This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Most people search for
Switches Routers Servers Storage Data Center Energy Cloud Computing
Search history

Support
Knowledge Base
Product followed successfully.

Failed to follow the product.

RH5885 V2 Raid card buzzer control method

Publication Date: 2014-07-01 Views: 544 Downloads: 0

Issue Description

RH5885 V2 Server ‘s Raid which has be configured is damage, or the hard disk is pulled out or replaced, etc, 2208 Raid card buzzer alarm will sound.

Alarm Information

buzzer alarm will sound.

Handling Process

1．When the RH5885server is starting, press "Ctrl + H" login 2208Raid Card configuration interface. Click "Start". As shown in Figure 1.

Figure 1
2．Get into Raid control Interface as shown in Figure 2, click "Controller Properties".

Figure 2
3．click“Next”, as shown in Figure 3.

Figure 3
4．click“Next”, as shown in Figure 4.

Figure 4
4．As shown in Figure 5, can choose the“Alarm Control”selection.
enable：turn on Buzzer.
disable：turn off Buzzer.
silence：Buzzer silence.
Click “Submit”。

Figure 5

Root Cause

RH5885 V2 Server ‘s Raid which has be configured is damage, or the hard disk is pulled out or replaced, etc

Suggestions

RH5885 V2 Server's Raid which has be configured is damage, or the hard disk is pulled out or replaced, etc, 2208 Raid card buzzer alarm will sound. It could turn off the buzzer switch by the Raid Card Controller.

END