No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
MENU

FAQ-How Do I Set a Proper Interval for Sending Beacon Frames

Publication Date:  2015-05-06 Views:  813 Downloads:  0
Issue Description
How Do I Set a Proper Interval for Sending Beacon Frames?
Solution

The AP sends Beacon frames at intervals, notifying a STA of the WLAN. The AP also notifies the STA that AP data will be sent to the STA based on the DTIM in Beacon frames.

When the interval at which Beacon frames are sent is set to 1000 ms, mobile device save more power. However, packets are buffered on the AP and are not sent to STAs immediately. As a result, there is a delay in sending ping packets and some packets are lost. It is recommended that the interval be set to 100 ms.

Run the beacon-interval command in the radio profile view to set the interval to 100 ms.

END