When VSM client and server run on the same machine, if pull out the server network cable, may cause the connection between server VSM client and server break at a short time. VSM client page prompt that:
server connection break, trying to connect again...
After wait for about 5 seconds, restore the connection
Please wait for about 5 seconds, VSM client will automatically establish the connection to the server again.
When the client and the server run on the same machine, and the client connect to the server, will select a network adapter as the communication link. When pull out a network cable of the machine, may cause the connection between the client and the server break, because the client maybe use the network cable to connect the network card and the server to communicate.
Only use the VSM client in server at the same time can appear the problem. Suggest using distal independent client to login VSM server.
After start the network management, please don't pull out network cable casually, it is suggested that finish the hardware connection before install network management.