S9300&S9300E Hardware Description

This document describes hardware components of the S9300&S9300E, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about S9300&S9300E hardware components from this document.
Rate and give feedback :
Huawei utilise la traduction automatisée combinée à la relecture humaine pour traduire ce document dans différentes langues afin de vous aider à mieux en comprendre le contenu. Remarque : même la traduction automatisée la plus avancée ne peut égaler la qualité des traducteurs professionnels. Huawei décline toute responsabilité quant à l’exactitude des traductions et nous vous recommandons de consulter le document en anglais (lien fourni).
About This Document

About This Document

Intended Audience

This document is intended for network engineers responsible for network design and deployment. You should understand your network well, including the network topology and service requirements.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Command Conventions

The command conventions that may be found in this document are defined as follows.

Convention

Description

Boldface

The keywords of a command line are in boldface.

Italic

Command arguments are in italics.

[ ]

Items (keywords or arguments) in brackets [ ] are optional.

{ x | y | ... }

Optional items are grouped in braces and separated by vertical bars. One item is selected.

[ x | y | ... ]

Optional items are grouped in brackets and separated by vertical bars. One item is selected or no item is selected.

{ x | y | ... }*

Optional items are grouped in braces and separated by vertical bars. A minimum of one item or a maximum of all items can be selected.

[ x | y | ... ]*

Optional items are grouped in brackets and separated by vertical bars. Several items or no item can be selected.

&<1-n>

The parameter before the & sign can be repeated 1 to n times.

#

A line starting with the # sign is comments.

Disclaimer

This document is designed as a reference for you to configure your devices. Its contents, including web pages, command line input and output, are based on laboratory conditions. It provides instructions for general scenarios, but does not cover all use cases of all product models. The examples given may differ from your use case due to differences in software versions, models, and configuration files. When configuring your device, alter the configuration depending on your use case.

The specifications provided in this document are tested in lab environment (for example, the tested device has been installed with a certain type of boards or only one protocol is run on the device). Results may differ from the listed specifications when you attempt to obtain the maximum values with multiple functions enabled on the device.

Device Dimension Conventions

The dimensions described in this document are theoretically typical dimensions and do not include dimension tolerances.

Traduction
简体中文
Télécharger
Updated: 2018-06-20

N° document : EDOC1000013668

Vues :6421

Téléchargements: 1228

Average rating:
Documents associés
Share
Précédent Suivant