About This Document
Purpose
This document describes hardware installation of storage systems, covering the following parts: precautions and preparations, installation flow, cabling, installation check, power-on, and status indicator check.
The following table lists the product models applicable to this document.
Product Series |
Product Model |
|---|---|
OceanStor 2000 V3 series |
OceanStor 2200 V3, 2600 V3, and 2600 V3 Video Surveillance Edition |
OceanStor 5000 V3 series |
OceanStor 5300 V3, 5500 V3, 5600 V3, and 5800 V3 |
OceanStor 6000 V3 series |
OceanStor 6800 V3 |
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Conventions
Symbol |
Description |
|---|---|
|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Updates between document issues are cumulative. Therefore, the latest document issue contains all updates made in previous issues.
Issue 08 (2018-07-30)
This is the eighth release.
Optimized some description.
Issue 07 (2018-06-30)
This is the seventh release.
Optimized some description.
Issue 06 (2018-05-09)
This is the sixth release.
Optimized the rollback operation of controller expansion.
Issue 05(2018-01-30)
This is the fifth release.
Added port failover network principles.
Issue 04 (2017-11-30)
This is the fourth release.
Optimized some description.
Issue 03 (2017-08-30)
This is the third release.
Updated the recommended number of disk enclosures that connect to a pair of SAS ports.
Issue 02 (2017-06-01)
This is the second release.
Updated the recommended number of disk enclosures that connect to a pair of SAS ports.
In Enabling the Syslog Notification Function, added descriptions about parameters of the Syslog notification.
Issue 01 (2017-02-28)
Initial commercial release.
戻る
