For the use of MA5200, it happens to the following two questions:
1. When address pool is used by static users, static user's PC does not configure fixed address but uses DHCP; it will prompt address pool failure alarm because user can pass authentication but cannot allocate address.
2. When user changes used address segment and does not interrupt the service, how to solve?
Set corresponding address pool as lock and carry out lock command under address pool view.
1. When static user passes authentication, refer to indexed address pool in index domain and it is found that all address pool is lock and there is no interaction of address allocation. So there is no alarm. There is still record at offline information.
2. For smoothing changeover of address segment, first add new address segment and then lock pre-deleted address segment. After users at old address segment are offline, delete address pool again.