Related information about the product and version: the T3500
When the T3500 that is configured with the Areca RAID card is operating in Lunix SLC 4.6 science, one device reports an error, as shown in Figure 2-7. Figure 1-1 Error report sent by the system disk
After restart, the device recovers.
Step 1Upgrade the version of the firmware to 1.49 through the RAID card in inband mode. To upgrade the firmware version, five files need to be upgraded. For details, see 3.8 Upgrading the Firmware . Step 2According to the customer's OS version, upgrade the RAID card driver of the OS to a new version. For details, see 3.11 Upgrading the Areca RAID Card Driver. Step 3If the error is not reported when the customer performs operations and test programs after the related versions are upgraded, the fault is removed.