選択した言語が見つかりません。

このサイトはCookieを使用しています。 サイトを閲覧し続けることで、Cookieの使用に同意したものとみなされます。プライバシーポリシーを読む>

CX910 Switch Module V100R001C10 User Guide 15

This document describes the CX910 10GE switch module (CX910 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX910 whose 10GE switching planes use the software versions of 1.2.1.0.39, 2.00 and later.
Rate and give feedback :
この文書の日本語を含む他言語への翻訳は、元の文書の内容の理解を支援する目的で提供されています。翻訳には機械翻訳が利用され、人間による簡単な校正のみが行われています。 注: 最先端の機械翻訳を利用した場合でも、翻訳の品質はプロの翻訳者による翻訳ほど十分ではありません。ファーウェイは、翻訳の正確性についていかなる責任も負わないものとします。リンクを使用して、英語版の元の文書も同時に参照することを推奨します。
About This Document

About This Document

Purpose

This document describes the CX910 10GE switch module of the E9000 server in terms of its features, installation, removal, and configuration.

The product features and commands for the 10GE switching plane of the CX910 vary according to the software version. For details, see the documents listed in the following table.

NOTE:

Run the display version command in the switching plane CLI and select a reference document based on the Switch Version or Software Version displayed in the command output.

Huawei Support Website Version

10GE Switching Plane Software Version

Reference Document

V100R001C00 or V100R001C00SPCxxx

1.1.0.200.3

See the CX910 Switch Module V100R001C00 User Guide.

1.1.3.300.5

1.1.3.301.6

1.2.1.0.19

1.2.1.0.21

2.23

2.26

2.29

V100R001C10 or V100R001C10SPCxxx

1.2.1.0.39

See this guide.

Versions in the x.xx format, except 2.23, 2.26, and 2.29.

NOTE:

2.05 and later versions are displayed in the x.xx format.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Installation and commissioning engineers
  • Field maintenance engineers
  • System maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol Conventions

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

15

2018-09-20

This issue is the fifteenth official release.

14

2018-03-30

This issue is the fourteenth official release.

13

2017-09-14

This issue is the thirteenth official release, and includes the following changes:

Deleted the contents about FCoE in Functions, Advantages, Internal Chassis Networking.

12

2017-03-27

This issue is the twelfth official release, and includes the following changes:

  • Added product model descriptions to Appearance.
  • Modified the relationships between switching plane software versions and reference documents in About This Document.

11

2016-08-31

This issue is the eleventh official release, and includes the following changes:

Added the GE module to the logical structure diagram in Logical Architecture.

10

2016-03-31

This issue is the tenth official release, and includes the following changes:

09

2015-11-09

This issue is the ninth official release, and includes the following changes:

Added the long-term storage temperature and humidity to Technical Specifications.

08

2015-07-17

This issue is the eighth official release, and includes the following changes:

The reference to the throughput is added to Technical Specifications.

07

2015-02-16

This issue is the seventh official release, and includes the following changes:

The reference to the Networking Assistant is added to Internal Chassis Networking.

06

2015-01-23

This issue is the sixth official release, and includes the following changes:

The figure in Internal Chassis Networking is updated.

05

2014-11-10

This issue is the fifth official release.

04

2014-09-15

This issue is the fourth official release, and includes the following changes:

"Tecal" is deleted from the product document.

03

2014-05-13

This issue is the third official release.

02

2014-04-08

This issue is the second official release.

01

2014-01-02

This issue is the first official release.

ダウンロード
Updated: 2018-09-20

ドキュメント番号: EDOC1000036339

閲覧数:5074

ダウンロード: 214

Average rating:
This Document Applies to these Products
関連ドキュメント
Share
戻る 次へ