No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-What Can I Do If a Blue Screen Is Displayed When I Connect the VP9035A to an SD Video Source

Publication Date:  2015-08-06 Views:  272 Downloads:  0
Issue Description
I have connected the VP9035A to an SD video source. After I restart the VP9035A, a blue screen is displayed. Why and what can I do?
Solution
The video settings are incorrect, causing the endpoint to fail to detect SD signals.

Log in to the endpoint web interface. Choose Device Control > Device Control > Video Control > Video Input Source. Set Presentation Source to an SD video source. Then, you can select Local presentation in the video preview area to display the SD video source as the local presentation.

If you want to display the SD video source as the local video: After you perform the preceding operations, you can set Presentation Source to a non-SD video source and Video Source to an SD video source. Then, you can select the local video in the video preview area.

END