No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

How to achieve the MAC of USG firewall interface, to adapt to the application of particular environment

Publication Date:  2012-09-10 Views:  202 Downloads:  0
Issue Description
User need to use USG firewall to replace its former firewall. Do the MAC bonding on the up link device of the former network. If the USG firewall can’t go on the change of the out interface MAC bonding, will result in the network can not achieve interoperability.
Alarm Information
None
Handling Process
By creating virtual interface to realize the change of MAC, as follows:
1、create eth-trunk interface;
2、change eth-trunk interface MAC as old device MAC;
3、Let practical connective physical interface access to eth-trunk interface.
Root Cause
The MAC of USG firewall is write in physical interface,that is to say the MAC of  physical interface can not be changed by configuration.
Suggestions
None 

END