選択した言語が見つかりません。

このサイトはCookieを使用しています。 サイトを閲覧し続けることで、Cookieの使用に同意したものとみなされます。プライバシーポリシーを読む>

KunLun Mission Critical Server V100R001 CMC User Guide 10

This document describes how to use the CMC WebUI and CLI to manage the KunLun 9016 and 9032 servers.
Rate and give feedback :
この文書の日本語を含む他言語への翻訳は、元の文書の内容の理解を支援する目的で提供されています。翻訳には機械翻訳が利用され、人間による簡単な校正のみが行われています。 注: 最先端の機械翻訳を利用した場合でも、翻訳の品質はプロの翻訳者による翻訳ほど十分ではありません。ファーウェイは、翻訳の正確性についていかなる責任も負わないものとします。リンクを使用して、英語版の元の文書も同時に参照することを推奨します。
About This Document

About This Document

Purpose

  • WebUI: describes the function, parameters, and operation method of each CMC web page.
  • CLI: describes the syntax, parameters, usage guidelines, and usage method of each CMC command.
NOTE:

This document describes only commands used for network deployment and maintenance of Huawei devices, and does not include commands used for production, device assembly, and return-to-repair.

Incorrect use of commands used only for engineering or troubleshooting may cause device exceptions or service interruption. Contact Huawei technical support to obtain these commands.

Intended Audience

This document is intended for:

  • Installation and commissioning engineers
  • Field maintenance engineers
  • System maintenance engineers
  • Network monitoring engineers
  • Network administrators

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol Conventions

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 10(2018-10-10)

This issue is the tenth official release, The SMTP Management is added.

Issue 09(2018-05-15)

This issue is the nineth official release, The LPAR operations are abstracted into an independent guide named KunLun Mission Critical Server LPAR User Guide.

Issue 08 (2018-03-20)

This issue is the eighth official release, which incorporates the changes on the KPAR page.

Issue 07 (2017-11-20)

This issue is the senventh official release, which incorporates the following changes:

The LPAR page is added.

Issue 06 (2017-09-18)

This issue is the sixth official release, which incorporates the following changes:

The forcible BIOS upgrade command is added.

The support for enabling the virtualization function of an 8-socket physical partition is added.

The parameter for updating the system key is refreshed.

Issue 05 (2017-05-12)

This issue is the fifth official release, which incorporates the following changes:

The description of the FIO-B is added.

The user mode of operation log is modified.

Issue 04 (2017-03-09)

This issue is the fourth official release, which incorporates the following changes:

The SNMP management function is added.

Issue 03 (2016-11-29)

This issue is the third official release, which incorporates the following changes:

The hot swap function is added.

Issue 02 (2016-08-30)

This issue is the second official release, which incorporates the following changes:

The description of the VM Support is available only for 4-socket physical partitions function is added.

Issue 01 (2016-01-25)

The issue is the first official release.

ダウンロード
Updated: 2018-10-18

ドキュメント番号: EDOC1000111850

閲覧数:6962

ダウンロード: 244

Average rating:
This Document Applies to these Products
関連ドキュメント
Share
戻る 次へ