Optical and O/E Conversion Modules Supported by FusionCube for Network Interconnection

Publication Date:  2015-03-05 Views:  660 Downloads:  2
Issue Description
Network interconnection fails because the switch modules used by the customer and the E9000 server are incompatible. 
Handling Process
Select the optical modules, optical fibers, and network cables listed in the preceding table based on site configurations.
 If the customer network uses the GE networking mode, the CX310 switch module:
− Provides SFP optical ports and supports multi-mode and single-mode SFP optical modules.
− Supports SFP electrical modules.
 If the customer network uses the 10GE networking mode, the CX310 switch module:
− Provides SFP+optical ports and supports multi-mode and single-mode SFP+optical modules.
− Supports SFP+Direct Attached Cables and 1 m and 3 m passive cable connection

(1) The wavelength of the optical modules used by the E9000 server and the customer network must be the same.
(2) The optical fiber and the optical module must match.
Root Cause
FusionCube uses CX310 switch modules. The CX310 switch modules are only compatible with specific optical modules for interconnection with customer networks. The following table lists the optical modules and cables that are compatible with the CX310 switch module. 

END