選択した言語が見つかりません。

このサイトはCookieを使用しています。 サイトを閲覧し続けることで、Cookieの使用に同意したものとみなされます。プライバシーポリシーを読む>

X6800 Server HMM Command Reference 09

Rate and give feedback :
この文書の日本語を含む他言語への翻訳は、元の文書の内容の理解を支援する目的で提供されています。翻訳には機械翻訳が利用され、人間による簡単な校正のみが行われています。 注: 最先端の機械翻訳を利用した場合でも、翻訳の品質はプロの翻訳者による翻訳ほど十分ではありません。ファーウェイは、翻訳の正確性についていかなる責任も負わないものとします。リンクを使用して、英語版の元の文書も同時に参照することを推奨します。
About This Document

About This Document

Purpose

This document describes the underlying management software Hyper Management Module (HMM).

After reading this document, you can learn about the HMM functional modules, functions provided by each module, relationships between the modules, and all operation commands used on the HMM.

This document is used for the management module of X6800 server.

Intended Audience

This document is intended for:

  • Server installation engineers
  • Server maintenance engineers
NOTE:

This document describes commands for network deployment and maintenance of Huawei equipment.

This document does not include the commands for production, assembly, or detection of returned or repaired parts.

Incorrect use of the commands for engineering or fault location may cause device exceptions or service interruption. Contact Huawei technical support if you need to use these commands.

Only the professional or qualified personnel who can identify dangers in the server field can run the commands described in this document.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

09

2018-10-26

This issue is the ninth official release.

08

2018-05-28

This issue is the eighth official release.

07

2018-03-30

This issue is the seventh official release.

06

2017-04-07

This issue is the sixth official release.

05

2017-02-20

This issue is the fifth official release.

04

2016-11-20

This issue is the fourth official release.

03

2015-11-10

This issue is the third official release.

02

2015-07-13

This issue is the second official release.

01

2014-11-27

This issue is the first official release.

ダウンロード
Updated: 2018-11-06

ドキュメント番号: EDOC1000066338

閲覧数:8537

ダウンロード: 749

Average rating:
This Document Applies to these Products
関連ドキュメント
Share
戻る 次へ