Questo sito utilizza cookie di profilazione (propri e di terze parti) per ottimizzare la tua esperienza online e per inviarti pubblicità in linea con le tue preferenze. Continuando a utilizzare questo sito senza modificare le tue preferenze acconsenti all’uso dei cookie. Se vuoi saperne di più o negare il consenso a tutti o ad alcuni cookie clicca qui>
The website that you are visiting also provides Arabian language. Do you wish to switch language version?
يوفر موقع الويب الذي تزوره المحتوى باللغة العربية أيضًا. هل ترغب في تبديل إصدار اللغة؟
The website that you are visiting also provides Russia language Do you wish to switch language version?
Данный сайт есть в английской версии. Желаете ли Вы перейти на английскую версию?
The customer uses 10.77.77.77, the default IP address of the FC switch, to log in to the GUI and find that link indicators of some ports are alternately on and off. This may be caused by unstable links between blade servers and switch boards to which these ports correspond.
Use the serial port to log in to the FC switch CLI and run ipAddrSet to change the IP address of the FC switch. Use the new IP address to log in to the GUI of the FC switch and check that the link indicator of the port is continuously on and the link is stable.
Run ipAddrShow to view the IP address.
There are two T8000s onsite and each one is configured with one switch board. The two switch boards are connected through a network cable between base ports. The default IP addresses of FC switches are both 10.77.77.77. When the customer logs in to the GUI of one FC switch, the GUI is actually switched over between two switches. However, the two GUIs display different information, which makes link indicators of some ports are alternately on and off.