FAQ-When a Fit AP Is Upgraded in FTP Mode, the AP State Is Always download-fault. FTP and Links Are Working Properly, and the Upgrade File Is Downloaded From Huawei Support Website Without Changing the File Name. How Can I Solve This Problem

Publication Date:  2015-06-27 Views:  296 Downloads:  0
Issue Description
When a Fit AP Is Upgraded in FTP Mode, the AP State Is Always download-fault. FTP and Links Are Working Properly, and the Upgrade File Is Downloaded From Huawei Support Website Without Changing the File Name. How Can I Solve This Problem?
Solution
Run the display trapbuffer command to view the upgrade result.

#Feb 12 2014 15:40:15+03:00 SP.Core-1.1-SRU WLAN/4/AP_UPDATE_RESULT_NOTIFY:OID 1.3.6.1.4.1.2011.6.139.7.1.2 AP updates completely. (APID=2, UpdateResult=8, APMAC=[ac.4e.91.66.33.f0 (hex)])

The UpdateResult field indicates an error in the system software file content. Download the system software file again and verify the size of the downloaded file. The binary file transfer mode is recommended for transferring the file to the FTP server in FTP mode.

NOTE:
For the upgrade result, see section Collecting AP Upgrade Information below:

Collecting AP Upgrade Information

<AC6605>display ap-update status ap-idap-id  (Check the upgrade status of an AP.)

Upgrade alarms and logs:

Jul  9 2013 21:00:47+08:00 AC6005 WLAN/4/AP_UPDATE_RESULT_NOTIFY:OID 1.3.6.1.4.1.2011.6.139.7.1.2 AP updates completely. (APID=1,UpdateResult=11,APMAC=[dc.d2.fc.22.d9.60 (hex)],UpdateTime=2013-07-09 21:00:47,UpdateFileName=FitAP7X10XN_V200R003C00SPC100B031.bin,UpdateNextOper=0,UpdateStatus=failed(link down))

The upgrade result is displayed at the end of the alarms or logs.









END