選択した言語が見つかりません。

このサイトはCookieを使用しています。 サイトを閲覧し続けることで、Cookieの使用に同意したものとみなされます。プライバシーポリシーを読む>

RH8100 V3 Server V100R003 User Guide 25

This document describes the appearance, specifications, parameters, and structure of the RH8100 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
この文書の日本語を含む他言語への翻訳は、元の文書の内容の理解を支援する目的で提供されています。翻訳には機械翻訳が利用され、人間による簡単な校正のみが行われています。 注: 最先端の機械翻訳を利用した場合でも、翻訳の品質はプロの翻訳者による翻訳ほど十分ではありません。ファーウェイは、翻訳の正確性についていかなる責任も負わないものとします。リンクを使用して、英語版の元の文書も同時に参照することを推奨します。
About This Document

About This Document

Purpose

This document describes the appearance, functions, and structure of the RH8100 V3, and how to install, remove, power on, power off, and configure the RH8100 V3, and perform other common operations on the RH8100 V3.

This document provides guidance for you to manage the RH8100 V3.

Intended Audience

This document is intended for:
  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

25

2018-09-03

Switching from the Single-system to the Dual-system and Switching from the Dual-system to the Single-system are updated.

24

2018-07-23

Added the mapping between CPUs and HFCs.

23

2018-06-13

Removing the Rear I/O Board and Installing the Rear I/O Board are added.

22

2018-05-08

Connecting a Ground Cable is updated.

21

2018-02-26

Logical Structure is updated.

20

2017-11-30

Changing an iBMC User Password is updated.

19

2017-08-31

Configuring the BIOS is updated.

18

2017-07-20

Configuring the BIOS is updated.

17

2017-05-25

Technical Specifications is updated.

16

2017-04-22

Connecting a Ground Cable is updated.

15

2017-03-17

Compute Module is updated.

14

2017-01-20

Appearance is updated.

13

2016-11-20

Product Specifications is added.

12

2016-10-20

Replacing the FM-D and Its Internal Components is added.

11

2016-10-08

Ports is updated.

10

2016-06-01

Physical Structure is updated.

09

2016-05-10

Appearance is updated.

08

2016-03-29

Appearance is updated.

07

2016-01-18

Logical Structure is updated.

06

2015-11-10

Physical Structure is updated.

05

2015-05-20

The RH8100 V3 Server Installation Guide and RH8100 V3 Server Troubleshooting are combined to form the RH8100 V3 Server User Guide.

04

2015-01-08

A note is added for PXE configuration in Configuring the BIOS.

03

2014-11-20

The description of the FM-B in Front I/O Module is added.

02

2014-10-25

Physical Structure is updated.

01

2014-10-15

This issue is the first official release.

ダウンロード
Updated: 2018-09-06

ドキュメント番号: EDOC1000055733

閲覧数:15114

ダウンロード: 910

Average rating:
This Document Applies to these Products
関連ドキュメント
Share
戻る 次へ