選択した言語が見つかりません。

このサイトはCookieを使用しています。 サイトを閲覧し続けることで、Cookieの使用に同意したものとみなされます。プライバシーポリシーを読む>

Huawei Server OS Installation Guide 24

This document describes the precautions and procedure for installing an operating system (OS) on the server and application scenarios.
Rate and give feedback :
この文書の日本語を含む他言語への翻訳は、元の文書の内容の理解を支援する目的で提供されています。翻訳には機械翻訳が利用され、人間による簡単な校正のみが行われています。 注: 最先端の機械翻訳を利用した場合でも、翻訳の品質はプロの翻訳者による翻訳ほど十分ではありません。ファーウェイは、翻訳の正確性についていかなる責任も負わないものとします。リンクを使用して、英語版の元の文書も同時に参照することを推奨します。
About This Document

About This Document

Purpose

This document describes the process and methods of installing an operating system (OS) on Huawei servers. It also describes how to configure OS fault locating and troubleshoot faults that you may experience during installation.

Intended Audience

This document is intended for:

  • Server installation personnel
  • Server maintenance personnel

Symbol Conventions

The following table lists the symbols that may be found in this document.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue

Date

Description

24

2018-09-19

Added the description of the command output displayed after driver check or installation to section 9-Installing Drivers and Firmware.

23

2018-08-22

Modified Installing Drivers on Windows.

22

2018-07-28

Added Configuring SAN Boot for Qlogic FC Cards.

21

2018-06-28

Added Configuring SAN Boot for Emulex FC Cards.

20

2018-05-07

Added How to Install a Windows Server 2016 Patch on the G2500 Server and How to Install a Linux GPU Driver on the G2500 Server.

19

2018-03-29

Added Installing an OS Using Smart Provisioning.

18

2018-01-18

Added Blue Screen Is Displayed When the Server Reboots Upon Installation of Windows Server 2012 R2.

17

2017-12-12

Added Installing VMware 6.X.

16

2017-11-13

Added Acronyms and Abbreviations.

15

2017-09-20

Added the description of OS configuration on V5 servers.

14

2017-08-11

Added Red Hat Linux Displayed on the BIOS Boot Option Menu During the CentOS 6.X Installation in UEFI Mode.

13

2017-07-22

Added (Optional) Setting UEFI Secure Boot.

12

2017-06-22

Added (Optional) Configuring SAN Boot for FC Cards.

11

2017-05-22

Added the description of batch OS installation using eSight and uMate.

10

2017-04-15

Modified Checking the Driver and Firmware Versions and Installing Drivers.

09

2016-12-30

Revised to incorporate updates.

08

2016-07-25

Revised to incorporate updates.

07

2016-03-26

Revised to incorporate updates.

06

2016-02-05

Revised to incorporate updates.

05

2015-06-15

Added 10 Locating OS Faults.

04

2014-09-18

Removed Tecal from the product name.

03

2014-06-20

Added the notice of downloading drivers.

02

2014-04-16

Updated the method of checking the driver version mapping.

01

2014-03-01

First official release.

ダウンロード
Updated: 2018-09-25

ドキュメント番号: EDOC1000040282

閲覧数:91662

ダウンロード: 22477

Average rating:
This Document Applies to these Products
関連ドキュメント
Share
戻る 次へ