選択した言語が見つかりません。

このサイトはCookieを使用しています。 サイトを閲覧し続けることで、Cookieの使用に同意したものとみなされます。プライバシーポリシーを読む>

KunLun 9032 V100R001 User Guide 10

This document describes the appearance, specifications, parameters, and structure of the KunLun 9032, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
この文書の日本語を含む他言語への翻訳は、元の文書の内容の理解を支援する目的で提供されています。翻訳には機械翻訳が利用され、人間による簡単な校正のみが行われています。 注: 最先端の機械翻訳を利用した場合でも、翻訳の品質はプロの翻訳者による翻訳ほど十分ではありません。ファーウェイは、翻訳の正確性についていかなる責任も負わないものとします。リンクを使用して、英語版の元の文書も同時に参照することを推奨します。
About This Document

About This Document

Intended Audience

This document describes the appearance, functions, and structure of the KunLun 9032 server. It also describes how to install and remove the server and its components, and how to perform basic configuration.

This document provides guidance for you to use the 9032 server.

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Important Notice

If your product model is 9032 L, refer to the KunLun 9016 Product Documentation at http://support.huawei.com/enterprise/productNewOffering?idAbsPath=7919749|9856522|21431182|21283284&pid=21283284&productname=9016&lang=en.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices, and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 10(2018-06-30)

The issue is the tenth official release, to which the iMS is added.

Issue 09(2018-04-13)

The issue is the ninth official release, to which description of resource expansion enclosure (REE) is added.

Issue 08 (2017-12-25)

The issue is the eighth official release, to which the maximum power consumption in typical configuration value is modified.

Issue 07 (2017-10-28)

The issue is the seventh official release, in which the back I/O module (BIO) names are modified following the same naming rule and the description of installing and removing front I/O module (FIO) internal components are updated.

Issue 06 (2017-05-12)

The issue is the sixth official release, in which the description of the FIO-B is added.

Issue 05 (2017-03-09)

The issue is the fifth official release, in which the KunLun logo is modified.

Issue 04 (2017-01-16)

The issue is the fourth official release, in which the following sections are modified:

  • Installing a Hot-Swappable PCIe Card
  • Installing a Non-Hot-Swappable PCIe Card
  • Logging In to the CMC WebUI
  • Installing a DIMM

Issue 03 (2016-11-29)

This issue is the third official release, which incorporates the following change:

The hot swap function is added.

Issue 02 (2016-10-19)

This issue is the second official release, which incorporates the following change:

The description of the 9032 L server is added.

Issue 01 (2016-01-25)

This issue is the first official release.

ダウンロード
Updated: 2018-07-24

ドキュメント番号: EDOC1000111846

閲覧数:15346

ダウンロード: 169

Average rating:
This Document Applies to these Products
関連ドキュメント
Share
戻る 次へ