No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-Remote Control Malfunction After an Upgrade

Publication Date:  2015-08-11 Views:  421 Downloads:  0
Issue Description
After an RP series telepresence system upgrades from V100R001C01 to V100R001C02, its remote control does not respond.
Handling Process
Connect the USB connector of the IR control cable to the infrared USB port (shown in Figure 5-9) on the codec.

Figure 5-9 USB ports on the codec




Root Cause
In V100R001C02, one of the USB ports on the codec is dedicated to the USB connector of an IR control cable. If the remote control issue occurs, the USB connector of the IR control cable may not be connected to the infrared USB port.

END