No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Precautions for cascading disk enclosures

Publication Date:  2016-12-02 Views:  201 Downloads:  0
Issue Description
Precautions for cascading disk enclosures
Solution
Note the following when cascading disk enclosures:
1. Ensure that the model of the disk enclosure to be added is the same as that of the existing disk enclosure.
2. After disks are inserted and the disk enclosure is turned on, the disk enclosure is automatically powered on and started up.
3. After the disk enclosure is powered on, use cascading cables to connect the disk enclosure to the controller enclosure. The storage system can then automatically identify the new disk enclosure.
You do not need to suspend services when cascading disk enclosures. However, if disk enclosures are cascaded when services are running, a SAS/Fibre Channel loop or flapping may occur, adversely affecting the services. For this reason, to protect customer services and data security, suspend services and add disk enclosures during off-peak hours.

END