選択した言語が見つかりません。

このサイトはCookieを使用しています。 サイトを閲覧し続けることで、Cookieの使用に同意したものとみなされます。プライバシーポリシーを読む>

RH5885 V3 Server V100R003 User Guide 29

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
この文書の日本語を含む他言語への翻訳は、元の文書の内容の理解を支援する目的で提供されています。翻訳には機械翻訳が利用され、人間による簡単な校正のみが行われています。 注: 最先端の機械翻訳を利用した場合でも、翻訳の品質はプロの翻訳者による翻訳ほど十分ではありません。ファーウェイは、翻訳の正確性についていかなる責任も負わないものとします。リンクを使用して、英語版の元の文書も同時に参照することを推奨します。
About This Document

About This Document

Purpose

This document describes the appearance, functions, and structure of the RH5885 V3 rack server (RH5885 V3), and how to install, remove, and configure the server.

This document provides guidance for you to manage the RH5885 V3.

Intended Audience

This document is intended for:
  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

29

2018-09-03

Removing the Server and Holding Rails is added.

28

2018-07-23

Added the description about the video card.

27

2018-06-13

Installing the RAID Controller Card is updated.

26

2018-05-08

Connecting a Ground Cable is updated.

25

2018-02-26

Logging In to the Server Over a Network Port Using the PuTTY and Logging In to the Server Over a Serial Port Using the PuTTY are updated.

24

2017-11-30

Product Configurations is updated.

23

2017-08-31

Removing the NIC is updated.

22

2017-08-08

Removing and Installing Parts of the RH5885 V3 is updated.

21

2017-07-20

Configuring the BIOS is updated.

20

2017-05-25

Technical Specifications is updated.

19

2017-04-22

Connecting a Ground Cable is updated.

18

2017-03-17

Product Positioning is updated.

17

2017-02-14

Removing and Installing Parts of the RH5885 V3 is updated.

16

2017-01-20

Removing the Right Mounting Ear and Installing the Right Mounting Ear are updated.

15

2016-12-30

(Optional) Removing the Front Bezel and (Optional) Installing the Front Bezel are added.

14

2016-12-05

Removing the System Battery is updated.

13

2016-10-25

Technical Specifications is updated.

12

2016-10-20

Internal Cabling is updated.

11

2016-10-08

Internal Cabling is added.

10

2016-08-16

Removing a CPU and Installing a CPU are updated.

09

2016-07-20

Removing a CPU and Installing a CPU are updated.

08

2016-06-01

Configuring the BIOS is updated.

07

2016-03-31

Product Configurations is updated.

06

2016-01-18

Removing the PSU Backplane and Installing the PSU Backplane are added.

05

2015-11-10

Product Overview is updated.

04

2015-05-20

The RH5885 V3 Server Installation Guide and RH5885 V3 Server Troubleshooting are combined to form the RH5885 V3 Server User Guide.

03

2014-08-26

Tecal is deleted.

02

2014-07-20

The server appearance is updated.

Add the contents of the LSISAS3008 and LSISAS3108 controller cards.

01

2014-02-25

This issue is the first official release.

ダウンロード
Updated: 2018-09-06

ドキュメント番号: EDOC1000040297

閲覧数:20564

ダウンロード: 1372

Average rating:
This Document Applies to these Products
関連ドキュメント
Share
戻る 次へ