選択した言語が見つかりません。

このサイトはCookieを使用しています。 サイトを閲覧し続けることで、Cookieの使用に同意したものとみなされます。プライバシーポリシーを読む>

RH5885H V3 Server V100R003 User Guide 29

This document describes the appearance, specifications, parameters, and structure of the RH5885H V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
この文書の日本語を含む他言語への翻訳は、元の文書の内容の理解を支援する目的で提供されています。翻訳には機械翻訳が利用され、人間による簡単な校正のみが行われています。 注: 最先端の機械翻訳を利用した場合でも、翻訳の品質はプロの翻訳者による翻訳ほど十分ではありません。ファーウェイは、翻訳の正確性についていかなる責任も負わないものとします。リンクを使用して、英語版の元の文書も同時に参照することを推奨します。
About This Document

About This Document

Purpose

This document describes the appearance, functions, and structure of the RH5885H V3 rack server (RH5885H V3), and how to install, remove, and configure the server.

This document provides guidance for you to manage the RH5885H V3.

Intended Audience

This document is intended for:
  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

29

2018-10-16

Added Sensor List.

28

2018-09-03

Added Removing the Server and Holding Rails.

27

2018-07-23

Added the description about the video card.

26

2018-06-13

Updated Installing the RAID Controller Card.

25

2018-05-08

Updated Connecting a Ground Cable.

24

2018-02-26

Updated Logging In to the Server Over a Network Port Using the PuTTY and Logging In to the Server Over a Serial Port Using the PuTTY.

23

2017-11-30

Updated Product Specifications.

22

2017-08-08

Updated Removing a NIC.

21

2017-08-08

Updated Removing and Installing Parts of the RH5885H V3.

20

2017-07-20

Updated Configuring the BIOS.

19

2017-05-25

Updated Technical Specifications.

18

2017-04-22

Updated Connecting a Ground Cable.

17

2017-03-17

Updated Appearance.

16

2017-01-20

Updated Removing the Right Mounting Ear and Installing the Right Mounting Ear.

15

2016-12-30

Added (Optional) Removing the Front Bezel and (Optional) Installing the Front Bezel.

14

2016-11-20

Added Product Specifications.

13

2016-10-25

Added Safety Instructions.

12

2016-10-20

Updated Internal Cabling.

11

2016-10-08

Added Internal Cabling.

10

2016-06-01

Updated Physical Structure.

09

2016-05-10

Updated Appearance.

08

2016-03-29

Updated Physical Structure.

07

2016-01-18

Deleted "Removing an SD Card" and "Installing an SD Card".

06

2015-11-10

Updated Physical Structure.

05

2015-05-20

Added "Removing and Installing Mounting Ears".

04

2015-02-06

Combined the RH5885H V3 Server Installation Guide and RH5885H V3 Server Troubleshooting to form the RH5885H V3 Server User Guide.

03

2014-08-26

Deleted Tecal.

02

2014-07-20

Changed the bezel layout.

Added information about LSISAS3008 and LSISAS3108 controller cards.

01

2014-02-15

This issue is the first official release.

ダウンロード
Updated: 2018-10-24

ドキュメント番号: EDOC1000039570

閲覧数:33791

ダウンロード: 1748

Average rating:
This Document Applies to these Products
関連ドキュメント
Share
戻る 次へ