選択した言語が見つかりません。

このサイトはCookieを使用しています。 サイトを閲覧し続けることで、Cookieの使用に同意したものとみなされます。プライバシーポリシーを読む>

X6800 Server V100R003 User Guide 13

This document describes the Huawei X6800 server (X6000 for short) in terms of its appearance, features, specifications, system components, device installation, cable connections, and installation verification.
Rate and give feedback :
この文書の日本語を含む他言語への翻訳は、元の文書の内容の理解を支援する目的で提供されています。翻訳には機械翻訳が利用され、人間による簡単な校正のみが行われています。 注: 最先端の機械翻訳を利用した場合でも、翻訳の品質はプロの翻訳者による翻訳ほど十分ではありません。ファーウェイは、翻訳の正確性についていかなる責任も負わないものとします。リンクを使用して、英語版の元の文書も同時に参照することを推奨します。
About This Document

About This Document

Purpose

This document describes the Huawei X6800 server (X6800 for short) in terms of its appearance, features, specifications, system components, device installation, cable connections, and installation verification.

This document provides guidance on how to install the X6800.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 13 (2018-09-05)

Optimized some figure display issues.

Issue 12 (2018-08-28)

  1. Added the description of snap-on guide rail installation methods for different chassis configurations. For details, see Installing a Chassis.
  2. Modified SN description. For details, see Panel.

Issue 11 (2018-05-24)

Added the server power-off procedue. For details, see Powering Off.

Issue 10 (2017-12-13)

Deleted descriptions about front SAS HDDs of the XH628 V3. For details, see Server Node Specifications.

Issue 09 (2017-07-05)

Modified environment parameter description and added description about heat dissipation restraints of different CPU models. For details, see Environment Specifications.

Issue 08 (2017-04-10)

This issue is the eighth official release, which incorporates the following changes:

Added the description about how to restore default HMM settings. For details, see Recovering the Default HMM Configuration.

Issue 07 (2017-04-01)

This issue is the seventh official release, which incorporates the following changes:

Modified the figures of guide rails, GPU temperature specifications, and the impact of parts replacement on the system.

Issue 06 (2016-07-18)

This issue is the sixth official release, which incorporates the following changes:

Added the description about how to install and remove a cable organizer and a snap-on track and how to connect 56G IB cables.

Issue 05 (2016-04-01)

This issue is the fifth official release.

Issue 04 (2015-11-10)

This issue is the forth official release.

Issue 03 (2015-07-13)

This issue is the third official release.

Issue 02 (2015-05-19)

This issue is the second official release.

Issue 01 (2015-02-06)

This issue is the first official release.

ダウンロード
Updated: 2018-09-06

ドキュメント番号: EDOC1000066339

閲覧数:15958

ダウンロード: 1640

Average rating:
This Document Applies to these Products
関連ドキュメント
Share
戻る 次へ