No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-What Measures Should Be Taken When an AC Fails to Respond to the Discovery Packet Sent by an AP After the AP Obtains an IP Address

Publication Date:  2015-06-26 Views:  400 Downloads:  0
Issue Description
What Measures Should Be Taken When an AC Fails to Respond to the Discovery Packet Sent by an AP After the AP Obtains an IP Address?
Solution
Perform the following steps to locate the fault:

Check the AP authentication mode, blacklist, and whitelist.

    If the AP authentication fails, modify the configuration so that the AP can pass the authentication.

    If the AP authentication succeeds, go on with the following steps.

Check packet statistics on the AC to check whether the AC has received the Discovery packet (assuming that only one AP is connected to the AC).

    If the AC has received the Discovery packet, check whether the CAPWAP module processes the Discovery packet incorrectly.

    If not, check whether the wlan ac source command has been executed on the AC.

END