The CSE management node is deployed on the T8000 first blade.
The built-in deployment tool must be correctly configured to ensure normal communication between the ISM server and CSE nodes.
Step 4 Allocate a new IP address to the switch. The new IP address of the switch must be on the same network segment as that of the management node allocated by a DHCP server.
The IP address of the management node allocated by a DHCP server is on the private network segment. Therefore, the IP address of the switch must on the private network segment.
1. Log in to the switch. Then run the ip addressx.x.x.xy.y.y.y command. x.x.x.x indicates the new IP address of the switch and y.y.y.y indicates the new subnet mask of the switch. The subnet mask of the switch must be consistent with that of the ISM server.
2. Run the quit command.
3. Run the save command to save configurations.
Step 5 Run the /home/cse/clean.sh script on the CSE node that cannot be discovered. Then click Refresh Node and start automatic deployment. Check whether the CSE node can be discovered during the automatic deployment.
l If yes, the fault is removed.
l If no, contact technical support engineers.