選択した言語が見つかりません。

このサイトはCookieを使用しています。 サイトを閲覧し続けることで、Cookieの使用に同意したものとみなされます。プライバシーポリシーを読む>

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003 Administrator Guide 12

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback :
この文書の日本語を含む他言語への翻訳は、元の文書の内容の理解を支援する目的で提供されています。翻訳には機械翻訳が利用され、人間による簡単な校正のみが行われています。 注: 最先端の機械翻訳を利用した場合でも、翻訳の品質はプロの翻訳者による翻訳ほど十分ではありません。ファーウェイは、翻訳の正確性についていかなる責任も負わないものとします。リンクを使用して、英語版の元の文書も同時に参照することを推奨します。
About This Document

About This Document

Purpose

This document describes how to perform daily management and basic maintenance of the OceanStor 18500 V3/18800 V3 storage systems. It also provides configuration and standards for your reference.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 12 (2018-05-30)

This issue is the twelfth official release. The updates are as follows:
  • Optimized some descriptions.

Issue 11 (2018-02-05)

This issue is the eleventh official release. The updates are as follows:
  • Optimized description about sections Configuring Domain Authentication for a Storage System.
  • Optimized description about sections Configuring a Security Policy.

Issue 10 (2017-11-30)

This issue is the tenth official release. The updates are as follows:
  • Optimized description about sections Powering on or off the Storage Device.
  • Optimized description about sections Bonding Ethernet Ports.

Issue 09 (2017-10-30)

This issue is the ninth official release. The updates are as follows:
  • Optimized description about the value starts of Base DN.
  • Optimized description about section Setting Domain Authentication Server Information.

Issue 08 (2017-07-20)

This issue is the eighth official release. The updates are as follows:

Added sections Creating a SmartErase Task, Deleting a SmartErase Task, and Logging In to the CLI of the Storage System Using a Public Key

Updates in Issue 07 (2017-05-10)

This issue is the seventh official release. The updates are as follows:
  • Added the section of Creating an LDAP User or User Group that describes how to configure LDAP users or user groups.
  • Updated the section of Setting the Syslog Notification (Applicable to V300R003C20) and added descriptions about how to configure Syslog server and CA certificates.
  • Added FAQ What are the principles used to expand the capacity of a file system for which the remote replication service is configured?.
  • Added FAQ How to query the IP address of the SVP host?
  • Added FAQ How to query the IP address of the SVP's Windows VM?
  • In Modifying the Settings for Dumping Performance Monitoring Statistics (Applicable to V300R003C00/V300R003C10) and Modifying the Settings for Dumping Performance Monitoring Statistics (Applicable to V300R003C20), added descriptions about how to obtain a performance monitoring file.

Issue 06 (2017-03-27)

This issue is the sixth official release. The updates are as follows:
  • Deleted descriptions about SUSE 9 operating systems.
  • Added methods of license capacity calculation for some value-added features to the sections of Applying for a License in Entitlement Activation Mode and Applying for a License in Password Activation Mode.

Issue 05 (2016-11-20)

This is the fifth official release. Information about V300R003C20 is added. The following lists the added and updated contents:
  • Added the section of Initially Configuring the Storage System (Applicable to V300R003C20) and information about domain names supported by NTP server addresses.
  • Added the section of Configuring a Storage System to Add It to an LDAP Domain (Applicable to V300R003C20) and updated screenshots and descriptions about interface parameters.
  • Added the section of Configuring a Security Policy (Applicable to V300R003C20) and the password policy that The new password cannot be the default password.
  • Added the section of Changing Password (Applicable to V300R003C20) and descriptions about changing passwords forcibly upon next login.
  • Added the section of Modifying Alarm Dump Settings (Applicable to V300R003C20) and information about domain names supported by alarm dump server addresses.
  • Added the section of Managing Trap Server Addresses (Applicable to V300R003C20) and information about domain names supported by Trap server addresses.
  • Added the section of Setting the Syslog Notification (Applicable to V300R003C20) to describe the configuration procedure of syslog notification in the certificate verification mode.
  • Added the section of Modifying the Settings for Dumping Performance Monitoring Statistics (Applicable to V300R003C20) and information about domain names supported by addresses of performance data dump servers.
  • Added the section of Logging In to the CLI of the Storage System (Engine's Management Network Port).
  • Added the section of Logging In to the CLI of the Storage System (Public Key) to describe how to use public key verification to log in to the CLI when the maintenance terminal connects to the engine's management port to manage the storage system.
  • Added the section of Setting the Device Time (Applicable to V300R003C20) and information about domain names supported by NTP server addresses.

Issue 04 (2016-07-25)

This is the fourth official release.

Optimized some description.

Issue 03 (2016-04-30)

This is the third official release. The updates are as follows:

  • Added the configuration procedure of anti-virus services.
  • Added the Logging In to the DeviceManager (Network Port Management) section.
  • Added the FAQ How Can I Modify the Outdated Password for Default User Maintainer of the SVP's Windows VM?.
  • Added the description of how many times should DHA logs be exported from DeviceManager.

Issue 02 (2015-12-10)

This is the second official release. The updates are as follows:

  • Added the Reclaiming Space of a Storage System section.
  • Added the Connection Change Between the Storage System and an Application Server section.
  • Added the Configuration the Disk Encryption Services section.
  • Added the FAQ How to Query the Mapping Between Host Disks and LUNs When the UltraPath Software Is Not Installed?.

Issue 01 (2015-08-30)

This is the first official release.

翻訳
简体中文
ダウンロード
Updated: 2018-06-05

ドキュメント番号: EDOC1000084074

閲覧数:10865

ダウンロード: 223

Average rating:
This Document Applies to these Products
関連ドキュメント
Share
戻る 次へ