Step 1 Use the Auto Config tool to search for the IPC and view the IP address of the IPC.
The IPC has the plug-and-play function. When there is a DHCP server on the network, the DHCP server will assign an IP address to the IPC after the IPC is powered on.
For details about how to obtain the Auto Config tool, contact your service provider for assistance.
Step 2 Use the new IP address of the IPC to access the web page of the IPC.
To disable the plug-and-play function, access the web page of the IPC, choose Settings > Network Configuration > Network Parameters, and set the IPC IP address to a fixed IP address on the basic network parameter page.
Step 3 Check whether the fault is rectified.
If yes, no further operation is required.
If no, contact your service provider for assistance.