe the product's function of communication error or failure detection, and do not involve collection or processing of any personal information or communication data of users.

Declaration

This manual is only a reference for you to configure your devices. The contents in the manual, such as command line syntax, and command outputs, are based on the device conditions in the lab. The manual provides instructions for general scenarios, but do not cover all usage scenarios of all product models. The contents in the manual may be different from your actual device situations due to the differences in software versions, models, and configuration files. The manual will not list every possible difference. You should configure your devices according to actual situations.

The specifications provided in this manual are tested in lab environment (for example, the tested device has been configured with a certain type of cards or only one protocol is run on the device). Results may differ from the listed specifications when you attempt to obtain the maximum values with multiple functions enabled on the device.

Mappings between Product Software Versions and NMS Versions

The mappings between product software versions and NMS versions are as follows.

Mappings between Product Software Versions and Controller Versions

The mappings between product software versions and Controller versions are as follows.