About This Document
Purpose
This document describes the process and methods of installing an operating system (OS) on Huawei servers. It also describes how to configure OS fault locating and troubleshoot faults that you may experience during installation.
Intended Audience
This document is intended for:
- Server installation personnel
- Server maintenance personnel
Symbol Conventions
The following table lists the symbols that may be found in this document.
Symbol |
Description |
|---|---|
|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue |
Date |
Description |
|---|---|---|
23 |
2018-08-22 |
Modified Installing Drivers on Windows. |
22 |
2018-07-28 |
|
21 |
2018-06-28 |
|
20 |
2018-05-07 |
Added How to Install a Windows Server 2016 Patch on the G2500 Server and How to Install a Linux GPU Driver on the G2500 Server. |
19 |
2018-03-29 |
|
18 |
2018-01-18 |
Added Blue Screen Is Displayed When the Server Reboots Upon Installation of Windows Server 2012 R2. |
17 |
2017-12-12 |
Added Installing VMware 6.X. |
16 |
2017-11-13 |
Added Acronyms and Abbreviations. |
15 |
2017-09-20 |
Added the description of OS configuration on V5 servers. |
14 |
2017-08-11 |
Added Red Hat Linux Displayed on the BIOS Boot Option Menu During the CentOS 6.X Installation in UEFI Mode. |
13 |
2017-07-22 |
|
12 |
2017-06-22 |
|
11 |
2017-05-22 |
Added the description of batch OS installation using eSight and uMate. |
10 |
2017-04-15 |
Modified Checking the Driver and Firmware Versions and Installing Drivers. |
09 |
2016-12-30 |
Revised to incorporate updates. |
08 |
2016-07-25 |
Revised to incorporate updates. |
07 |
2016-03-26 |
Revised to incorporate updates. |
06 |
2016-02-05 |
Revised to incorporate updates. |
05 |
2015-06-15 |
Added 10 Locating OS Faults. |
04 |
2014-09-18 |
Removed Tecal from the product name. |
03 |
2014-06-20 |
Added the notice of downloading drivers. |
02 |
2014-04-16 |
Updated the method of checking the driver version mapping. |
01 |
2014-03-01 |
First official release. |
戻る
